Mock Test: SSC JE (ME)- 3

# Mock Test: SSC JE (ME)- 3

Test Description

## 100 Questions MCQ Test Mechanical Engineering SSC JE (Technical) | Mock Test: SSC JE (ME)- 3

Mock Test: SSC JE (ME)- 3 for Mechanical Engineering 2022 is part of Mechanical Engineering SSC JE (Technical) preparation. The Mock Test: SSC JE (ME)- 3 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The Mock Test: SSC JE (ME)- 3 MCQs are made for Mechanical Engineering 2022 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Mock Test: SSC JE (ME)- 3 below.
Solutions of Mock Test: SSC JE (ME)- 3 questions in English are available as part of our Mechanical Engineering SSC JE (Technical) for Mechanical Engineering & Mock Test: SSC JE (ME)- 3 solutions in Hindi for Mechanical Engineering SSC JE (Technical) course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt Mock Test: SSC JE (ME)- 3 | 100 questions in 100 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study Mechanical Engineering SSC JE (Technical) for Mechanical Engineering Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Mock Test: SSC JE (ME)- 3 - Question 1

### An Ideal gas at 27ºC is heated at constant pressure till the volume becomes three times. The temperature of the gas will then be

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 1

Mock Test: SSC JE (ME)- 3 - Question 2

### If the time taken by a system to execute a process through a finite gradient is infinitely large,the process

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 2

Mock Test: SSC JE (ME)- 3 - Question 3

### Gas contained in a closed system consisting of piston cylinder arrangement is expand. Workdone by the gas during expansion is 50 kJ. Decreases in internal energy of the gas duringexpansion is 30 kJ. Heat transfer during the process is equal to

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 3

Mock Test: SSC JE (ME)- 3 - Question 4

Direction: Each of the next consists of two statements, one labeled as the 'Assertion (A)' and
the other as 'Reason (R)'. You are to examine these two statements carefully and select the answers to these items using the codes given below:
Codes:
(a) Both A and R are individually true and R is the correct explanation of A.
(b) Both A and R are individually true but R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true

Assertion (A): The changes in heat and work cannot be expressed as difference between the
end states.
Reason (R) : Heat and work both are exact differentials.

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 4

Mock Test: SSC JE (ME)- 3 - Question 5

For a given value of TH (Source temperature) for a reversed Carnot cycle, the variation of TL(Sink temperature) for different values of COP is represented by which one of the following graphs ?

Mock Test: SSC JE (ME)- 3 - Question 6

Efficiency of a Carnot engine is 75%. If the cycle direction is reversed, COP of the reversed Carnot cycle is

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 6

Mock Test: SSC JE (ME)- 3 - Question 7

Gibb's free energy 'G' is defined as

Mock Test: SSC JE (ME)- 3 - Question 8

The state of a substance whose evaporation from its liquid state is complete, is known as

Mock Test: SSC JE (ME)- 3 - Question 9

The ratio of specific heat at constant pressure (cp) and specific heat at constant volume (c,) is

Mock Test: SSC JE (ME)- 3 - Question 10

A process, in which the temperature of the working substance remains constant during itsexpansion or compression, is called

Mock Test: SSC JE (ME)- 3 - Question 11

Carnot cycle consists of

Mock Test: SSC JE (ME)- 3 - Question 12

The absolute zero pressure will be

Mock Test: SSC JE (ME)- 3 - Question 13

A condenser of a refrigeration system rejects heat at rate of 120 kW, while its compressorconsumes a power of 30 kW. The coefficient of performance of the system would be

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 13

Mock Test: SSC JE (ME)- 3 - Question 14

Consider the following statements: Moisture should be removed from refrigerants
to avoid
1. Compressor seal failure
2. Freezing at the expansion valve.
3. Restriction to refrigerant flow.
4. Corrosion of steel parts.
Which of these statements are correct?

Mock Test: SSC JE (ME)- 3 - Question 15

Match List-I (Process) with List-II (Type)for Bell Coleman or Joule or Reverse Brayton cycle
for gas cycle refrigeration and select the correct answer using the codes given below the lists:

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 15

Mock Test: SSC JE (ME)- 3 - Question 16

The power per tonne of refrigeration is

Mock Test: SSC JE (ME)- 3 - Question 17

Which of the following represents a heat pump ?

