Description

This mock test of Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz for GATE helps you for every GATE entrance exam.
This contains 65 Multiple Choice Questions for GATE Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz (mcq) to study with solutions a complete question bank.
The solved questions answers in this Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz quiz give you a good mix of easy questions and tough questions. GATE
students definitely take this Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz exercise for a better result in the exam. You can find other Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz extra questions,
long questions & short questions for GATE on EduRev as well by searching above.

QUESTION: 1

The clock frequency of an 8085 micro processor in 5MHz. If the time required to execute particular instruction is 1.2μs, then the number of 'T" states needed for executing that instruction is

Solution:

QUESTION: 2

Consider a single input single output discrete-time system with x[n] as input and y[n] as output, where the two are related as

**Q. Which one of the following statements is true about the system?**

Solution:

For an input-output relation if the present output depends on present and past input values then the given system is “Causal”.

For the given relation,

For n ranging from 0 to 10 present output depends on present input only.

At all other points present output depends on present and past input values.

Thus the system is “Causal”.

**Stability**

If x[n] is bounded for the given finite range of n i.e. 0__<__n__<__10 y[n] is also bounded.

Similarly x [n] - x [n- 1] is also bounded at all other values of n

Thus the system is “stable”.

QUESTION: 3

Consider the following statement about the linear dependence of the real valued functions y_{1} = 1, y_{2} = x and y_{3 }= x^{2}, over the field of real numbers.

I. y_{1}, y_{2} and y_{3} are linearly independent on - 1 __<__ x __<__ 0

II. y_{1} , y_{2} and y_{3} are linearly dependent on 0 __<__ x __<__ 1

III. y_{1}, y_{2} and y_{3} are linearly independent on 0 __<__ x __<__ 1

IV. y_{1,} y_{2} and y_{3} are linearly dependent on - 1 __<__ x __<__ 0

**Q. Which one among the following is correct?**

Solution:

y_{1} = 1, y_{2} = x, y_{3} = x^{2}

QUESTION: 4

Consider the 5 × 5 matrix

It is given that A has only one real eigen value. Then the real eigen value of A is

Solution:

*Answer can only contain numeric values

QUESTION: 5

The voltage of an electromagnetic wave propagating in a coaxial cable with uniform characteristic impedance is volts, Where l is the distance along the length of the cable in meters. is the complex propagation constant, and 9

rad s is the angular frequency. The absolute value of the attenuation in the cable in dB/meter is __________.

Solution:

QUESTION: 6

A bar of Gallium Arsenide (GaAs) is doped with Silicon such that the Silicon atoms occupy Gallium and Arsenic sites in the GaAs crystal. Which one of the following statement is true?

Solution:

Silicon atoms act as P- type dopants in Arsenic sites and n- type dopants in Gallium sites.

QUESTION: 7

The rank of the matrix

Solution:

QUESTION: 8

For a narrow base PNP BJT, the excess minority carrier concentration (Δn_{E} for emitter, Δp_{B} for base.Δn_{C} for collector) normalized to equilibrium minority carrier concentration ( n_{E}_{0}for emitter, p_{B0} for base, n_{C0}for collector) in the quasi-neutral emitter, base and collector regions are shown below. Which one of the following biasing modes is the transistor operating in?

Solution:

As per the change carrier profile, base – to – emitter junction is reverse bias and base to collector junction is forward bias, so it works in Inverse active.

*Answer can only contain numeric values

QUESTION: 9

Consider the D-Latch shown in the figure, which is transparent when its clock input CK is high and has zero propagation delay. In the figure, the clock signal CLK1 has a 50% duty cycle and CLK2 is a one-fifth period delayed version of CLK1. The duty cycle at the output latch in percentage is ___________.

Solution:

QUESTION: 10

The Miller effect in the context of a Common Emitter amplifier explains

Solution:

Miller effect increase input capacitance, so that there will be decrease in gain in the high frequency cutoff frequency.

