NEET Exam  >  NEET Tests  >  Topic-wise MCQ Tests for NEET  >  Case Based Questions Test: d & f-Block Elements - NEET MCQ

Case Based Questions Test: d & f-Block Elements - NEET MCQ


Test Description

20 Questions MCQ Test Topic-wise MCQ Tests for NEET - Case Based Questions Test: d & f-Block Elements

Case Based Questions Test: d & f-Block Elements for NEET 2024 is part of Topic-wise MCQ Tests for NEET preparation. The Case Based Questions Test: d & f-Block Elements questions and answers have been prepared according to the NEET exam syllabus.The Case Based Questions Test: d & f-Block Elements MCQs are made for NEET 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Case Based Questions Test: d & f-Block Elements below.
Solutions of Case Based Questions Test: d & f-Block Elements questions in English are available as part of our Topic-wise MCQ Tests for NEET for NEET & Case Based Questions Test: d & f-Block Elements solutions in Hindi for Topic-wise MCQ Tests for NEET course. Download more important topics, notes, lectures and mock test series for NEET Exam by signing up for free. Attempt Case Based Questions Test: d & f-Block Elements | 20 questions in 40 minutes | Mock test for NEET preparation | Free important questions MCQ to study Topic-wise MCQ Tests for NEET for NEET Exam | Download free PDF with solutions
Case Based Questions Test: d & f-Block Elements - Question 1

Read the passage given below and answer the following questions:

Within the 3d series, manganese exhibits oxidation states in aqueous solution from +2 to +7, ranging from Mn2+(aq) to MnO4 (aq). Likewise, iron forms both Fe2+(aq) and Fe3+(aq) as well as the FeO2−4 ion. Cr and Mn form oxyions CrO2−4, MnO4, owing to their willingness to form multiple bonds. The pattern with the early transition metals—in the 3d series up to Mn, and for the 4d, 5d metals up to Ru and Os—is that the maximum oxidation state corresponds to the number of ‘‘outer shell’’ electrons. The highest oxidation states of the 3d metals may depend upon complex formation (e.g., the stabilization of Co3+ by ammonia) or upon the pH (thus MnO42− (aq) is prone to disproportionation in acidic solution). Within the 3d series, there is considerable variation in relative stability of oxidation states, sometimes on moving from one metal to a neighbour; thus, for iron, Fe3+ is more stable than Fe2+, especially in alkaline conditions, while the reverse is true for cobalt. The ability of transition metals to exhibit a wide range of oxidation states is marked with metals such as vanadium, where the standard potentials can be rather small, making a switch between states relatively easy.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Highest oxidation state is exhibited by transition metal lying in the middle of the series.

Reason (R): The highest oxidation state exhibited corresponds to number of (n−1)d electrons.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 1
Higher oxidation states are usually exhibited by the members in the middle of a series of transition elements due to greater number of unpaired electrons in (n−1)d and ns orbitals at the middle of the series.
Case Based Questions Test: d & f-Block Elements - Question 2

Read the passage given below and answer the following questions:

Within the 3d series, manganese exhibits oxidation states in aqueous solution from +2 to +7, ranging from Mn2+(aq) to MnO4 (aq). Likewise, iron forms both Fe2+(aq) and Fe3+(aq) as well as the FeO2−4 ion. Cr and Mn form oxyions CrO2−4, MnO4, owing to their willingness to form multiple bonds. The pattern with the early transition metals—in the 3d series up to Mn, and for the 4d, 5d metals up to Ru and Os—is that the maximum oxidation state corresponds to the number of ‘‘outer shell’’ electrons. The highest oxidation states of the 3d metals may depend upon complex formation (e.g., the stabilization of Co3+ by ammonia) or upon the pH (thus MnO42− (aq) is prone to disproportionation in acidic solution). Within the 3d series, there is considerable variation in relative stability of oxidation states, sometimes on moving from one metal to a neighbour; thus, for iron, Fe3+ is more stable than Fe2+, especially in alkaline conditions, while the reverse is true for cobalt. The ability of transition metals to exhibit a wide range of oxidation states is marked with metals such as vanadium, where the standard potentials can be rather small, making a switch between states relatively easy.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Vanadium had the ability to exhibit a wide range of oxidation states.