Mock Test: SSC JE (ME)- 3 - Question 18

In a petrol engine car, which one of the following performance characteristic is affected by thefront-end volatility gasoline used ?

Mock Test: SSC JE (ME)- 3 - Question 19

Match List-I (Gas cycles) with List-II (Thermodynamic coordinates) and select correct
answer using the codes given below the lists:

Mock Test: SSC JE (ME)- 3 - Question 20

Direction: Each of the next consists of two statements, one labeled as the 'Assertion (A)' and
the other as 'Reason (R)'. You are to examine these two statements carefully and select the answers to these items using the codes given below:
Codes:
(a) Both A and R are individually true and R is the correct explanation of A.
(b) Both A and R are individually true but R is not the correct explanation of A
(c) A is true but R is false
(d) A is false but R is true

Statement (I) : Specific output of a SI engine is higher than the CI engine
Statement (II): Its higher engine mixture result in ability to burn richer mixture result in increased
energy conversion rate.

Mock Test: SSC JE (ME)- 3 - Question 21

An ideal spark ignition engine has a compression ratio of 9. What is its Air standard efficiency ifratio of specific heats is 1.5 ?

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 21

Mock Test: SSC JE (ME)- 3 - Question 22

For minimizing knocking tendency in SI engine, where should the spark plug be located ?

Mock Test: SSC JE (ME)- 3 - Question 23

Which of the following fuel has little tendency towards detonation ?

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 23

Mock Test: SSC JE (ME)- 3 - Question 24

Stoichiometric ratio is

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 24

Stoichiometric ratio is Chemically correct air-fuel ratio by volume.

Mock Test: SSC JE (ME)- 3 - Question 25

Which of the following form part (s) of boiler mountings ?
1. Economiser
2. Feed check valve
3. Steam trap
4. Superheater

Select the correct answer using the codes given below:

Mock Test: SSC JE (ME)- 3 - Question 26

Which one of the following statement is not correct ?In a fluidized-bead boiler

Mock Test: SSC JE (ME)- 3 - Question 27

In a boiler, the air preheater in invariably located between:

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 27

Air preheater is invariably located between forced draft fan and furnace to preheat the combustion air.

Mock Test: SSC JE (ME)- 3 - Question 28

Out of the following impurities generally found in water, which one requires special considerationin case of very high pressure boilers?

Mock Test: SSC JE (ME)- 3 - Question 29

The function of economizer in a boiler is to

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 29

Mock Test: SSC JE (ME)- 3 - Question 30

When a hydrocarbon fuel burns in deficit air, Orsat analyzer will show the presence offollowing gases in the engine exhaust

Mock Test: SSC JE (ME)- 3 - Question 31

Once-through boilers will not have

Mock Test: SSC JE (ME)- 3 - Question 32

The forced circulation of water does not take place in

Mock Test: SSC JE (ME)- 3 - Question 33

Which of the following are boiler accessories ?

Mock Test: SSC JE (ME)- 3 - Question 34

The pressure of feed water has to be raised  fore its entry into the boiler. The pressure israised by a device known as

Mock Test: SSC JE (ME)- 3 - Question 35

In the phenomenon of cavitation, the characteristic fluid property involved is

Mock Test: SSC JE (ME)- 3 - Question 36

What is the unit of dynamic viscosity of a fluid termed "poise" equivalent to ?

Mock Test: SSC JE (ME)- 3 - Question 37

The vapour pressure is the characteristic fluid property involved in the phenomenon of

Mock Test: SSC JE (ME)- 3 - Question 38

In a pipe-flow, pressure is to be measured at a particular cross- section using the most appropriate instrument. Match List-I (Expected pressure range) with List-II (Appropriate measuring device) and select the correct answer using the codes given below the lists:

Mock Test: SSC JE (ME)- 3 - Question 39

The centre of pressure for an inclined surface area

Mock Test: SSC JE (ME)- 3 - Question 40

The frictional head loss in a turbulent flow through a pipe varies

Mock Test: SSC JE (ME)- 3 - Question 41

The friction factor for fully developed turbulent flow through a rough circular pipe depends on

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 41

Mock Test: SSC JE (ME)- 3 - Question 42

The variation in the volume of a liquid with the variation of pressure is called its

