Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  Topicwise Question Bank for Civil Engineering  >  Test: Structural Fasteners - 4 - Civil Engineering (CE) MCQ

Test: Structural Fasteners - 4 - Civil Engineering (CE) MCQ


Test Description

20 Questions MCQ Test Topicwise Question Bank for Civil Engineering - Test: Structural Fasteners - 4

Test: Structural Fasteners - 4 for Civil Engineering (CE) 2024 is part of Topicwise Question Bank for Civil Engineering preparation. The Test: Structural Fasteners - 4 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The Test: Structural Fasteners - 4 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Structural Fasteners - 4 below.
Solutions of Test: Structural Fasteners - 4 questions in English are available as part of our Topicwise Question Bank for Civil Engineering for Civil Engineering (CE) & Test: Structural Fasteners - 4 solutions in Hindi for Topicwise Question Bank for Civil Engineering course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt Test: Structural Fasteners - 4 | 20 questions in 60 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study Topicwise Question Bank for Civil Engineering for Civil Engineering (CE) Exam | Download free PDF with solutions
1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Structural Fasteners - 4 - Question 1

The cross-section of a standard fillet is a triangle whose base angles are 

Test: Structural Fasteners - 4 - Question 2

Tacking rivets in compression plates not exposed to the weather, have a pitch not exceeding 300 mm or

Test: Structural Fasteners - 4 - Question 3

Tacking rivets in tension members, are provided at a pitch in line not exceeding

Test: Structural Fasteners - 4 - Question 4

The effective section of a fillet weld Is represented by a triangle ABC with sides S1, S2 and S3 such that S3 > S2 > S1.

If the allowable shear stress in weld material is τ, the resistance of weld per unit length is 

Test: Structural Fasteners - 4 - Question 5

The steel parts at right angles, are welded with fillet weld of 10 mm size. The throat thickness of the fillet weld should be

Test: Structural Fasteners - 4 - Question 6

Which one of the following statements regarding the riveted joint shown in the given figure is correct?

Detailed Solution for Test: Structural Fasteners - 4 - Question 6

The rivets are assumed to resist the load equally in the elastic theory. Actually the outer rivets carry more load compared to rivets in the middle rows. When the load is increased, the more highly stressed rivets start yielding earlier and there is redistribution of load among rivets. The failure will occur when all rivets have yielded and the strength of the group of rivets is equal to the strength of one rivet multiplied by the number of rivets.

Test: Structural Fasteners - 4 - Question 7

Select the correct statement

Test: Structural Fasteners - 4 - Question 8

When the bolts are subjected to reversal of stresses, the most suitable type of bolt is

Test: Structural Fasteners - 4 - Question 9

A bolt is subjected to shear force V and tension T. The capacity of the bolt in resisting shear and tension respectively are V0 and T0. Which one of the following diagrams represents interaction relations?

Detailed Solution for Test: Structural Fasteners - 4 - Question 9

The interaction equation for a high tension bolt subjected to shear and tension is

According to IS : 800, the rivets and bolts subjected to both shear and tension shall be so proportioned that the calculated shear and axial forces do not exceed the respective allowable forces i.e.,

Further 
So curve(d) represents the interaction equation.

Test: Structural Fasteners - 4 - Question 10

The actual thickness of butt weld as compared to the thickness of plate is usually

Test: Structural Fasteners - 4 - Question 11

Bolts are most suitable to carry 

Test: Structural Fasteners - 4 - Question 12

Efficiency of a riveted joint, having the minimum pitch as per IS : 800, is 

Test: Structural Fasteners - 4 - Question 13

The ratio of yield stress in tension to compression in mild steel is

Test: Structural Fasteners - 4 - Question 14

Consider the riveted joint shown in figure. The maximum permissible value of ‘p’ (rivet diameter 20 mm) is

Test: Structural Fasteners - 4 - Question 15

If a bolt of nominal diameter 18 mm then gross dia for the standard clearance hole as per IS 800 : 2007 is

Detailed Solution for Test: Structural Fasteners - 4 - Question 15

Test: Structural Fasteners - 4 - Question 16

In which of the following cases is a structural fastener over designed?
1. When design is based on Unwin's formula
2. Long sustained loading leading to creep
3. When reversal of stresses takes place
4. In fatigue loading
Select the correct answer using the codes given below,

Test: Structural Fasteners - 4 - Question 17

20 mm diameter rivets are used to connect 10 mm thick piates. The permlssitcle stresses for rivets in shear and bearing are 80 MPa and 250 MPa respectively. The difference of rivet value in single shear and double shear is 

Detailed Solution for Test: Structural Fasteners - 4 - Question 17


Difference = 53.75 - 29.04 = 24.7 kN 

Test: Structural Fasteners - 4 - Question 18

Which type of joint shows maximum efficiency in case of connection of two plates?

Test: Structural Fasteners - 4 - Question 19

In which of the following case we avoid bolted connection

Detailed Solution for Test: Structural Fasteners - 4 - Question 19

Because bolted joints are susceptible to vibration and in case of frequent earthquake, it occurs.

Test: Structural Fasteners - 4 - Question 20

IS 800 : 2007 is based on

Detailed Solution for Test: Structural Fasteners - 4 - Question 20

New code of steel structures, IS : 800, has been formatted by considering limit state design method while earlier one was based on working stress method.

237 tests
Information about Test: Structural Fasteners - 4 Page
In this test you can find the Exam questions for Test: Structural Fasteners - 4 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Structural Fasteners - 4, EduRev gives you an ample number of Online tests for practice

Up next

Download as PDF

Up next

Download the FREE EduRev App
Track your progress, build streaks, highlight & save important lessons and more!