QUESTION: 11

Which of the following can be pole-zero configuration of a phase-lag controller (lag compensator)?

Solution:

In phase lag compensator pole is near to jw- axis,

QUESTION: 12

In the latch circuit shown, the NAND gates have non-zero, but unequal propagation delays. The present input condition is: P = Q = ‘0’. If the input condition is changed simultaneously to P = Q = ‘1’, the outputs X and Y are

Solution:

Unequal propagation delay

*Answer can only contain numeric values

QUESTION: 13

Three fair cubical dice are thrown simultaneously. The probability that all three dice have the same number of dots on the faces showing up is (up to third decimal place) __________.

Solution:

QUESTION: 14

A periodic signal x(t) has a trigonometric Fourier series expansion

Solution:

If x (t) = -x (-t) the given periodic signal is odd symmetric. For an odd symmetric signal

n_{a} = 0 for all n.

where T_{0} is fundamental period then the given

condition satisfies half-wave symmetry.

For half-wave symmetrical signal all coefficients a_{n} and b_{n} are zero for even value of n.

*Answer can only contain numeric values

QUESTION: 15

The open loop transfer function G(s )

Where p is an integer, is connected in unity feedback configuration as shown in figure.

Given that the steady state error is zero for unit step input and is 6 for unit ramp input, the value of the parameter p is _________.

Solution:

QUESTION: 16

An n^{+}- n Silicon device is fabricated with uniform and non-degenerate donor doping concentrations of and corresponding to the n^{+} and n regions respectively. At the operational temperature T, assume complete impurity ionization, kT/q = 25 mV, and intrinsic carrier concentration to be What is the magnitude of the built-in potential of this device?

Solution:

QUESTION: 17

For the operational amplifier circuit shown, the output saturation voltages are ±15V. The upper and lower threshold voltages for the circuit are, respectively.

Solution:

*Answer can only contain numeric values

QUESTION: 18

In the circuit shown, the positive angular frequency w (in radians per second) at which magnitude of the phase difference between the voltages V1 and V2 equals radians, is __________.

Solution:

QUESTION: 19

In a digital communication system, the overall pulse shape p(t) at the receiver before the sampler has the Fourier transform P(f). If the symbols are transmitted at the rate of 2000 symbols per second, for which of the following cases is inter symbol interference zero?

Solution:

For ISI free pulse,

If P(t) is having spectrum P(f)

Thin condition is met by pulse given in option B.

QUESTION: 20

Consider a stable system with transfer function

Where b_{1}, - - - b_{p} and a_{1}, - - - a_{q} are real valued constants. The slope of the Bode log magnitude curve of G(s) converges to -60 dB decade as A possible pair of values for p and q is

Solution:

QUESTION: 21

A good transconductance amplifier should have

Solution:

A good trans conductance amplifier should have high input and output resistance.

*Answer can only contain numeric values

QUESTION: 22

Let (X_{1} , X_{2}) be independent random variables. X_{1} has mean 0 and variance 1, while X_{2} has mean 1 and variance 4. The mutual information I (X_{1}; X_{2}) between X_{1} and X_{2} in bits is _________.

Solution:

For two independent random variable

I(X;Y) = H(X) = H(X/Y)

H(X/Y) = H(X) or independent X and Y

⇒I(X;Y) = 0

QUESTION: 23

Consider the following statements for continuous-time linear time invariant (LTI) systems.

I. There is no bounded input bounded output (BIBO) stable system with a pole in the right half of the complex plane.

II. There is non causal and BIBO stable system with a pole in the right half of the complex plane.

**Q. Which one among the following is correct?**

Solution:

If a system is non-causal then a pole on right half of the s-plane can give BIBO stable system. But for a causal system to be BIBO all poles must lie on left half of the complex plane.

QUESTION: 24

Which one of the following statements about differential pulse code modulation (DPCM) is true?

