Courses

# Test: Joining Processes - 1

## 10 Questions MCQ Test Topicwise Question Bank for Mechanical Engineering | Test: Joining Processes - 1

Description
This mock test of Test: Joining Processes - 1 for Mechanical Engineering helps you for every Mechanical Engineering entrance exam. This contains 10 Multiple Choice Questions for Mechanical Engineering Test: Joining Processes - 1 (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Joining Processes - 1 quiz give you a good mix of easy questions and tough questions. Mechanical Engineering students definitely take this Test: Joining Processes - 1 exercise for a better result in the exam. You can find other Test: Joining Processes - 1 extra questions, long questions & short questions for Mechanical Engineering on EduRev as well by searching above.
QUESTION: 1

Solution:

QUESTION: 2

Solution:

we have,

QUESTION: 3

### Consider the following statements pertaining to arc welding: 1. AC arc welding electrodes are coated with sodium silicate binders. 2. DC arc welding electrodes are coated with potassium silicate binders. 3. Potassium has a lower ionization potential as compared with sodium. 4. Reignition requires a voltage higher than the normal arc voltage. Which of the above statements are valid?

Solution:

1.  AC arc welding electrodes are coated with potassium silicate binders.
2. DC arc welding electrodes are coated with sodium silicate binders.
3. An AC arc must reignite itself after every crossing of the zero current instant. Reignition requires a voltage higher than the normal arc voltage.
4. The process of reignition of an arc is facilitated by the presence of ions having a low ionization potential.

QUESTION: 4

Adiabatic temperature in thermit welding is of the order of

Solution:

Thermit welding chemical reaction:
8 Al + 3 Fe3O4 = 2Fe + 4 Al2O3 + ΔH The adiabatic temperature is calculated to be of the order of 3000°C.

QUESTION: 5

The soldering process is carried out in the temperature range

Solution:
QUESTION: 6

The process of joining metal sheet by means of a fusible alloy or metal applied in the molten state is called

Solution:

Soldering is the joining process in which the metal items are joined together by flowing' a molten filler metal to into the joint. The filler metal used in the process is called solder and its melting point is less than 425°C. There is no melting of base metal and the joint is essentially an alloying between the solder and the base metal.

QUESTION: 7

The main constituents of soldering alloy are

Solution:

The solder used for the soldering operation may be
1. a soft solder which is an alloy of lead and tin in varying proportions.
2. a hard solder which is copper-zinc alloy, copper-silver alloy or a nickel-silver alloy.

QUESTION: 8

An alloy of copper, zinc and silver often used in fabrication work is called

Solution:
QUESTION: 9

Flux is used in soldering to

Solution:

(b) The action of flux in soldering joints is
(i) to break and remove the oxide layer formed along the joined faces.
(ii) to aid the capillarity of the molten metal and facilitate its flow around and through the joint.
(iii) to act as cleansing agent for the removal of dirt etc.

QUESTION: 10

The process of joining metallic pieces by introducing non-ferrous alloys in the liquid state between the metallic piece and allowing to solidify is known as

Solution: