1 Crore+ students have signed up on EduRev. Have you? Download the App 
The crosssection of a beam in bending is as shown in the figure. It is subjected to shear force acting in the plane of crosssection. Which among the following figure shows the correct shear stress distribution across the depth of the crosssection of the beam?
A beam of square cross section ( S x B) is used as a beam with one diagonal horizontal. The location of the maximum shear stress from the neutral axis will be at distance o
Which one of the following diagrams indicates the shear stress distribution for the beam as shown in the figure below
A beam is of isection with flanges 200 mm x 10 mm and web 180 mm x 10 mm. Due to the bending moment applied on the beam section, maximum stress developed in the beam section is 100 MPa, what is the stress developed at inner edge of the flange?
A MS beam is subjected to a bending moment, such that a stress of 100 MPa is developed in a layer at a distance of 100 mm from the neutral layer. If E= 200 GPa, what is the radius of curvature of the beam?: .
A cantilever of uniform strength σ, having rectangular section of constant breadth b but variable depth d is subjected to a UDL throughout its length. If the depth of the section is 150 mm at the fixed end, then what is the depth of the middle of the length of cantilever
A beam with a square section of 80 mm x 80 mm is simply supported at its ends. A load W is applied at the centre of the beam. If the maximum shear stress developed in the beam section is 6 N/mm^{2}. What is the magnitude of W?
A lsection is subjected to transverse shear force. At which layer maximum shear stress is developed?
31 docs280 tests

31 docs280 tests