Solution:

DPCM Block diagram

e_{q} [n] is quantized e [n]

e [n] is difference of message

signal sample with its prediction.

QUESTION: 25

Consider a wireless communication link between a transmitter and a receiver located in free space, with finite and strictly positive capacity. If the effective areas of the transmitter and the receiver antennas, and the distance between them are all doubled, and everything else remains unchanged, the maximum capacity of the wireless link

Solution:

*Answer can only contain numeric values

QUESTION: 26

Starting with x = 1, the solution of the equation x^{3} + x = 1, after two iterations of NewtonRaphson’s method (up to two decimal places) is _________.

Solution:

QUESTION: 27

In binary frequency shift keying (FSK), the given signal waveform are

u_{0} (t) = 5 cos (20000πt);0 __<__ t __<__ T, and

u_{1} (t) = 5 cos (22000πt);0 __<__ t __<__ T,

Where T is the bit-duration interval and t is in seconds. Both u_{0} (t) and u_{1} (t) are zero outside the interval 0 __<__ t __<__ T. With a matched filter (correlator) based receiver, the smallest positive value of T (in milliseconds) required to have u_{0} (t ) and u_{1} (t) uncorrelated is

Solution:

u_{0} (t) = 5 cos (2000πt)

f_{0} = 10 kHz

f_{1 }= 11 kHz

For u_{0} (t) and u_{1} (t) o be orthogonal, it is necessary that

*Answer can only contain numeric values

QUESTION: 28

For the DC analysis of the Common-Emitter amplifier shown, neglect the base current and assume that the emitter and collector current are equal. Given that V_{T} = 25mV, V_{BE} = 0.7V, and the BJT output resistance r0 is practically infinite. Under these conditions, the midband voltage gain magnitude. _________.

Solution:

*Answer can only contain numeric values

QUESTION: 29

The figure shows an RLC circuit exited by the sinusoidal voltage 100 cos ( 3t ) volts, where t is in seconds. The ratio _________.

Solution:

QUESTION: 30

Which one of the following is the general solution of the first order differential equation where x, y are real?

Solution:

QUESTION: 31

A linear time invariant (LTI) system with the transfer function

is connected in unity feedback configuration as shown in the figure.

For the closed loop system shown, the root locus for 0 <K < ∞ intersects the imaginary axis for K = 1.5. The closed loop system is stable for

Solution:

*Answer can only contain numeric values

QUESTION: 32

where x, y, z are real, and let C be the straight line segment from point A : (0, 2,1) to point B : (4,1, -1) . The value of I is _________.

Solution:

The straight line joining A(0, 2, 1) and B(4, 1, -1) is

*Answer can only contain numeric values

QUESTION: 33

As shown, two Silicon (Si) abrupt p-n junction diodes are fabricated with uniform donor doping concentration of N_{D1} = 10^{14} cm^{-3} and N_{D2} = 10^{16} cm^{-3} in the n-regions of the diodes, and uniform acceptor doping concentration of N_{A1} = 10^{14} cm^{-3} and N_{A2 }= 10^{16} cm^{-3} in the pregions of the diodes, respectively. Assuming that the reverse bias voltage is >> built-in potentials of the diodes, the ratio C2/C1 of their reverse bias capacitances for the same applied reverse bias, is __________.

Solution:

*Answer can only contain numeric values

QUESTION: 34

An optical fiber is kept along the zˆ direction. The refractive indices for the electric fields along xˆ and yˆ directions in the fiber are n_{x} = 1.5000 and n_{y} = 1.5001, respectively (n_{x} ny due to the imperfection in the fiber cross-section). The free space wavelength of a light wave propagating in the fiber is 1.5μm. If the light wave is circularly polarized at the input of the fiber, the minimum propagation distance after which it becomes linearly polarized, in centimeter, is ___________.

Solution:

For circular polarization the phase difference between E_{x} & Ey is π/ 2

⇒ The phase difference for linear polarization should be π

So the wave must travel a minimum distance such that the extra phase difference of π/ 2 must occur.

