Description

This mock test of Dynamic Programming And Divide-And-Conquer MCQ - 1 for Computer Science Engineering (CSE) helps you for every Computer Science Engineering (CSE) entrance exam.
This contains 20 Multiple Choice Questions for Computer Science Engineering (CSE) Dynamic Programming And Divide-And-Conquer MCQ - 1 (mcq) to study with solutions a complete question bank.
The solved questions answers in this Dynamic Programming And Divide-And-Conquer MCQ - 1 quiz give you a good mix of easy questions and tough questions. Computer Science Engineering (CSE)
students definitely take this Dynamic Programming And Divide-And-Conquer MCQ - 1 exercise for a better result in the exam. You can find other Dynamic Programming And Divide-And-Conquer MCQ - 1 extra questions,
long questions & short questions for Computer Science Engineering (CSE) on EduRev as well by searching above.

QUESTION: 1

Which of the following standard algorithms is not Dynamic Programming based.

Solution:

Prim's Minimum Spanning Tree is a Greedy Algorithm. All other are dynamic programming based.

QUESTION: 2

If a problem can be solved by combining optimal solutions to non-overlapping problems, the strategy is called _____________

Solution:

In divide and conquer, the problem is divided into smaller non-overlapping subproblems and an optimal solution for each of the subproblems is found. The optimal solutions are then combined to get a global optimal solution. For example, mergesort uses divide and conquer strategy.

QUESTION: 3

An algorithm to find the length of the longest monotonically increasing sequence of numbers in an array A[0 :n-1] is given below. Let Li denote the length of the longest monotonically increasing sequence starting at index i in the array.

Initialize L_{n−1}=1

For all i such that 0 ≤ i ≤ n-2

Finally, the length of the longest monotonically increasing sequence is max(L_{0},L_{1},…,L_{n−1}).

Q.

Which of the following statements is TRUE?

Solution:

QUESTION: 4

Kadane algorithm is used to find:

Solution:

Kadane algorithm is used to find the maximum sum subarray in an array. It runs in O(n) time complexity. See details of the algorithm here.

QUESTION: 5

Four matrices M1, M2, M3 and M4 of dimensions pxq, qxr, rxs and sxt respectively can be multiplied is several ways with different number of total scalar multiplications. For example, when multiplied as ((M1 X M2) X (M3 X M4)), the total number of multiplications is pqr + rst + prt. When multiplied as (((M1 X M2) X M3) X M4), the total number of scalar multiplications is pqr + prs + pst. If p = 10, q = 100, r = 20, s = 5 and t = 80, then the number of scalar multiplications needed is

Solution:

It is basically matrix chain multiplication problem. We get minimum number of multiplications using ((M1 X (M2 X M3)) X M4). Total number of multiplications = 100x20x5 (for M2 x M3) + 10x100x5 + 10x5x80 = 19000.

QUESTION: 6

The subset-sum problem is defined as follows. Given a set of n positive integers, S = {a1 ,a2 ,a3 ,…,an} and positive integer W, is there a subset of S whose elements sum to W? A dynamic program for solving this problem uses a 2-dimensional Boolean array X, with n rows and W+1 columns. X[i, j],1 <= i <= n, 0 <= j <= W, is TRUE if and only if there is a subset of {a1 ,a2 ,...,ai} whose elements sum to j. Which of the following is valid for 2 <= i <= n and ai <= j <= W?

Solution:

X[I, j] (2 <= i <= n and ai <= j <= W), is true if any of the following is true 1) Sum of weights excluding ai is equal to j, i.e., if X[i-1, j] is true. 2) Sum of weights including ai is equal to j, i.e., if X[i-1, j-ai] is true so that we get (j – ai) + ai as j

QUESTION: 7

In the above question, which entry of the array X, if TRUE, implies that there is a subset whose elements sum to W?

Solution:

If we get the entry X[n, W] as true then there is a subset of {a1, a2, .. an} that has sum as W.

QUESTION: 8

A sub-sequence of a given sequence is just the given sequence with some elements (possibly none or all) left out. We are given two sequences X[m] and Y[n] of lengths m and n respectively, with indexes of X and Y starting from 0. We wish to find the length of the longest common sub-sequence(LCS) of X[m] and Y[n] as l(m,n), where an incomplete recursive definition for the function l(i,j) to compute the length of The LCS of X[m] and Y[n] is given below:

l(i,j) = 0, if either i=0 or j=0

= expr1, if i,j > 0 and X[i-1] **=** Y[j-1]

= expr2, if i,j > 0 and X[i-1] **!=** Y[j-1]

Solution:

In Longest common subsequence problem, there are two cases for X[0..i] and Y[0..j]

1) The last characters of two strings match.

