To prevent signal alternation, what is the max number of repeaters that can be placed on one 10 Base 5 or 10.Base 2 network?
Maximum 4 repeaters can be placed in one transmission path between two nodes while 5 between two nodes.
Which IP class provides the fewest numbers of hosts?
Number of host in class A = 224 - 2 Number of host in class B = 216 - 2 Number of host in class C = 28 - 2 Number of host in class D = 0
A repeater takes a weak and or corrupted signal and _____ it.
A repeater takes a weak or corrupted signal and regenerate it
A subnet mask in class A can have ______ 1’s with the remaining bits 0’s.
Default subnet mask of class A network 11111111-00000000-00000000-00000000
To interconnect two IP classes, class A and class C networks
Router is used to connect two different class networks.
Given an IP address 184.108.40.206 with a subnet mask of 7 bits. How many hosts and subnets are possible.
Class_______has the greatest number of hosts per given network address.
Number of hosts in class A = 224 - 2 Number of hosts in class B = 216 - 2 Number of hosts in class C = 28 - 2
The effective bandwidth is based on ______ .
The effective data burst is a measure of average data rate, peak data rate and maximum data rate.
Identify the unequal pair(s):
Physical address is also known as MAC address. Logical address is also known as IP address COM1 is a communication port.
There are three IP addresses as given below:
X = 220.127.116.11
Y = 18.104.22.168
Z = 22.214.171.124
Which of the following statements is/are correct?
In IP add re sse s class A, B, and C used for general purpose.
The default subnet mask for a Class B network can be
If IP address is AND with subnet mask result will network address.
Default subnet mask:
Class A = 255.0.0.0
Class B = 255.255.0.0
Class C = 255.255.255.0
Match List-I (Function) with List-11 (Layer) and select the correct answer using the codes given below the lists:
Packet switching→ network iayer.
Route determination→ 4 network layer.
Flow control → datalink and transport layer.
Match List-I (Function) with List-lI (Layer) and select the correct answer using the codes given below the lists
A. Reassembly of packets
B. Responsibility for delivery between adjacent nodes
C. Mechanical electrical and functional interface
D. Error correction and retransmission
2. Data link
A subnet mask in class A has fourteen 1’s. How many subnet does it define?
6 bit are used for subnetting.
So number of possible subnets - 26 = 64.
In a class A subnet, we know the IP address of one of the hosts and the mask as given below:
IP address = 126.96.36.199
Mask = 255.255.0.0
What is the first address (network address)?