Reason (R): The standard potentials Vanadium are rather small, making a switch between oxidation states relatively easy.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Case Based Questions Test: d & f-Block Elements - Question 3

Read the passage given below and answer the following questions:

Within the 3d series, manganese exhibits oxidation states in aqueous solution from +2 to +7, ranging from Mn2+(aq) to MnO4 (aq). Likewise, iron forms both Fe2+(aq) and Fe3+(aq) as well as the FeO2−4 ion. Cr and Mn form oxyions CrO2−4, MnO4, owing to their willingness to form multiple bonds. The pattern with the early transition metals—in the 3d series up to Mn, and for the 4d, 5d metals up to Ru and Os—is that the maximum oxidation state corresponds to the number of ‘‘outer shell’’ electrons. The highest oxidation states of the 3d metals may depend upon complex formation (e.g., the stabilization of Co3+ by ammonia) or upon the pH (thus MnO42− (aq) is prone to disproportionation in acidic solution). Within the 3d series, there is considerable variation in relative stability of oxidation states, sometimes on moving from one metal to a neighbour; thus, for iron, Fe3+ is more stable than Fe2+, especially in alkaline conditions, while the reverse is true for cobalt. The ability of transition metals to exhibit a wide range of oxidation states is marked with metals such as vanadium, where the standard potentials can be rather small, making a switch between states relatively easy.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): The highest oxidation states of the 3d metals depends only on electronic configuration of the metal.

Reason (R): The number of electrons in the (n-1) d and ns subshells determine the oxidation states exhibited by the metal.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 3

Explanation:


  • Assertion (A): The statement that the highest oxidation states of the 3d metals depend only on the electronic configuration of the metal is incorrect. The passage mentions that the highest oxidation states of the 3d metals may depend upon complex formation or pH conditions.

  • Reason (R): The statement that the number of electrons in the (n-1) d and ns subshells determine the oxidation states exhibited by the metal is correct. The passage discusses how the highest oxidation state corresponds to the number of 'outer shell' electrons.

  • Therefore, the assertion is incorrect while the reason is correct.

  • Hence, the correct answer is option D: Assertion is wrong statement but reason is correct statement.

  •  
Case Based Questions Test: d & f-Block Elements - Question 4

Read the passage given below and answer the following questions:

Within the 3d series, manganese exhibits oxidation states in aqueous solution from +2 to +7, ranging from Mn2+(aq) to MnO4 (aq). Likewise, iron forms both Fe2+(aq) and Fe3+(aq) as well as the FeO2−4 ion. Cr and Mn form oxyions CrO2−4, MnO4, owing to their willingness to form multiple bonds. The pattern with the early transition metals—in the 3d series up to Mn, and for the 4d, 5d metals up to Ru and Os—is that the maximum oxidation state corresponds to the number of ‘‘outer shell’’ electrons. The highest oxidation states of the 3d metals may depend upon complex formation (e.g., the stabilization of Co3+ by ammonia) or upon the pH (thus MnO42− (aq) is prone to disproportionation in acidic solution). Within the 3d series, there is considerable variation in relative stability of oxidation states, sometimes on moving from one metal to a neighbour; thus, for iron, Fe3+ is more stable than Fe2+, especially in alkaline conditions, while the reverse is true for cobalt. The ability of transition metals to exhibit a wide range of oxidation states is marked with metals such as vanadium, where the standard potentials can be rather small, making a switch between states relatively easy.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Fe3+ is more stable than Fe2+.

Reason (R): Fe3+ has 3d5 configuration while Fe2+ has 3d6 configuration.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 4
This can be understood as follows

Fe3+ has 3d5 , half filled configuration , whereas Fe2+ has 3d6 configuration.

Due to half filled , 3d5 stable configuration , the Fe3+ is more stable than the Fe2+.

Due to the same reason, the

B: Core of Fe3+ is more stable,

and C: IInd and IIIrd IP difference is less than 11.0 ev.

Case Based Questions Test: d & f-Block Elements - Question 5

Read the passage given below and answer the following questions:

Within the 3d series, manganese exhibits oxidation states in aqueous solution from +2 to +7, ranging from Mn2+(aq) to MnO4 (aq). Likewise, iron forms both Fe2+(aq) and Fe3+(aq) as well as the FeO2−4 ion. Cr and Mn form oxyanions CrO2−4, MnO4, owing to their willingness to form multiple bonds. The pattern with the early transition metals—in the 3d series up to Mn, and for the 4d, 5d metals up to Ru and Os—is that the maximum oxidation state corresponds to the number of ‘‘outer shell’’ electrons. The highest oxidation states of the 3d metals may depend upon complex formation (e.g., the stabilization of Co3+ by ammonia) or upon the pH (thus MnO42− (aq) is prone to disproportionation in acidic solution). Within the 3d series, there is considerable variation in relative stability of oxidation states, sometimes on moving from one metal to a neighbour; thus, for iron, Fe3+ is more stable than Fe2+, especially in alkaline conditions, while the reverse is true for cobalt. The ability of transition metals to exhibit a wide range of oxidation states is marked with metals such as vanadium, where the standard potentials can be rather small, making a switch between states relatively easy.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Transition metals like Fe, Cr and Mn form oxyions.