Mock Test: SSC JE (ME)- 3 - Question 43

The atmospheric pressure at sea level is

Mock Test: SSC JE (ME)- 3 - Question 44

The centre of gravity of the volume of the liquid displaced is called

Mock Test: SSC JE (ME)- 3 - Question 45

The discharge over a rectangular notch is

where b = width of notch

h = Height of liquid above the sill of notch

Mock Test: SSC JE (ME)- 3 - Question 46

The unit speed of the turbine runner is

Mock Test: SSC JE (ME)- 3 - Question 47

The cavitation in a hydraulic machine

Mock Test: SSC JE (ME)- 3 - Question 48

Fig. shows the three coplanar force P.Q and R acting at a point O. If these forces are in
equilibrium , then

Mock Test: SSC JE (ME)- 3 - Question 49

Moment of inertia is the

Mock Test: SSC JE (ME)- 3 - Question 50

The friction experienced by a body, when at rest, is known as

Mock Test: SSC JE (ME)- 3 - Question 51

Which of the following are vector quantities ?

Mock Test: SSC JE (ME)- 3 - Question 52

The volumetric strain in case of a thin cylindrical shell of diameter 'd', thickness 't', subjected to
internal pressure 'P' is

Mock Test: SSC JE (ME)- 3 - Question 53

The Poisson ratio of a material which has Young's modulus of 120 GPa and shear modulus of 50GPa, is

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 53

Mock Test: SSC JE (ME)- 3 - Question 54

What is the relationship between elastic constants E, G and K?

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 54

Mock Test: SSC JE (ME)- 3 - Question 55

Normal stresses of equal magnitude s, but of opposite signs, act at a point of a strained materialin perpendicular direction. What is the magnitude of the stress on a plane inclined at 45º to theapplied stresses ?

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 55

Mock Test: SSC JE (ME)- 3 - Question 56

The velocity ratio in case of an inclined plane inclined at angle θ to the horizontal and weight being pulled up the inclined plane by vertical effort is​

Mock Test: SSC JE (ME)- 3 - Question 57

A seamless pipe of diameter d m is to carry fluid under a pressure of P kN/cm2. The necessary
thickness t of metal in cm, if the maximum stress is not to exceedσ kN/cm2 is

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 57

Mock Test: SSC JE (ME)- 3 - Question 58

A slender bar of 100 mm2 cross-section is subjected to loading as shown in the figure below.If the modulus of elasticity is taken as 200 × 109. pa. then the elongation produced in the bar will be

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 58

Mock Test: SSC JE (ME)- 3 - Question 59

Modular ratio of the two materials is the ratio of

Mock Test: SSC JE (ME)- 3 - Question 60

A bar of copper and steel form a composite system, which is heated to a temperature of 40ºC.The stress induced in the copper bar will be

Mock Test: SSC JE (ME)- 3 - Question 61

The lower layer of the beam as shown fig, will be

Mock Test: SSC JE (ME)- 3 - Question 62

The polar modulus for a hollow shaft of outer diameter (D) and inner diameter (d ) is

Mock Test: SSC JE (ME)- 3 - Question 63

The load required to produce a unit deflection in a spring is called

Mock Test: SSC JE (ME)- 3 - Question 64

The centre of gravity of the coupler link in a 4- bar mechanism would experience

Mock Test: SSC JE (ME)- 3 - Question 65

Which one of the following sets of acceleration is involved in the motion of the piston inside thecylinder of a uniformly rotating cylinder mechanism ?

Mock Test: SSC JE (ME)- 3 - Question 66

A man is climbing up a ladder up a ladder which is resting against a vertical wall. When he wasexactly half way up, the ladder started slipping . The path traced by the man is :

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 66

Mock Test: SSC JE (ME)- 3 - Question 67

ABCD is bar mechanism, in which AD is the fixed link, and link BC, is in the form of a circulardisc with centre P. In which one of the following cases P will be the instantaneous centre of the disc?

Mock Test: SSC JE (ME)- 3 - Question 68

In a single slider four-bar linkage when the slider is fixed, it form a mechanism of

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 68

Mock Test: SSC JE (ME)- 3 - Question 69

Which of the following pairs of devices and their functions are correctly matched ?
1. Flywheel : For storing kinetic energy
2. Governors : For controlling speed
3. Lead screw in : For providing feed to the lathe slides
4. Fixtures : For locating work- piece and guiding tools

Select the correct answer using the codes given below:

Mock Test: SSC JE (ME)- 3 - Question 70

Match List-I (Kinematic pairs) with List-II (Practical example) and select the correct answer
using the code given below the lists:

Mock Test: SSC JE (ME)- 3 - Question 71

In a cam drive, it is essential to offset the axis of a follower to

Mock Test: SSC JE (ME)- 3 - Question 72

Which one if the following pairs is correctly matched ?

