Description

This mock test of 28 Year NEET Questions: Alternating Current for NEET helps you for every NEET entrance exam.
This contains 36 Multiple Choice Questions for NEET 28 Year NEET Questions: Alternating Current (mcq) to study with solutions a complete question bank.
The solved questions answers in this 28 Year NEET Questions: Alternating Current quiz give you a good mix of easy questions and tough questions. NEET
students definitely take this 28 Year NEET Questions: Alternating Current exercise for a better result in the exam. You can find other 28 Year NEET Questions: Alternating Current extra questions,
long questions & short questions for NEET on EduRev as well by searching above.

QUESTION: 1

Eddy currents are produced when [1988]

Solution:

Eddy currents are produced when a metal is

kept in a varying magnetic field.

QUESTION: 2

Energy in a current carrying coil is stored in theform of [1988]

Solution:

Energy stored in a coil =

where, L is the self-inductance and i the

current flowing through the inductor. Thus,

energy is stored in the magnetic field of the

coil.

QUESTION: 3

In a region of uniform magnetic inductionB = 10^{–2} tesla, a circular coil of radius 30 cm andresistance π^{2} ohm is rotated about an axis whichis perpendicular to the direction of B and whichforms a diameter of the coil. If the coil rotates at 200 rpm the amplitude of the alternating currentinduced in the coil is [1988]

Solution:

Given, n = 1, B = 10^{–2} T,

A = π(0.3)2m2, R = π^{2}

f= (200/60) and ω = 2π(200/60)

Substituting these values and solving, we

get

I_{0} = 6 × 10^{–3} A = 6mA

QUESTION: 4

In the circuit of Fig, the bulb will become suddenly bright if [1989]

Solution:

When contact is broken, current in the circuit decreases. To oppose the inductor releases current and emf is induced. This induced emf is having high value. Hence, The bulb will become suddenly bright.

The correct option is C.

QUESTION: 5

In which of the following, emission of electronsdoes not take place [1990]

Solution:

**Thermionic emission **: When a metal is

heated to a high temperature, the free

electrons gain kinetic energy and escape

from the surface of the metal.

**Secondary emission **: When an electron

strikes the surface of a metallic plate, it emits

other electrons from the surface.

**Photoelectric emission** : Emission of

electrons from the metal surface on irradiation

with radiation of suitable frequency.

**X-rays emission** : High speed electrons

(emitted from a filament) striking a target

(a copper block) to emit X-rays.

QUESTION: 6

The time constant of C–R circuit is [1992]

Solution:

The time constant for resonance circuit,

C = CR

Growth of charge in a circuit containing

capacitance and resistance is given by the

formula,

CR is known as time constant in this formula.

QUESTION: 7

In an a.c. circuit, the r.m.s. value of current, i_{rms }is related to the peak current, i_{0} by the relation

Solution:

QUESTION: 8

An LCR series circuit is connected to a source of alternating current. At resonance, the applied voltage and the current flowing through the circuit will have a phase difference of [1994]

Solution:

At resonance, The circuit

behaves as if it contains R only. So, phase

difference = 0

At resonance, impedance is minimum Z_{min} =

R and current is maximum, given by

It is interesting to note that before resonance

the current leads the applied emf, at

resonance it is in phase, and after resonance

it lags behind the emf. LCR series circuit is

also called as acceptor circuit and parallel

LCR circuit is called rejector circuit.

QUESTION: 9

In an experiment, 200 V A.C. is applied at theends of an LCR circuit. The circuit consists ofan inductive reactance (XL ) = 50 Ω, capacitivereactance (XC ) = 50 Ω and ohmic resistance (R)= 10 Ω. The impedance of the circuit is[1996]

Solution:

Given : Supply voltage (V_{ac}) = 200 V

Inductive reactance (X_{L}) = 50 Ω

Capacitive reactance (X_{C}) = 50 Ω

Ohmic resistance (R) = 10 Ω.

We know that impedance of the LCR circuit

QUESTION: 10

In an A.C. circuit with voltage V and current I the power dissipated is [1997]

Solution:

Power dissipated = E_{rms}. I_{rms} = (E_{rms}) (I_{rms})

cos θ

Hence, power dissipated depends upon

phase difference.

QUESTION: 11

The primary winding of a transformer has 500 turns whereas its secondary has 5000 turns. Theprimary is connected to an A.C. supply of 20 V,50 Hz. The secondary will have an output of [1997]

Solution:

The transformer converts A.C. high voltage

into A.C. low voltage, but it does not cause

any change in frequency. The formula for

voltage is

Thus, output has voltage 200 V and

frequency 50 Hz.

QUESTION: 12

A step-up transformer operates on a 230 V lineand supplies a load of 2 ampere. The ratio of theprimary and secondary windings is 1 : 25. Thecurrent in the primary is [1998]

Solution:

∴ E_{s} = 25 E_{p}

But E_{s}I_{s} = E_{p}I_{p}

25E_{p} × 2 = E_{p} × I_{p} ⇒ I_{p} = 5 0 A

QUESTION: 13

An inductance L having a resistance R is connected to an alternating source of angular frequency ω. The quality factor Q of the

inductance is [2000]

Solution:

Quality factor

QUESTION: 14

A capacitor has capacity C and reactance X. Ifcapacitance and frequency become double, thenreactance will be [2001]

Solution:

Capacitive reactance,

QUESTION: 15

In a series resonant circuit, having L, C and R as its elements, the resonant current is i. The power dissipated in the circuit at resonance is [2002]

Solution:

At resonance

Current through circuit i =E/R

Power dissipated at Resonance = i^{2}R

QUESTION: 16

A coil of 40 henry inductance is connected inseries with a resistance of 8 ohm and thecombination is joined to the terminals of a 2 voltbattery. The time constant of the circuit is [2004]

Solution:

Time constant is L/R

Given, L = 40H & R = 8Ω

∴ τ = 40/8 = 5 sec

QUESTION: 17

In a circuit, L, C and R are connected in series with an alternating voltage source of frequency f. The current leads the voltage by 45°. The value of C is [2005]

Solution:

QUESTION: 18

A coil of inductive reactance 31 Ω has aresistance of 8 Ω. It is placed in series with acondenser of capacitative reactance 25Ω. Thecombination is connected to an a.c. source of110 volt. The power factor of the circuit is[2006]

Solution:

QUESTION: 19

The core of a transformer is laminated because [2006]

Solution:

When there is change of flux in the core of a

transformer due to change in current around

it, eddy current is produced. The direction

of this current is opposite to the current

which produces it, so it will reduce the main

current. We laminate the core so that flux is

reduced resulting in the reduced production

of eddy current.

QUESTION: 20

A transistor-oscillator using a resonant circuitwith an inductor L (of negligible resistance) anda capacitor C in series produce oscillations offrequency f. If L is doubled and C is changed to4C, the frequency will be [2006]

Solution:

We know that frequency of electrical

oscillation in L.C. circuit is

QUESTION: 21

The primary and secondary coil of a transformerhave 50 and 1500 turns respectively. If themagnetic flux φ linked with the primary coil isgiven by φ= φ_{0} + 4t, where φ is in webers, t is timein seconds and φ_{0} is a constant, the outputvoltage across the secondary coil is [2007]

Solution:

Where

N_{s} = No. of turns across primary coil = 50

N_{p} = No. of turns across secondary coil

= 1500

QUESTION: 22

A transformer is used to light a 100 W and 110 Vlamp from a 220 V mains. If the main current is 0.5amp, the efficiency of the transformer isapproximately [2007]

Solution:

Efficiency of the transformer

QUESTION: 23

What is the value of inductance L for which the current is maximum in a series LCR circuit with C = 10 μF and ω = 1000s ^{-1} ? [2007]

Solution:

Condition for which the current is maximum

in a series LCR circuit is,

= L = 100 mH

QUESTION: 24

In an a.c circuit the e.m.f. (e) and the current (i) at any instant are given respectively by

e = E_{0} sin ωt [2008]

i = I_{0} sin (ωt –φ)

The average power in the circuit over one cycle of a.c. is

Solution:

The average power in the circuit over one

cycle of a.c. is given by

QUESTION: 25

Power dissipated in an LCR series circuit connected to an a.c source of emf εε is [2009]

Solution:

Power dissipated in series LCR;

is called the impedance of the circuit.