Reason (R): Oxygen is highly electronegative and has a tendency to form multiple bonds.

Case Based Questions Test: d & f-Block Elements - Question 6

Read the passage given below and answer the following questions:

The transition metals when exposed to oxygen at low and intermediate temperatures form thin, protective oxide films of up to some thousands of Angstroms in thickness. Transition metal oxides lie between the extremes of ionic and covalent binary compounds formed by elements from the left or right side of the periodic table. They range from metallic to semiconducting and deviate by both large and small degrees from stoichiometry. Since d-electron bonding levels are involved, the cations-exist in various valence states and hence give rise to a large number of oxides. The crystal structures are often classified by considering a cubic or hexagonal close-packed lattice of one set of ions with the other set of ions filling the octahedral or tetrahedral interstices. The actual oxide structures, however, generally show departures from such regular arrays due in part to distortions caused by packing of ions of different size and to ligand field effects. These distortions depend not only on the number of d-electrons but also on the valence and the position of the transition metal in a period or group.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Cations of transition elements occur in various valence states

Reason (R): Large number of oxides of transition elements are possible.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 6
The lowest oxide of transition metal is basic because of some valence electron are not involved in bonding thus act as a base due to the availability of free electrons. The highest oxide of transition metal electrons of metal is involved in the bonding. Therefore, these electrons are not available for donation. Hence, they are acidic in nature.
Case Based Questions Test: d & f-Block Elements - Question 7

Read the passage given below and answer the following questions:

The transition metals when exposed to oxygen at low and intermediate temperatures form thin, protective oxide films of up to some thousands of Angstroms in thickness. Transition metal oxides lie between the extremes of ionic and covalent binary compounds formed by elements from the left or right side of the periodic table. They range from metallic to semiconducting and deviate by both large and small degrees from stoichiometry. Since d-electron bonding levels are involved, the cations-exist in various valence states and hence give rise to a large number of oxides. The crystal structures are often classified by considering a cubic or hexagonal close-packed lattice of one set of ions with the other set of ions filling the octahedral or tetrahedral interstices. The actual oxide structures, however, generally show departures from such regular arrays due in part to distortions caused by packing of ions of different size and to ligand field effects. These distortions depend not only on the number of d-electrons but also on the valence and the position of the transition metal in a period or group.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Transition metals form protective oxide films.

Reason (R): Oxides of transition metals are always stoichiometric.

Case Based Questions Test: d & f-Block Elements - Question 8

Read the passage given below and answer the following questions:

The transition metals when exposed to oxygen at low and intermediate temperatures form thin, protective oxide films of up to some thousands of Angstroms in thickness. Transition metal oxides lie between the extremes of ionic and covalent binary compounds formed by elements from the left or right side of the periodic table. They range from metallic to semiconducting and deviate by both large and small degrees from stoichiometry. Since d-electron bonding levels are involved, the cations-exist in various valence states and hence give rise to a large number of oxides. The crystal structures are often classified by considering a cubic or hexagonal close-packed lattice of one set of ions with the other set of ions filling the octahedral or tetrahedral interstices. The actual oxide structures, however, generally show departures from such regular arrays due in part to distortions caused by packing of ions of different size and to ligand field effects. These distortions depend not only on the number of d-electrons but also on the valence and the position of the transition metal in a period or group.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Crystal structure of oxides of transition metals often show defects.

Reason (R): Ligand field effect cause distortions in crystal structures.