The length of lcs is length of lcs of X[0..i-1] and Y[0..j-1]

2) The last characters don't match.

The length of lcs is max of following two lcs values

a) LCS of X[0..i-1] and Y[0..j]

b) LCS of X[0..i] and Y[0..j-1]

QUESTION: 9

Consider two strings A = "qpqrr" and B = "pqprqrp". Let x be the length of the longest common subsequence (not necessarily contiguous) between A and B and let y be the number of such longest common subsequences between A and B. Then x + 10y = ___.

Solution:

//The LCS is of length 4. There are 3 LCS of length 4 "qprr", "pqrr" and qpqr A subsequence is a sequence that can be derived from another sequence by selecting zero or more elements from it, without changing the order of the remaining elements. Subsequence need not be contiguous. Since the length of given strings A = “qpqrr” and B = “pqprqrp” are very small, we don’t need to build a 5x7 matrix and solve it using dynamic programming. Rather we can solve it manually just by brute force. We will first check whether there exist a subsequence of length 5 since min_length(A,B) = 5. Since there is no subsequence , we will now check for length 4. “qprr”, “pqrr” and “qpqr” are common in both strings. X = 4 and Y = 3 X + 10Y = 34

QUESTION: 10

Let A1, A2, A3, and A4 be four matrices of dimensions 10 x 5, 5 x 20, 20 x 10, and 10 x 5, respectively. The minimum number of scalar multiplications required to find the product A1A2A3A4 using the basic matrix multiplication method is

Solution:

We have many ways to do matrix chain multiplication because matrix multiplication is associative. In other words, no matter how we parenthesize the product, the result of the matrix chain multiplication obtained will remain the same. Here we have four matrices A1, A2, A3, and A4, we would have: ((A1A2)A3)A4 = ((A1(A2A3))A4) = (A1A2)(A3A4) = A1((A2A3)A4) = A1(A2(A3A4)). However, the order in which we parenthesize the product affects the number of simple arithmetic operations needed to compute the product, or the efficiency. Here, A1 is a 10 × 5 matrix, A2 is a 5 x 20 matrix, and A3 is a 20 x 10 matrix, and A4 is 10 x 5. If we multiply two matrices A and B of order l x m and m x n respectively,then the number of scalar multiplications in the multiplication of A and B will be lxmxn. Then, The number of scalar multiplications required in the following sequence of matrices will be : A1((A2A3)A4) = (5 x 20 x 10) + (5 x 10 x 5) + (10 x 5 x 5) = 1000 + 250 + 250 = 1500. All other parenthesized options will require number of multiplications more than 1500.

QUESTION: 11

Which of the following algorithms is NOT a divide & conquer algorithm by nature?

Solution:

See Divide and Conquer

QUESTION: 12

Consider the following C program

**Q. What does the program compute?**

Solution:

This is an implementation of Euclid’s algorithm to find GCD

QUESTION: 13

Consider the polynomial p(x) = a0 + a1x + a2x^{2} +a3x^{3}, where ai != 0, for all i. The minimum number of multiplications needed to evaluate p on an input x is:

Solution:

Multiplications can be minimized using following order for evaluation of the given expression. p(x) = a0 + x(a1 + x(a2 + a3x))

QUESTION: 14

Maximum Subarray Sum problem is to find the subarray with maximum sum. For example, given an array {12, -13, -5, 25, -20, 30, 10}, the maximum subarray sum is 45. The naive solution for this problem is to calculate sum of all subarrays starting with every element and return the maximum of all. We can solve this using Divide and Conquer, what will be the worst case time complexity using Divide and Conquer.

Solution:

QUESTION: 15

Consider a situation where you don't have function to calculate power (pow() function in C) and you need to calculate x^n where x can be any number and n is a positive integer. What can be the best possible time complexity of your power function?

Solution:

We can calculate power using divide and conquer in O(Logn) time.

