Courses

TCP/IP, Networking Quiz


15 Questions MCQ Test Placement Papers - Technical & HR Questions | TCP/IP, Networking Quiz


Description
This mock test of TCP/IP, Networking Quiz for Quant helps you for every Quant entrance exam. This contains 15 Multiple Choice Questions for Quant TCP/IP, Networking Quiz (mcq) to study with solutions a complete question bank. The solved questions answers in this TCP/IP, Networking Quiz quiz give you a good mix of easy questions and tough questions. Quant students definitely take this TCP/IP, Networking Quiz exercise for a better result in the exam. You can find other TCP/IP, Networking Quiz extra questions, long questions & short questions for Quant on EduRev as well by searching above.
QUESTION: 1

What layer in the TCP/IP stack is equivalent to the Transport layer of the OSI model?

Solution: The four layers of the TCP/IP stack (also called the DoD model) are Application/Process, Host-to-Host, Internet, and Network Access. The Host-to-Host layer is equivalent to the Transport layer of the OSI model.
QUESTION: 2

Which of the following services use TCP?

  1. DHCP
  2. SMTP
  3. HTTP
  4. TFTP
  5. FTP

Solution: SMTP, HTTP and FTP use TCP.
QUESTION: 3

Which of the following describe the DHCP Discover message?

  1. It uses FF:FF:FF:FF:FF:FF as a layer 2 broadcast.
  2. It uses UDP as the Transport layer protocol.
  3. It uses TCP as the Transport layer protocol.
  4. It does not use a layer 2 destination address.

Solution: A client that sends out a DHCP Discover message in order to receive an IP address sends out a broadcast at both layer 2 and layer 3. The layer 2 broadcast is all Fs in hex, or FF:FF:FF:FF:FF:FF. The layer 3 broadcast is 255.255.255.255, which means all networks and all hosts. DHCP is connectionless, which means it uses User Datagram Protocol (UDP) at the Transport layer, also called the Host-to-Host layer.
QUESTION: 4

You want to implement a mechanism that automates the IP configuration, including IP address, subnet mask, default gateway, and DNS information. Which protocol will you use to accomplish this?
Solution: Dynamic Host Configuration Protocol (DHCP) is used to provide IP information to hosts on your network. DHCP can provide a lot of information, but the most common is IP address, subnet mask, default gateway, and DNS information.
QUESTION: 5

Which of the following is private IP address?
Solution: Class A private address range is 10.0.0.0 through 10.255.255.255. Class B private address range is 172.16.0.0 through 172.31.255.255, and Class C private address range is 192.168.0.0 through 192.168.255.255.
QUESTION: 6

Which of the following allows a router to respond to an ARP request that is intended for a remote host?
Solution: Proxy ARP can help machines on a subnet reach remote subnets without configuring routing or a default gateway.
QUESTION: 7

The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
Solution: The four layers of the DoD model are Application/Process, Host-to-Host, Internet, and Network Access. The Internet layer is equivalent to the Network layer of the OSI model.
QUESTION: 8

Which of the following services use UDP?

  1. DHCP
  2. SMTP
  3. SNMP
  4. FTP
  5. HTTP
  6. TFTP
Solution: DHCP, SNMP, and TFTP use UDP.
QUESTION: 9

Which class of IP address provides a maximum of only 254 host addresses per network ID?
Solution: A Class C network address has only 8 bits for defining hosts: 28 - 2 = 254.
QUESTION: 10

If you use either Telnet or FTP, which is the highest layer you are using to transmit data?
Solution: Both FTP and Telnet use TCP at the Transport layer; however, they both are Application layer protocols, so the Application layer is the best answer.
QUESTION: 11

Which statements are true regarding ICMP packets?

  1. They acknowledge receipt of a TCP segment.
  2. They guarantee datagram delivery.
  3. They can provide hosts with information about network problems.
  4. They are encapsulated within IP datagrams.
Solution: Internet Control Message Protocol (ICMP) is used to send error messages through the network, but they do not work alone. Every segment or ICMP payload must be encapsulated within an IP datagram (or packet).
QUESTION: 12

Which of the following is the decimal and hexadecimal equivalents of the binary number 10011101?
Solution:

To turn a binary number into decimal, you just have to add the values of each bit that is a 1. The values of 10011101 are 128, 16, 8, 4, and 1. 128 + 16 + 8 + 4 + 1 = 157.

Hexadecimal is a base-16 number system. The values of hexadecimal are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F-16 characters total, from which to create all the numbers you'll ever need. So, if 1001 in binary is 9, then the hexadecimal equivalent is 9. Since we then have 1101, which is 13 in binary, the hexadecimal answer is D and the complete hexadecimal answer is 0x9D.

QUESTION: 13

Which of the following are layers in the TCP/IP model?

  1. Application
  2. Session
  3. Transport
  4. Internet
  5. Data Link
  6. Physical
Solution: This seems like a hard question at first because it doesn't make sense. The listed answers are from the OSI model and the question asked about the TCP/IP protocol stack (DoD model). However, let's just look for what is wrong. First, the Session layer is not in the TCP/IP model; neither are the Data Link and Physical layers. This leaves us with the Transport layer (Host-to-Host in the DoD model), Internet layer (Network layer in the OSI), and Application layer (Application/Process in the DoD).
QUESTION: 14

Which layer 4 protocol is used for a Telnet connection?
Solution: Although Telnet does use TCP and IP (TCP/IP), the question specifically asks about layer 4, and IP works at layer 3. Telnet uses TCP at layer 4.
QUESTION: 15

Which statements are true regarding ICMP packets?

  1. ICMP guarantees datagram delivery.
  2. ICMP can provide hosts with information about network problems.
  3. ICMP is encapsulated within IP datagrams.
  4. ICMP is encapsulated within UDP datagrams.
Solution: ICMP is used for diagnostics and destination unreachable messages. ICMP is encapsulated within IP datagrams, and because it is used for diagnostics, it will provide hosts with information about network problems.

Recommended Content

Recommended Tests

Similar Content

Related tests

Follow Us
© 2015-20 EduRev