Test: Plate Girders - 1 - Civil Engineering (CE) MCQ

# Test: Plate Girders - 1 - Civil Engineering (CE) MCQ

Test Description

## 10 Questions MCQ Test GATE Civil Engineering (CE) 2025 Mock Test Series - Test: Plate Girders - 1

Test: Plate Girders - 1 for Civil Engineering (CE) 2024 is part of GATE Civil Engineering (CE) 2025 Mock Test Series preparation. The Test: Plate Girders - 1 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Plate Girders - 1 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Plate Girders - 1 below.
Solutions of Test: Plate Girders - 1 questions in English are available as part of our GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) & Test: Plate Girders - 1 solutions in Hindi for GATE Civil Engineering (CE) 2025 Mock Test Series course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Plate Girders - 1 | 10 questions in 30 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study GATE Civil Engineering (CE) 2025 Mock Test Series for Civil Engineering (CE) Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Test: Plate Girders - 1 - Question 1

### Economical depth of a plate girder is given by where M is maximum moment in the plate girder, σtw is allowable bending stress and tw is thickness of web

Detailed Solution for Test: Plate Girders - 1 - Question 1

The depth of plate girder is adjusted to get the minimum self-weight of the girder and that depth is called economical depth of plate girder,

σtw = Allowable bending stress in tension

Test: Plate Girders - 1 - Question 2

### Minimum spacing of vertical stiffeners is limited to where d is the distance between flange angles.

Detailed Solution for Test: Plate Girders - 1 - Question 2

Vertical stiffeners are provided at the spacing of 0.33 of to 1.5 d where d is the distance between the flanges ignoring fillets and if horizontal stiffeners are also provided d is the maximum clear depth of the web. Spacing can be reduced near the supports where the shear force is large compared to the centre of the girder.

Test: Plate Girders - 1 - Question 3

### Consider the following statements in respect of design of web and flange splices 1. Flange splice shall be designed for actual BM at the section 2. Flange splice shall be designed to resist the actual shear at the section 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM Which of these statements are correct

Test: Plate Girders - 1 - Question 4

Consider the following statements:
Horizontal stiffener is provided when
1. The depth of web is small.
2. Tendency to web buckling is less.
3. Vertical stiffeners become too close.
4. Only thin plates are available for web.
Which of these statements are correct?

Test: Plate Girders - 1 - Question 5

In steel bridges, for span less than 9 m and class AA loading for wheeled vehicles, the impact factor is taken as

Test: Plate Girders - 1 - Question 6

Horizontal stiffeners are needed in plate girders if the thickness of web is
where d = distance between flanges;
L = span

Test: Plate Girders - 1 - Question 7

Which one of the following is correct?
An intermediate vertical stiffener connected to the web is designed to withstand a shearing force of not less than
where t is web thickness in mm and h is the outstand of stiffener in mm.

Detailed Solution for Test: Plate Girders - 1 - Question 7

As per clause 6.7.4.6 of IS: 800-1984, intermediate horizontal stiffeners not subjected to external loads shall be connected to web by rivets or welds, so as to withstand a shearing force, between each component of the stiffener and the web of not less than,
125t2/h kN/m

Test: Plate Girders - 1 - Question 8

Which one of the following is the most efficient section for a simply supported gantry Girder.

Test: Plate Girders - 1 - Question 9

In a plate girder, flange angle should be

Detailed Solution for Test: Plate Girders - 1 - Question 9

Unequal flange angles with long horizontal leg; are provided to serve the following purposes:
1. To increase the moment of inertia of the section and
2. A large length is available for making the connection with the flange plate.

Test: Plate Girders - 1 - Question 10

The forces acting on the web splice of the plate girder are

## GATE Civil Engineering (CE) 2025 Mock Test Series

31 docs|280 tests
Information about Test: Plate Girders - 1 Page
In this test you can find the Exam questions for Test: Plate Girders - 1 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Plate Girders - 1, EduRev gives you an ample number of Online tests for practice

## GATE Civil Engineering (CE) 2025 Mock Test Series

31 docs|280 tests