|1 Crore+ students have signed up on EduRev. Have you?|
The materials not included in highway construction are __________
Petrol is not used directly in highway construction, but by-product like bitumen is used. Stone, dust and soil may be used in subgrade and base.
For places where there is a passage of flood water then the highway has to be built on __________
If the HFL is more than the formation level of the road which is going to be provided, then it has to be built on embankment.
The layer which is constructed above embankment is called __________
The embankment is the lowest layer and it is below the sub grade, base is above sub base, sub base is above the sub grade.
The highest CBR number is required for __________
CBR number decreases with an increase in height, the soil requires the highest CBR and the pavement requires the lowest CBR.
What is the most common waste material used in construction?
Fly ash is an industrial waste obtained from the thermal plants, it has been mandatory to use the fly ash in bricks.
Bitumen is a by-product of __________
Bitumen is obtained by burning the petroleum at high temperatures, it is mostly used in the construction of flexible pavements.
Tar is a by-product of __________
It is a natural substance, oozing out of the ground in places like the La Brea tar pits. Usually it is made by heating coal inside a chemical apparatus. Most tar is produced from coal as a byproduct of coke production, but it can also be produced from petroleum, peat or wood.
In the initial stage of construction which type of pavement is cheap?
Flexible pavements are easy to construct and have cheaper cost than C. C pavements and also they are easily accessible to the users.
What type of pavement can aggregate with an aggregate impact value of 26% not be used in?
For the bituminous concrete surface course, the impact value should not exceed 24%, so the sample in the question cannot be used. For cement concrete base course, it must not exceed 45%, bitumen bound macadam base course 35% and for water bound macadam base course 40%.
In a length gauge used for determination of elongation index, what is the length of gauge size for sieve sets 25 mm and 20 mm?
The length of gauge size is obtained by multiplying the average of sieve sets with 1.8. So, for particles passing 25 mm sieve and retained on 20 mm sieve, the length of the gauge size would be
Use Code STAYHOME200 and get INR 200 additional OFF
|Use Coupon Code|