Test: ILD & Rolling Loads -1 - Civil Engineering (CE) MCQ

# Test: ILD & Rolling Loads -1 - Civil Engineering (CE) MCQ

Test Description

## 10 Questions MCQ Test GATE Civil Engineering (CE) 2025 Mock Test Series - Test: ILD & Rolling Loads -1

Test: ILD & Rolling Loads -1 for Civil Engineering (CE) 2024 is part of GATE Civil Engineering (CE) 2025 Mock Test Series preparation. The Test: ILD & Rolling Loads -1 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: ILD & Rolling Loads -1 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: ILD & Rolling Loads -1 below.
Solutions of Test: ILD & Rolling Loads -1 questions in English are available as part of our GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) & Test: ILD & Rolling Loads -1 solutions in Hindi for GATE Civil Engineering (CE) 2025 Mock Test Series course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: ILD & Rolling Loads -1 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Test: ILD & Rolling Loads -1 - Question 1

### When a series of wheel loads crosses a simply supported girder, the maximum bending moment under any given wheel load occurs when

Detailed Solution for Test: ILD & Rolling Loads -1 - Question 1

The centre of span is midway between the centre of gravity of the load system and the wheel load under consideration

Test: ILD & Rolling Loads -1 - Question 2

### A uniformly distributed load whose length is shorter than the span, crosses a simply supported beam from left to right. The maximum bending moment at a section occurs when

Test: ILD & Rolling Loads -1 - Question 3

### The ordinates of influence line diagram for bending moment always have the dimension of

Test: ILD & Rolling Loads -1 - Question 4

In a 3 hinged arch
1. Influence line for horizontal thrust is parabolic.
2. Maximum horizontal thrust occurs when the unit load is at crown.
3. Maximum sagging moment occurs when the unit load is at section itself.

Which of these statements is correct?

Test: ILD & Rolling Loads -1 - Question 5

The influence line diagram for bending moment at section X(Mx), at a distance of 4 m from the left support of a simply supported girder AB is shown in figure below. A uniformly distributed load of intensity 2t/m longer than the span crosses the girder from left to right.

The maximum bending moment at section X is equal to

Detailed Solution for Test: ILD & Rolling Loads -1 - Question 5

The maximum bending moment at section-Xwill occur when UDL occupies the whole span.
Maximum bending = Area under the influence line diagram

Test: ILD & Rolling Loads -1 - Question 6

The Muller-Breslau principle can be used to
1. Determine the shape of the influence line
2. Indicate the parts of the structure to be loaded to obtain the maximum effect
3. Calculate the ordinates of the influence lines

Which of the these statements is/are correct?

Test: ILD & Rolling Loads -1 - Question 7

The influence line for shear at section x (Fx) at a distance of 4 m from the left supported girder AB is shown in figure

The shear force at section oe due to a uniformly distributed dead load of intensity 2 t/m covering the entire span will be

Detailed Solution for Test: ILD & Rolling Loads -1 - Question 7

SF will be equal to-the area under the influence line diagram,

Test: ILD & Rolling Loads -1 - Question 8

A beam with a cantilevered arm BC supporting a freely supported end span CD is shown in the figure. Which one of the figure represents the influence line diagram for shear force at A

Test: ILD & Rolling Loads -1 - Question 9

Which one of the following represents the correct influence line for bending moment at point C for the beam shown in the figure below:

Test: ILD & Rolling Loads -1 - Question 10

Three wheel loads 10t, 26t and 24t spaced 2m apart roll on a girder from left to right with the 10t load leading. The girder has a span of 20 meter. For the condition of maximum bending moment at a section 8 meter from the left end.

Detailed Solution for Test: ILD & Rolling Loads -1 - Question 10

Maximum bending moment at a section occurs when a particular load is on the section which changes the ratio
as the load passes over the section .

where R1, → resultant of load on left sid e of section Resultant of all loads (R)
= 10 + 26 + 24 = 60t

When 10t load crosses section C.

When 26t load crosses the section C,

It means that maximum bending moment is obtained when 26t load is on the section.

## GATE Civil Engineering (CE) 2025 Mock Test Series

31 docs|280 tests
In this test you can find the Exam questions for Test: ILD & Rolling Loads -1 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: ILD & Rolling Loads -1, EduRev gives you an ample number of Online tests for practice

## GATE Civil Engineering (CE) 2025 Mock Test Series

31 docs|280 tests