Description

This mock test of Tacheometric, Curve And Hydrographic Surveying - 2 for Civil Engineering (CE) helps you for every Civil Engineering (CE) entrance exam.
This contains 7 Multiple Choice Questions for Civil Engineering (CE) Tacheometric, Curve And Hydrographic Surveying - 2 (mcq) to study with solutions a complete question bank.
The solved questions answers in this Tacheometric, Curve And Hydrographic Surveying - 2 quiz give you a good mix of easy questions and tough questions. Civil Engineering (CE)
students definitely take this Tacheometric, Curve And Hydrographic Surveying - 2 exercise for a better result in the exam. You can find other Tacheometric, Curve And Hydrographic Surveying - 2 extra questions,
long questions & short questions for Civil Engineering (CE) on EduRev as well by searching above.

QUESTION: 1

If the focal length of the object glass is 25 cm and the distance from object glass to the trunnion axis is 15 cm, the additive constant is

Solution:

Additive constant = f + d = 0.25 + 0.15 = 0.40

QUESTION: 2

If the spacing of cross hairs in a stadia diaphragm of a tacheometer is 1.2 mm and the focal length of object glass is 24 cm, then the multiplying constant of tacheometer is

Solution:

QUESTION: 3

If an upgrade of 1.5% is followed by a downgrade of 0.5% and rate of change of grade is 0.2% per 20 m chain, then the length of vertical curve is

Solution:

Length of vertical curve,

QUESTION: 4

If ‘g_{1} ’ and ‘g_{2}’ are the two gradients, ‘r’ is the rate of change of grade (%) per chain, the length of the vertical curve will be

Solution:

QUESTION: 5

A transition curve is required for a circular curve of 200 m radius, the gauge being 1.5 m and maximum superelevation restricted to 15 cm. The transition is to be designed for a velocity such that no lateral pressure is imposed on the rails and rate of gain of radial acceleration is 30 cm/s^{2}. The required length of transition curve will be

Solution:

⇒ V = 14 m/s

∴

QUESTION: 6

The lengths of long chord and tangents of a circular curve are equal for a deflection angle of

Solution:

The length of long chord (L) = 2RsinΔ/2 and the

QUESTION: 7

The staff intercepts on a vertically held staff at a distance of 50 m and 200 m were found to be 0.49 m and 1.99 m respectively. The constants of instrument used are

Solution:

D_{1} = 50 = 0.49 K + C .......(i)

D_{2} = 200 = 1.99 K + C ......(ii)

On solving (i).and (ii) we get,

K = 100 and C = 1

### Tacheometric Surveying - Surveying, GATE

Doc | 9 Pages

### Surveying (Part - 2)

Doc | 13 Pages

### Plane Table Surveying - Surveying, GATE

Doc | 4 Pages

- Tacheometric, Curve And Hydrographic Surveying - 2
Test | 7 questions | 20 min

- Tacheometric, Curve And Hydrographic Surveying - 1
Test | 10 questions | 30 min

- Surveying - 2
Test | 20 questions | 60 min

- Surveying 2
Test | 20 questions | 12 min

- Surveying 2 MCQ
Test | 20 questions | 12 min