QUESTION: 26

In the given circuit the reading of voltmeter V_{1} and V_{2} are 300 volts each. The reading of the voltmeter V_{3} and ammeter A are

respectively [2010]

Solution:

Hence, the reading of the voltmeter V3 is 220 V and the reading of ammeter A is 2.2 A.

QUESTION: 27

A 220 volts input is supplied to a transformer.The output circuit draws a current of 2.0 ampereat 440 volts. If the efficiency of the transformeris 80%, the current drawn by the primarywindings of the transformer is [2010]

Solution:

QUESTION: 28

An ac voltage is applied to a resistance R and aninductor L in series. If R and the inductivereactance are both equal to 3Ω, the phasedifference between the applied voltage and thecurrent in the circuit is [2011]

Solution:

The phase difference φ is given by

QUESTION: 29

In an ac circuit an alternating voltage e = 200 √2 sin 100 t volts is connected to a capacitorof capacity 1μF. The r.m.s. value of the currentin the circuit is [2011]

Solution:

given e=200√2sin100t

ω=100 rad/sec

E_{rms}= 200√2/√2

C=1×10^{−6}

Z=X_{c}=1/ωC=1/100×10^{−6}=10^{4}Ω

I=E_{rms}/Z=(200√2/√2)/10^{4 }=2×10^{−2}A=20mA

QUESTION: 30

The r.m.s. value of potential difference V shown in the figure is [2011M]

Solution:

Voltage is given as V=Vo for 0 ≥ t ≤ T/2

=0 for T/2 ≥ t ≤T

Rms voltage

⟹ Vrms=V_{o}/√2

QUESTION: 31

A coil has resistance 30 ohm and inductive reactance 20 ohm at 50 Hz frequency. If an ac source, of 200 volt, 100 Hz, is connected across the coil, the current in the coil will be [2011M]

Solution:

If ω = 50 × 2π then ωL = 20Ω

If ω' = 100 × 2π then ω'L = 40Ω

Current flowing in the coil is

QUESTION: 32

In an electrical circuit R, L, C and an a.c. voltage source are all connected in series. When L is removed from the circuit, the phase difference between the voltage the current in the circuit is π/3. If instead, C is removed from the circuit, the phase difference is again π/3. The power factor of the circuit is : [2012]

Solution:

when C is remove from the circuit

QUESTION: 33

The current (I) in the inductance is varying with time according to the plot shown in figure. [2012]

Which one of the following is the correct variation of voltage with time in the coil?

Solution:

Here time and di/dt is -ve for next T/2 time so.

QUESTION: 34

The instantaneous values of alternating current and voltages in a circuit are given as

The average power in Watts consumed in the circuit is : [2012M]

Solution:

The average power in the circuit where cos

φ = power factory

< P > = V_{rms} × I_{rms} cos φ

φ = π/3 = phase difference =180/3 = 60

QUESTION: 35

A coil of self-inductance L is connected in serieswith a bulb B and an AC source. Brightness ofthe bulb decreases when

[NEET 2013]

Solution:

By inserting iron rod in the coil,

QUESTION: 36

The primary of a transformer when connected toa dc battery of 10 volt draws a current of 1 mA.The number of turns of the primary andsecondary windings are 50 and 100 respectively.The voltage in the secondary and the currentdrawn by the circuit in the secondary arerespectively [NEET Kar. 2013]

Solution:

A transformer is essentially an AC device.

DC source so no mutual induction between

coils

⇒ E_{2} = 0 and I_{2} = 0

- 28 Year NEET Questions: Alternating Current
Test | 36 questions | 72 min

- 28 Year NEET Questions: Current Electricity- 1
Test | 35 questions | 70 min

- 28 Year NEET Questions: Current Electricity- 2
Test | 30 questions | 60 min

- 28 Year NEET Questions: Hydrogen
Test | 14 questions | 30 min

- 28 Year NEET Questions: Polymer
Test | 25 questions | 50 min