Case Based Questions Test: d & f-Block Elements - Question 9

Read the passage given below and answer the following questions:

The transition metals when exposed to oxygen at low and intermediate temperatures form thin, protective oxide films of up to some thousands of Angstroms in thickness. Transition metal oxides lie between the extremes of ionic and covalent binary compounds formed by elements from the left or right side of the periodic table. They range from metallic to semiconducting and deviate by both large and small degrees from stoichiometry. Since d-electron bonding levels are involved, the cations-exist in various valence states and hence give rise to a large number of oxides. The crystal structures are often classified by considering a cubic or hexagonal close-packed lattice of one set of ions with the other set of ions filling the octahedral or tetrahedral interstices. The actual oxide structures, however, generally show departures from such regular arrays due in part to distortions caused by packing of ions of different size and to ligand field effects. These distortions depend not only on the number of d-electrons but also on the valence and the position of the transition metal in a period or group.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): CrO crystallises in a hexagonal closepacked array of oxide ions with two out of every three octahedral holes occupied by chromium ions.

Reason (R): Transition metal oxide may be hexagonal close-packed lattice of oxide ions with metal ions filling the octahedral voids.

Case Based Questions Test: d & f-Block Elements - Question 10

Read the passage given below and answer the following questions:

The d block elements are the 40 elements contained in the four rows of ten columns (3-12) in the periodic table. As all the d block elements are metallic, the term d-block metals is synonymous. This set of d-block elements is also often identified as the transition metals, but sometimes the group 12 elements (zinc, cadmium, mercury) are excluded from the transition metals as the transition elements are defined as those with partly filled d or f shells in their compounds. Inclusion of the elements zinc, cadmium and mercury is necessary as some properties of the group 12 elements are appropriate logically to include with a discussion of transition metal chemistry. The term transition element or transition metal appeared to derive from early studies of periodicity such as the Mendeleev periodic table of the elements. His horizontal table of the elements was an attempt to group the elements together so that the chemistry of elements might be explained and predicted. In this table there are eight groups labeled I-VIII with each subdivided into A and B subgroups. Mendeleev recognized that certain properties of elements in Group VIII are related to those of some of the elements in Group VII and those at the start of the next row Group I. In that sense, these elements might be described as possessing properties transitional from one row of the table to the next.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Group 12 elements are not considered as transition metals.

Reason (R): Transition metals are those which have incompletely filled d shell in their compounds.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 10
Transition metals are those metals who have partially filled d-orbital means not fully filled. But In group 12 elements zn,Cd and Hg have fully filled d-orbital. That's why they are not considered as transition metals.
Case Based Questions Test: d & f-Block Elements - Question 11

Read the passage given below and answer the following questions:

The d block elements are the 40 elements contained in the four rows of ten columns (3-12) in the periodic table. As all the d block elements are metallic, the term d-block metals is synonymous. This set of d-block elements is also often identified as the transition metals, but sometimes the group 12 elements (zinc, cadmium, mercury) are excluded from the transition metals as the transition elements are defined as those with partly filled d or f shells in their compounds. Inclusion of the elements zinc, cadmium and mercury is necessary as some properties of the group 12 elements are appropriate logically to include with a discussion of transition metal chemistry. The term transition element or transition metal appeared to derive from early studies of periodicity such as the Mendeleev periodic table of the elements. His horizontal table of the elements was an attempt to group the elements together so that the chemistry of elements might be explained and predicted. In this table there are eight groups labeled I-VIII with each subdivided into A and B subgroups. Mendeleev recognized that certain properties of elements in Group VIII are related to those of some of the elements in Group VII and those at the start of the next row Group I. In that sense, these elements might be described as possessing properties transitional from one row of the table to the next.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Group VII elements of Mendeleev periodic table are transition elements.

Reason (R): Group I –VIII in Mendeleev periodic table is divided into two subgroups, A and B.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 11
In Mendeleev's periodic table, the groups were divided into two subgroups. Groups from I to VII are meant for normal elements and group VIII is for transition elements. Groups from I to VII have been divided into two subgroups, while group VIII is meant for three elements.
Case Based Questions Test: d & f-Block Elements - Question 12

Read the passage given below and answer the following questions:

The d block elements are the 40 elements contained in the four rows of ten columns (3-12) in the periodic table. As all the d block elements are metallic, the term d-block metals is synonymous. This set of d-block elements is also often identified as the transition metals, but sometimes the group 12 elements (zinc, cadmium, mercury) are excluded from the transition metals as the transition elements are defined as those with partly filled d or f shells in their compounds. Inclusion of the elements zinc, cadmium and mercury is necessary as some properties of the group 12 elements are appropriate logically to include with a discussion of transition metal chemistry. The term transition element or transition metal appeared to derive from early studies of periodicity such as the Mendeleev periodic table of the elements. His horizontal table of the elements was an attempt to group the elements together so that the chemistry of elements might be explained and predicted. In this table there are eight groups labeled I-VIII with each subdivided into A and B subgroups. Mendeleev recognized that certain properties of elements in Group VIII are related to those of some of the elements in Group VII and those at the start of the next row Group I. In that sense, these elements might be described as possessing properties transitional from one row of the table to the next.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): All d block elements are metallic in nature.