*Answer can only contain numeric values

QUESTION: 35

Two discrete-time signals x[n] and h[n] are both non-zero for n = 0, 1, 2 and are zero otherwise. It is given that

x [0] = 1, x [1] = 2, x [2] = 1, h [0] = 1.

Let y[n] be the linear convolution of x[n] and h[n]. Given that y[1] = 3 and y[2] = 4, the value of the expression (10y[3] + y[4]) is _________.

Solution:

Similarly 2a + b + 1 = 4 Þ b = 3 - 2 (1) = 1

b =1

y [3] = 2(1) + 1 = 3

y[4] = b= 1

10y [3] + y[4] = 30 + 1 = 31

QUESTION: 36

Which one of the following options correctly describes the locations of the roots of the equation s^{4 }+ s^{2 }+ 1 = 0 on the complex plane?

Solution:

F (s) = s^{4} + s^{2 }+ 1 = 0

Let take s^{2} =t

Hence two roots contain RHS and two roots contain LHS plane.

*Answer can only contain numeric values

QUESTION: 37

The dependence of drift velocity of electrons on electric field in a semiconductor is shown below. The semiconductor has a uniform electron concentration of and electronic charge If a bias of 5V is applied across a 1 μm region of this semiconductor, the resulting current density in this region, in kA/cm^{2}, is _________.

Solution:

*Answer can only contain numeric values

QUESTION: 38

For the circuit shown, assume that the NMOS transistor is in saturation. Its threshold voltage

tn V_{tm} = 1V and its transconductance parameter . Neglect channel length

modulation and body bias effects. Under these conditions, the drain current ID in mA is ___________.

Solution:

QUESTION: 39

Let X(t) be a wide sense stationary random process with the power spectral density S_{X}(f) as shown in Figure (a), where f is in Hertz (Hz). The random process X(t) is input to an ideal low pass filter with frequency response

Let E be the expectation operator and consider the following statements.

I. E (X (t)) = E (Y(t))

II. E(X^{2} (t)) = E(Y^{2}(t))

III. E(Y^{2} (t)) = 2

Solution:

*Answer can only contain numeric values

QUESTION: 40

As shown a uniformly doped Silicon (Si) bar of length L = 0.1 mm with a donor concentration N_{D} = 10^{16} cm^{-3 }is illuminated at x = 0 such that electron and hole pairs are generated at the rate of where Hole lifetime is 10^{-4} s, electronic charge hole diffusion coefficient and low level injection condition prevails. Assuming a linearly decaying steady state excess hole concentration that goes to 0 at x = L, the magnitude of the diffusion current density at x = L/2, in A/cm^{2}, is _________.

Solution:

QUESTION: 41

The Nyquist plot of the transfer function does not encircle the point (1 + j0 ) for K = 10 but does encircle the point ( -1+ j0 ) for K = 100. Then the closed loop system (having unity gain feedback) is

Solution:

So If k = 10 touching point= 0.5

If k = 100 touching point= 5

N = P- Z, Here P =0

N =-Z

If closed loop system to be stable, then Z = 0, Þ N = 0,

So, k = 10 is stable system

*Answer can only contain numeric values

QUESTION: 42

In the figure shown, the npn transistor acts as a switch

For the input V_{in} (t) as shown in the figure, the transistor switches between the cut-off and saturation regions of operation, when T is large. Assume collector-to-emitter voltage saturation V_{CE(sat) }= 0.2V and base-to-emitter voltage V_{BE }= 0.7V. The minimum value of the common-base current gain (α) of the transistor for the switching should be _________.

Solution:

*Answer can only contain numeric values

QUESTION: 43

A three dimensional region R of finite volume is described by x^{2} + y^{2} __<__ z^{3} ; 0 __<__ z __<__ 1, Where x, y, z are real. The volume of R (up to two decimal places) is ___________.

