Test: Communication System- 4 - Electrical Engineering (EE) MCQ
25 Questions MCQ Test - Test: Communication System- 4
Which of the following are the advantages of FM and AM
1. Better noise immunity is provided
2. Lower bandwidth is required
3. The transmitted power is more useful
4. Less modulating power is required
Select the correct answer using the codes given below:
Why does an FM radio station perform better than an AM station radiating the same total power
| 1 Crore+ students have signed up on EduRev. Have you? Download the App |
Which one of the following is an indirect way of generating FM
Which one of the following is an indirect way of generating FM
In FM, modulation index mf is equal to ( Δ f is the frequency deviation, and fm is the modulating signal frequency)
FM broadcast standards specify a maximum deviation of frequency to be equal to 75 kHz and a maximum modulating frequency of 15 kHz. What is the modulation index for FM wave
The modulation index of an FM signal, having a carrier swing of 100 kHz with modulation signal frequency of 8 kHz is
When the modulating frequency is doubled, the modulation index is halved and the modulating voltage remains constant. The modulation is
In a narrowband FM system, the highest modulating frequency is fm. The bandwidth of the system will be
The bandwidth of a narrow band FM signal generated by a 4 kHz audio signal modulating a 125 MHz carrier is
An FM signal with a modulation index 9 is applied to a frequency tripler. The modulation index in the output signal will be
The ratio W for 100% amplitude modulation with identical total transmitted power (mf is modulation index of FM) is
With the increase in the transmission bandwidth, received signal-power in AM and FM will,respectively
In phase modulation, phase deviation is proportional to
Consider an angle modulated signal x(t) = 6 cos[2 π × 106t + 2 sin (8000 π t) + 4cos (8000 π t)VThe average power of x(t) is
In a BPSK signal detector, the local oscillator has a fixed phase error of 20º. By what factor does this phase error deteriorate the SNR at the output
Which one of the following blocks is not common in both AM and FM receivers
When a radio receiver is tuned to 455 kHz, its local oscillator provides the mixer with an input at 1010 kHz. What is the frequency of the other station
In conventional AM superheterodyne receivers, the detectors employed to extract intelligence include
Double spotting in superheterodyne receivers is caused by
The main advantage of pre-emphasis circuit in FM transmitter is
Top Courses for Electrical Engineering (EE)
Important Questions for Communication System- 4
Communication System- 4 MCQs with Answers
Online Tests for Communication System- 4
|
© EduRev
|
Education Revolution
|
|