Mock Test: SSC JE (ME)- 3 - Question 73

The working surface above the pitch surface of the gear tooth is termed as

Mock Test: SSC JE (ME)- 3 - Question 74

Stress concentration in a machine component of ductile materials not so harmful as it is in brittlematerial because

Mock Test: SSC JE (ME)- 3 - Question 75

Consider the following joints:
1. Railway carriage wheel and axle
2. IC engine cylinder and liner
which of the above joints is /are the result (s) of interference fit ?

Detailed Solution for Mock Test: SSC JE (ME)- 3 - Question 75

Explanation : Railway Carriage wheel and axle is an interference fit joint.

Mock Test: SSC JE (ME)- 3 - Question 76

For bolts of uniform strength, the shank diameter is made equal to

Mock Test: SSC JE (ME)- 3 - Question 77

The stress which vary from a minimum value to a maximum value of the same nature (i.e. tensileor compressive) is called

Mock Test: SSC JE (ME)- 3 - Question 78

The value of stress concentration factor depends upon

Mock Test: SSC JE (ME)- 3 - Question 79

The design calculations for members subject to fluctuating loads with the same factor of safety,yield the most conservative estimates when using

Mock Test: SSC JE (ME)- 3 - Question 80

The design of the pressure vessel is based on

Mock Test: SSC JE (ME)- 3 - Question 81

Which one of the following is an advantage of forging ?

Mock Test: SSC JE (ME)- 3 - Question 82

Which of the following statements is correct ?

Mock Test: SSC JE (ME)- 3 - Question 83

Which one of the following is not a fusion welding process

Mock Test: SSC JE (ME)- 3 - Question 84

In an inert welding process, the commonly used gas is

Mock Test: SSC JE (ME)- 3 - Question 85

Solid material chemical bonds are

Mock Test: SSC JE (ME)- 3 - Question 86

Which one of the following sets if constituents is expected in equilibrium cooling of a hypereutectoid steel from austenitic state ?

Mock Test: SSC JE (ME)- 3 - Question 87

Primary object of full annealing is to

Mock Test: SSC JE (ME)- 3 - Question 88

Match List-I (Alloy) with List-II (Use) and select the correct answer using the codes give
below the lists:

Mock Test: SSC JE (ME)- 3 - Question 89

The most important function of the cutting fluid is

Mock Test: SSC JE (ME)- 3 - Question 90

Misrun is casting defect which occurs due to

Mock Test: SSC JE (ME)- 3 - Question 91

Cast iron during machining produces

Mock Test: SSC JE (ME)- 3 - Question 92

The lip angle is the angle

Mock Test: SSC JE (ME)- 3 - Question 93

Crater wear occurs mainly on the

Mock Test: SSC JE (ME)- 3 - Question 94

The cupola is used to manufacture

Mock Test: SSC JE (ME)- 3 - Question 95

The coordination number of a face centered cubic space lattice is

Mock Test: SSC JE (ME)- 3 - Question 96

Which of the following statement is wrong?

Mock Test: SSC JE (ME)- 3 - Question 97

A steel containing ferrite and pearlite is

Mock Test: SSC JE (ME)- 3 - Question 98

Normalising of steel is done to

Mock Test: SSC JE (ME)- 3 - Question 99

Brass is an alloy of

Mock Test: SSC JE (ME)- 3 - Question 100

Babbitt metal contains

## Mechanical Engineering SSC JE (Technical)

6 videos|89 docs|55 tests
 Use Code STAYHOME200 and get INR 200 additional OFF Use Coupon Code
Information about Mock Test: SSC JE (ME)- 3 Page
In this test you can find the Exam questions for Mock Test: SSC JE (ME)- 3 solved & explained in the simplest way possible. Besides giving Questions and answers for Mock Test: SSC JE (ME)- 3, EduRev gives you an ample number of Online tests for practice

## Mechanical Engineering SSC JE (Technical)

6 videos|89 docs|55 tests