Test: Resonance Part - 2


10 Questions MCQ Test Networking Theory | Test: Resonance Part - 2


Description
This mock test of Test: Resonance Part - 2 for Electrical Engineering (EE) helps you for every Electrical Engineering (EE) entrance exam. This contains 10 Multiple Choice Questions for Electrical Engineering (EE) Test: Resonance Part - 2 (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Resonance Part - 2 quiz give you a good mix of easy questions and tough questions. Electrical Engineering (EE) students definitely take this Test: Resonance Part - 2 exercise for a better result in the exam. You can find other Test: Resonance Part - 2 extra questions, long questions & short questions for Electrical Engineering (EE) on EduRev as well by searching above.
QUESTION: 1

The maximum voltage across capacitor would be

Solution:

Thevenin equivalent seen by L - C combination

QUESTION: 2

For the circuit shown in fig. P1.1.11 resonant frequency fo is

Solution:

Applying 1 A at input port V1 = 10 V
voltage across 1 A source

QUESTION: 3

For the circuit shown in fig. P1.11.13 the resonant frequency f0 is

Solution:


QUESTION: 4

The network function of circuit shown in fig.P1.11.14 is

The value of the C and A is

Solution:


QUESTION: 5


Solution:


QUESTION: 6


Solution:


QUESTION: 7

The value of input frequency is required to cause a gain equal to 1.5. The value is

Solution:



For any value of ω, R,C gain ≤ 1.
Thus (D) is correct option.

QUESTION: 8

In the circuit of fig. P1.11.18 phase shift equal to -45is required at frequency ω = 20 rad/s . The value of R is

Solution:


QUESTION: 9

For the circuit of fig. P1.11.19 the input frequency is adjusted until the gain is equal to 0.6. The value of the frequency is

Solution:


QUESTION: 10

Bode diagram of the network function Vo/Vs for the circuit of fig. P1.11.30 is

Solution:


-20 dB/decade line starting from ω = 5.56 rad s 20 dB/decade line starting from ω = 16.67 rad s Hence -20 dB/decade line for 5.56 < ω < 16.67 parallel to ω axis to ω > 16.67

Related tests