QUESTION: 16

Consider the problem of searching an element x in an array 'arr[]' of size n. The problem can be solved in O(Logn) time if. 1) Array is sorted 2) Array is sorted and rotated by k. k is given to you and k <= n 3) Array is sorted and rotated by k. k is NOT given to you and k <= n 4) Array is not sorted

Solution:

QUESTION: 17

The secant method is used to find the root of an equation f(x) = 0. It is started from two distinct estimates x_{a} and x_{b} for the root. It is an iterative procedure involving linear interpolation to a root. The iteration stops if f(x_{b}) is very small and then x_{b} is the solution. The procedure is given below. Observe that there is an expression which is missing and is marked by? Which is the suitable expression that is to be put in place of? So that it follows all steps of the secant method?

Initialize: x_{a}, x_{b}, ε, N // ε = convergence indicator

f_{b} = f(x_{b}) i = 0

while (i < N and |f_{b}| > ε) do

i = i + 1 // update counter

x_{t} = ? // missing expression for

// intermediate value

x_{a} = x_{b} // reset x_{a}

x_{b} = x_{t} // reset x_{b}

f_{b} = f(x_{b}) // function value at new x_{b}

end while

if |f_{b}| > ε

then // loop is terminated with i = N

write “Non-convergence”

else

write “return x_{b}”

end if

Solution:

QUESTION: 18

Suppose you are provided with the following function declaration in the C programming language.

int partition (int a[ ], int n);

The function treats the first element of a[] as a pivot, and rearranges the array so that all elements less than or equal to the pivot is in the left part of the array, and all elements greater than the pivot is in the right part. In addition, it moves the pivot so that the pivot is the last element of the left part. The return value is the number of elements in the left part. The following partially given function in the C programming language is used to find the kth smallest element in an array a[ ] of size n using the partition function. We assume k ≤ n

int kth_smallest (int a[], int n, int k)

{

int left_end = partition (a, n);

if (left_end+1==k)

{

return a [left_end];

}

if (left_end+1 > k)

{

return kth_smallest (____________________);

}

else

{

return kth_smallest (____________________);

}

}

Q.

The missing argument lists are respectively

Solution:

QUESTION: 19

Consider the problem of computing min-max in an unsorted array where min and max are minimum and maximum elements of array. Algorithm A1 can compute min-max in a1 comparisons without divide and conquer. Algorithm A2 can compute min-max in a2 comparisons by scanning the array linearly. What could be the relation between a1 and a2 considering the worst case scenarios?

Solution:

When Divide and Conquer is used to find the minimum-maximum element in an array, Recurrence relation for the number of comparisons is

T(n) = 2T(n/2) + 2 where 2 is for comparing the minimums as well the maximums of the left and right subarrays

On solving, T(n) = 1.5n - 2.

While doing linear scan, it would take 2*(n-1) comparisons in the worst case to find both minimum as well maximum in one pass.

QUESTION: 20

Consider the C program below.

#include <stdio.h>

int *A, stkTop;

int stkFunc (int opcode, int val)

{

static int size=0, stkTop=0;

switch (opcode)

{

case -1:

size = val;

break;

case 0:

if (stkTop < size ) A[stkTop++]=val;

break;

default:

if (stkTop) return A[--stkTop];

}

return -1;

}

int main()

{

int B[20];

A=B;

stkTop = -1;

stkFunc (-1, 10);

stkFunc (0, 5);

stkFunc (0, 10);

printf ("%d\n", stkFunc(1, 0)+ stkFunc(1, 0));

}

The value printed by the above program is ___________

Solution:

The code in main, basically initializes a stack of size 10, then pushes 5, then pushes 10.

Finally the printf statement prints sum of two pop operations which is 10 + 5 = 15.

stkFunc (-1, 10); // Initialize size as 10 stkFunc (0, 5); // push 5

stkFunc (0, 10); // push 10

// print sum of two pop

printf ("%d\n", stkFunc(1, 0) + stkFunc(1, 0));

### Dynamic Programming - 1

Doc | 40 Pages

### Dynamic Programming

Video | 52:19 min

### Notes - Dynamic Programming

Doc | 3 Pages

### Algorithms - Dynamic Programming

Doc | 4 Pages

- Dynamic Programming And Divide-And-Conquer MCQ - 1
Test | 20 questions | 60 min

- Dynamic Programming, P & NP Concept ( Advance Level) - 1
Test | 5 questions | 15 min

- Dynamic Programming, P & NP Concepts (Basic Level)
Test | 10 questions | 30 min

- Dynamic Programming, P & NP Concepts (Basic Level) - 2
Test | 10 questions | 30 min

- Test: Timer Programming
Test | 10 questions | 10 min