Reason (R): The d –block elements belong to Group 3 -12 of the periodic table.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 12
Transition Elements are so named, indicating their positioning and transition of properties between, s and p block elements. So, all the transition metals are d block elements but all d block elements are not transition elements.
Case Based Questions Test: d & f-Block Elements - Question 13

Read the passage given below and answer the following questions:

The d block elements are the 40 elements contained in the four rows of ten columns (3-12) in the periodic table. As all the d block elements are metallic, the term d-block metals is synonymous. This set of d-block elements is also often identified as the transition metals, but sometimes the group 12 elements (zinc, cadmium, mercury) are excluded from the transition metals as the transition elements are defined as those with partly filled d or f shells in their compounds. Inclusion of the elements zinc, cadmium and mercury is necessary as some properties of the group 12 elements are appropriate logically to include with a discussion of transition metal chemistry. The term transition element or transition metal appeared to derive from early studies of periodicity such as the Mendeleev periodic table of the elements. His horizontal table of the elements was an attempt to group the elements together so that the chemistry of elements might be explained and predicted. In this table there are eight groups labeled I-VIII with each subdivided into A and B subgroups. Mendeleev recognized that certain properties of elements in Group VIII are related to those of some of the elements in Group VII and those at the start of the next row Group I. In that sense, these elements might be described as possessing properties transitional from one row of the table to the next.

In the following questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices on the basis of the above passage.

Assertion (A): Nickel is a transition element that belongs to group 10 and period 4 of the modern periodic table.

Reason (R): Electronic configuration of Nickel is [Ar]183d84s2

Case Based Questions Test: d & f-Block Elements - Question 14

Read the passage given below and answer the following questions:

In transition elements, generally, ions of the same charge in a given series show progressive decrease in radius with increasing atomic number. This is because the new electron enters a d orbital each time the nuclear charge increases by unity. But the radii of the third (5d) series are virtually the same as those of the corresponding members of the second series. This phenomenon is associated with the intervention of the 4f orbitals which must be filled before the 5d series of elements begin. The filling of 4f before 5d orbital results in a regular decrease in atomic radii called Lanthanoid contraction. In these questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices.

Following are the transition metal ions of 3d series: Ti4+, V2+, Mn3+, Cr3+ (Atomic number: Ti = 22, V = 23, Mn = 25, Cr = 24)

Assertion (A): Among the given ions, Cr3+ is the most stable in an aqueous environment.

Reason (R): Cr3+ has half filled t32g.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 14
Cr3+, half filled t32g.
Case Based Questions Test: d & f-Block Elements - Question 15

Read the passage given below and answer the following questions: In transition elements, generally, ions of the same charge in a given series show progressive decrease in radius with increasing atomic number. This is because the new electron enters a d orbital each time the nuclear charge increases by unity. But the radii of the third (5d) series are virtually the same as those of the corresponding members of the second series. This phenomenon is associated with the intervention of the 4f orbitals which must be filled before the 5d series of elements begin. The filling of 4f before 5d orbital results in a regular decrease in atomic radii called Lanthanoid contraction. In these questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices.

Following are the transition metal ions of 3d series: Ti4+, V2+, Mn3+, Cr3+ (Atomic number: Ti = 22, V = 23, Mn = 25, Cr = 24)

Assertion (A): Among the given ions, Mn3+ is the most strong oxidizing agent.

Reason (R): Mn3+ has an unstable configuration.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 15
Mn3+ is the strong oxidising agent because it has 4 electrons in its valence shell and when it gains one electron than it forms Mn2+, it results in the half-filled (d5) configuration that provides extra stability.
Case Based Questions Test: d & f-Block Elements - Question 16

Read the passage given below and answer the following questions: In transition elements, generally, ions of the same charge in a given series show progressive decrease in radius with increasing atomic number. This is because the new electron enters a d orbital each time the nuclear charge increases by unity. But the radii of the third (5d) series are virtually the same as those of the corresponding members of the second series. This phenomenon is associated with the intervention of the 4f orbitals which must be filled before the 5d series of elements begin. The filling of 4f before 5d orbital results in a regular decrease in atomic radii called Lanthanoid contraction. In these questions, a statement of assertion followed by a statement of reason is given. Choose the correct answer out of the following choices.