Solution:

QUESTION: 44

The expression for an electric field in free space is where x, y, z represent the spatial coordinates, t represents time, and w,k are constants. This electric field

Solution:

QUESTION: 45

A finite state machine (FSM) is implemented using the D flip-flops A and B, and logic gates, as shown in the figure below. The four possible states of the FSM are Q_{A}Q_{B} = 00, 01,10 and 11.

Assume that X_{1N} is held at a constant logic level throughout the operation of the FSM. When the FSM is initialized to the state Q_{A} Q_{B} = 00 and clocked, after a few clock cycles, it starts cycling through

Solution:

In given diagram

QUESTION: 46

Let x(t) be a continuous time periodic signal with fundamental period T = 1 seconds. Let {a_{k}} be the complex Fourier series coefficients of x(t), where k is integer valued. Consider the following statements about x(3t):

I. The complex Fourier series coefficients of x(3t) are {a_{k}} where k is integer valued

II. The complex Fourier series coefficients of x(3t) are {3a_{k}} where k is integer valued

III. The fundamental angular frequency of x(3t) is 6 π rad/s

For the three statements above, which one of the following is correct?

Solution:

Fourier series coefficient a_{k} is unaffected by scaling operating. Thus (I) is true and (II) is false.

T = 1sec for x(t) and if it compressed by ‘3’ then the resultant period T = 1/3

*Answer can only contain numeric values

QUESTION: 47

A 4-bit shift register circuit configured for right-shift operation, i.e, D_{in} → A, A → B, B →C, C → D, is shown. If the present state of the shift register is ABCD = 1101, the number of clock cycles required to reach the state ABCD = 1111 is _________.

Solution:

QUESTION: 48

for real x. From among the following, choose the Taylor series approximation of f(x) around x = 0, which included all powers of x less than or equal to 3.

Solution:

QUESTION: 49

The following FIVE instructions were executed on an 8085 microprocessor.

MVI A, 33H

MVI B, 78H

ADD B

CMA

ANI 32H

The Accumulator value immediately after the execution of the fifth instruction is

Solution:

*Answer can only contain numeric values

QUESTION: 50

In the circuit shown, the voltage V1N (t ) is described by:

Where t is in seconds. The time (in seconds) at which the current I in the circuit will reach the value 2 Amperes is ___________.

Solution:

Under dc condition inductor acts as short all

QUESTION: 51

A half wavelength dipole is kept in the x-y plane and oriented along 45^{°} from the x-axis. Determine the direction of null in the radiation pattern for . Here the angle θ(0__<__θ<π) is measured from the z-axis, and the angle is measured from the x-axis in the x-y plane.

Solution:

The null occurs along axis of the antenna which is

*Answer can only contain numeric values

QUESTION: 52

The amplifier circuit shown in the figure is implemented using a compensated operational amplifier (op-amp), and has an open-loop voltage gain, A_{0} = 10^{5} V/V and an open-loop cut-off frequency f_{c} = 8Hz. The voltage gain of the amplifier at 15 kHz, in V/V is __________.

Solution:

Given Amplifier is using –ve feed back

*Answer can only contain numeric values

QUESTION: 53

Let h[n] be the impulse response of a discrete-time linear time invariant (LTI) filter. The impulse response is given by

Let H () be the discrete-time Fourier system transform (DTFT) of h[n], where is the normalized angular frequency in radians. Given that H (_{0})=0 and 0 < _{0} < π, the value of

0 (in radians) is equal to __________.

Solution:

It is given that,

QUESTION: 54

Which one of the following gives the simplified sum of products expression for the Boolean function F = m_{0} + m_{2} + m_{3} + m_{5} , where m_{0} , m_{2} , m_{3} and m_{5} are minterms corresponding to the inputs A, B and C with A as the MSB and C as the LSB?

