Technical Mock Test CE (SSC JE)- 13

The size of a rivet is identified by

The maximum permissible stress for power drivenfield rivet in bearing on rivet is

The minimum clear cover (in mm) for the main reinforcement in column, according to IS : 456 -2000 is

the diamete of longitudinal bars of a RCC column should never be less than

In an RCC section of effective depth 'd' if vertical stirrups are provided to resist shear theirmaximum spacing measured along the axis of the member as per IS : 456 - 2000 should not exceed

Which of the beams given in the following is a determinate beam ?

The effective slenderness ratio of a cantileve coumn is

Moment of inertia of rectangular section shown if Fig. about its horizontal centroidal axis is

As the cement sets and hardens , it generated heat. This is called

For constructing road pavements, the type of cement generally used is

Aluminium is anodized to protect it from eathering effect by forming a surface coat of

Mild steel used in RCC structure conforms to

If whole circle bearing of a line is 2100º 0' 0", its value in quadranal bearing system is

The magnetic declination is the difference between

The maximum shear force in a simply supported  beam of span L, subjected to a central point load, W is given by the following expression :

If 'A' is the area of cross-section and 'I' is the moment of inertia of a given plane section, then
radius of gyration (r) is gien by the formula

Strain energy due to axial deformation is given by

s : resultant stress 
P : axial load
?: deformation 
e : strain
E : modulus of elasticity)

The ratio of the quantity of water stored in the root zone of the crops to the quantity of wateractually delivered in the field is known as

The global warming is caused mainly by

An aggregate is said to be flaky, if its leastdimension is less than

Separation of coarse aggregates from concret during transportation, is known as

If fineness modulus of a sand is 2.5, it is graded as

The dimension for Angular velocity is

Typically a hydroelectric plant will have following bydraulic machine:

Darcy Weisbach equation to calculate the head loss due to friction for flow through pipes isapplicable when the flow through the pipe can be

Capillarity is due to

I. surface tension

II. cohesion

III. viscosity

IV. vapour pressure

V. weight density of liquid

Manometer is a device used for measuring

Fineness test of cement gives us an estimate of :

A flyover segregates traffic with respect to :

Specific gravity has a unit

The percentage of the fine aggregate of fineness modulus 2.6 to be combined with coarseaggregate of fineness modulus 6.8 for obtaining the aggregates of fineness modulus 5.4, is :

The total energy line lies over the hydraulicgradient line by an amount equal to :

The correct prismodial formula for valumecalculation is :

In the quadrantal bearing system, a whole circle bearing of 293° 30' can be expressed as:

The property of a material by which it gets permanent deformation under a load which is notrecovered after removal of load is called:

Basalt stone is by nature:

The relationship between atmosphere pressure (P_atm), gage pressure (P_gage) and absolute
pressure (P_abs) is given b

The minimum percentage of longitudinal reinforcement in RCC column is :

Administrative head of public works department who is directly responsible to Governments is :

To obtain very high strength concrete, it is necessary to use very fine grained:

Which of the following has least carbon content ?

The maximum permissible stress for hand drivenrivet in axial tension is :

Generally concrete cubes are tested measure concrete's :

Which of the following is a dimensionless quantity ?

The plan of a building is in the form of square with centerline dimensions of outer walls as 14.7m × 14.7 m. if the thickness of the wall in superstructure is 0.30 m, then its plinth area is :

The specific gravity of bitumen is :

Factor of safety is the ratio of :

Diameter of a rivet hole is made larger than the diameter of the river by :

Moment of Inertia of rectangular section shown in Fig. about its base is

Workability of concrete is directly Proportionalto :

i. Time of transit

ii. Water cement ratio

iii. Gradin of aggregate

iv. Strength of concret

v. Aggregate cement ratio

Which of the following type of lime is used for underwater constructions ?

The concrete having a slump of 6.5 cm, is said to be :

Gravel and sand belongs to the following category of soils :

The minimum percentage of steel in R.C.C. slab using mild steel reinforcement in given by :

Specing of strirrups in a rectangular beam is :

Capillary rise a phenomenon that is attributed to the following property of fluid :

Segregation in the concerete when :

Admixture which cause early setting and hardening of concrete are called:

If R and T are rise and tread of a stair spanning horizontally and steps are supported by wall on one side and by stringer beam on the other side, the steps are designed as beam of width :

Generally the ratio of different ingredients (Cement Sand and aggregate) in concrete mixof grade M20 is :

The sledemess ratio of a column is zero when its length:

When 1cm on a map represents 10m on the ground, the representative fraction of the scale is

Most important constituents of cement are:

The relationship between void ratio 'e' and porosity 'n' is :

When the plastic limit of a soil is greater than the liquid ,limit, then the plasticity index is reported as:

When R is the radius of the curve (in metres), D is the degree of curve (in degrees) and length of the chord is 30 m, then the relation between R and D is :

To construct a massive dam the type of cement used is :

Calcium chloride added in concrete acts as :

A 40 cm diameter circular timber column is 4 m long. The slenderness ratio of the column is :

For 15 mm thick cement plastering 1 : 6 on 100 sq.m. new brick work, the quantity of cementrequired is

The most suitable stone for building piers is

Which of the following cements is suitable for use in urgent repairs of exisiting massive concrete structures such as large dams ?

A line joining some fixed points on the main survey lines is called

Which of the following methods of contouring most suitable for hilly terrain ?

The above figure represents plan and section of an excavation layout. The volume of erthwork in excavation of foundation trench is

If d be the diameter of MS or tor steel bars in mm, the standard weight (in kg) per metre of thebar is

Sand particles are made of

A shallow foundation is defined as a foundation which

If the volume of voids is equal to the volume of  solids in a soil mass, then the values of porosity and voids ratio respectively are

The lime stabilization is vey effective in treating

The specific speed for a turbine has the dimensions of

The water utilizable by plants is available in the form of

In a rectangular channel, the ratio of the specific energy at critical depth E_c to the critical depth y_cis

In case of biaxial stress, the maximum value of shear stress is given by

In highway construction on superelevated curves, the rolling shall proced from

Which one of the following sequences is the most suitable for treating raw surface water to make it suitable for drinkage purpose ?

The maximum dimension of a core section for a rectangular cross-section under eccentric loading on a column (b×d) is

The maximum deflection of a simply supported beam of effective span L and subjected to acentral concentrated load W is given by

The grade of concrete M 20 means that characteristic compressive strength of 15 cmcubes after 28 days is given by

You are asked to construct a massive concrete dam. The type of cement you will use is

The initial setting time of Ordinary Portland Cement (OPC) is

A structure which affers negligible or zero resistance on bending at any point is known as

The moment required to rotate the near end of a prismatic beam through unit angle, withouttranslation, the far end being fixed is

During the manufacture of Portland cement, gyppsum or plaster of paris is added to

If the modular ratio is 'm', stress ratio in steel and concrete is 'r', then the crictical neutral axisconstant 'k' is given by

Air entrainment in the concrete increases

Which of the following is added for quick setting of cement ?