Following are the transition metal ions of 3d series: Ti4+, V2+, Mn3+, Cr3+ (Atomic number: Ti = 22, V = 23, Mn = 25, Cr = 24)

Assertion (A): Ti4+ ion is colourless.

Reason (R): All valence electrons are unpaired in Ti4+ ion.

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 16
Ti4+, No unpaired electrons.
Case Based Questions Test: d & f-Block Elements - Question 17

Read the passage given below and answer the following questions:

Although actinoids are similar to lanthanoids in that their electrons fill the 5f orbitals in order, their chemical properties are not uniform and each element has characteristic properties. Promotion of 5f - 6d electrons does not require a large amount of energy and examples of compounds with ππacid ligands are known in which all the 5f, 6d, 7s, and 7p orbitals participate in bonding. Trivalent compounds are the most common, but other oxidation states are not uncommon. Especially thorium, protactinium, uranium, and neptunium tend to assume the +4 or higher oxidation state. The following questions are multiple choice questions. Choose the most appropriate answer:

Q. Which of the following oxidation state is common for all lanthanoids?

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 17
All of the lanthanide elements are commonly known to have the +3 oxidation state.
Case Based Questions Test: d & f-Block Elements - Question 18

Read the passage given below and answer the following questions:

Although actinoids are similar to lanthanoids in that their electrons fill the 5f orbitals in order, their chemical properties are not uniform and each element has characteristic properties. Promotion of 5f - 6d electrons does not require a large amount of energy and examples of compounds with ππacid ligands are known in which all the 5f, 6d, 7s, and 7p orbitals participate in bonding. Trivalent compounds are the most common, but other oxidation states are not uncommon. Especially thorium, protactinium, uranium, and neptunium tend to assume the +4 or higher oxidation state. The following questions are multiple choice questions. Choose the most appropriate answer:

Q. There are 14 elements in actinoid series. Which of the following element does not belong to this series?

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 18
Tm is Thulium which belongs to Lanthanoids. Uranium(U), Neptunium(Np), Fermium(Fm) belong to Actinoid series.
Case Based Questions Test: d & f-Block Elements - Question 19

Read the passage given below and answer the following questions:

Although actinoids are similar to lanthanoids in that their electrons fill the 5f orbitals in order, their chemical properties are not uniform and each element has characteristic properties. Promotion of 5f - 6d electrons does not require a large amount of energy and examples of compounds with ππacid ligands are known in which all the 5f, 6d, 7s, and 7p orbitals participate in bonding. Trivalent compounds are the most common, but other oxidation states are not uncommon. Especially thorium, protactinium, uranium, and neptunium tend to assume the +4 or higher oxidation state. The following questions are multiple choice questions. Choose the most appropriate answer:

Q. Gadolinium belongs to 4f series. Its atomic number is 64. Which of the following is the correct electronic configuration of Gadolinium?

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 19
Gadolinium has an electronic configuration of [Xe] 4f 75d16s2.
Case Based Questions Test: d & f-Block Elements - Question 20

Read the passage given below and answer the following questions:

Although actinoids are similar to lanthanoids in that their electrons fill the 5f orbitals in order, their chemical properties are not uniform and each element has characteristic properties. Promotion of 5f - 6d electrons does not require a large amount of energy and examples of compounds with ππacid ligands are known in which all the 5f, 6d, 7s, and 7p orbitals participate in bonding. Trivalent compounds are the most common, but other oxidation states are not uncommon. Especially thorium, protactinium, uranium, and neptunium tend to assume the +4 or higher oxidation state. The following questions are multiple choice questions. Choose the most appropriate answer:

Q. General electronic configuration of actinoids is (n – 2)f1–14 (n – 1)d0–2 ns2. Which of the following actinoids have one electron in 6d orbital?

Detailed Solution for Case Based Questions Test: d & f-Block Elements - Question 20
Uranium has an electronic configuration of 5f3 6d1 7s2.
9 docs|1272 tests
Information about Case Based Questions Test: d & f-Block Elements Page
In this test you can find the Exam questions for Case Based Questions Test: d & f-Block Elements solved & explained in the simplest way possible. Besides giving Questions and answers for Case Based Questions Test: d & f-Block Elements, EduRev gives you an ample number of Online tests for practice

Top Courses for NEET

Download as PDF

Top Courses for NEET