Solution:

F = M_{o} + M_{2} + M_{3} + M_{5} → minterm

*Answer can only contain numeric values

QUESTION: 55

A continuous time signal x (t) = 4 cos (200πt) + 8 cos (400πt) , where t is in seconds, is the input to a linear time invariant (LTI) filter with the impulse response

Solution:

QUESTION: 56

She has a sharp tongue and it can occasionally turn _______.

Solution:

QUESTION: 57

Some table are shelves. Some shelves are chairs. All chairs are benches. Which of the following conclusion can be deduced from the preceding sentences?

(i) At least one bench is a table

(ii) At least one shelf is a bench

(iii) At least one chair is a table

(iv) All benches are chairs

Solution:

QUESTION: 58

40% of deaths on city roads may be attributed to drunken driving. The number of degree needed to represent this as a slice of a pie chart is

Solution:

Given 40% of deaths on city roads are drunken driving

QUESTION: 59

In the summer, water consumption is known to decrease overall by 25%. A water Board official states that in the summer household consumption decreases by 20%, while other consumption increases by 70%.

**Q. Which of the following statement is correct?**

Solution:

Let H is house hold consumption and P is the other consumption.

Given

QUESTION: 60

I ________ made arrangements had I _________informed earlier.

Solution:

QUESTION: 61

“If you are looking for a history of India, or for an account of the rise and fall of the British Raj, or for the reason of the cleaving of the subcontinent into two mutually antagonistic parts and the effects this mutilation will have in the respective section, and ultimately on Asia, you will not find it in these pages; for though I have spent a lifetime in the country. I lived too near the seat of events, and was too intimately associated with the actors, to get the perspective needed for the impartial recording of these matters”.Here, the word ‘antagonistic’ is closest in meaning to

Solution:

QUESTION: 62

There are 3 Indians and 3 Chinese in a group of 6 people. How many subgroups of this group can we choose so that every subgroup has at least one Indian?

Solution:

No. of sub groups such that every sub group has at least one Indian

Alternate method

Sub groups containing only Indians =

QUESTION: 63

A contour line joints locations having the same height above the mean sea level. The following is a contour plot of a geographical region. Contour lines are shown at 25 m intervals in this plot.

The path from P to Q is best described by

Solution:

Down- up-Down

QUESTION: 64

Trucks (10m long) and cars (5 m long) go on a single lane bridge. There must be a gap of atleast 20 m after each truck and a gap of atleast 15m after each car. Trucks and cars travel at a speed of 36 km/h. If cars and trucks go alternatively, what is the maximum number of vehicles that can use the bridge in one hour?

Solution:

Given speeds both car & Truck = 36 km/hour

They travel in 1 hr = 36 km = 36000 m.

Alternate method

Length of truck + gap required = 10+20 = 30m

Length of car + gap required = 5+15 = 20m

Alternative pairs of Truck and car needs 30+ 20 = 50 m.

Let 'n' be the number of repetition of (Truck + car) in 1 hour (3600 sec).

Given speed 36 km/ hr 10m/ sec

QUESTION: 65

S, T, U, V, W, X, Y and Z are seated around a circular table. T‟s neighbours are Y and V. Z is seated third to the left of T and second to the right of S.U‟s neighbours are S and Y; and T and W are not seated opposite each other. Who is third to the left of V?

Solution:

Following circular seating arrangement can be drawn.

Only one such arrangement can be drawn.

The person on third to the left of V is X.

- Electronics And Communication - ECE 2017 GATE Paper MCQ Quiz
Test | 65 questions | 180 min

- Electronics And Communication - ECE 2012 GATE Paper (Practice Test)
Test | 65 questions | 180 min

- Electronics And Communication - ECE 2013 GATE Paper (Practice Test)
Test | 65 questions | 180 min

- Electronics And Communication Engineering - (EC) 2018 GATE Paper (Practice Test)
Test | 65 questions | 180 min

- Sample GATE Mock Test - Electronics & Communication (EC)
Test | 65 questions | 180 min