Test: MOSFET In Small Signal Operation - Electronics and Communication Engineering (ECE) MCQ
10 Questions MCQ Test Analog Circuits - Test: MOSFET In Small Signal Operation
An NMOS technology has μnCox = 50 μA/V2 and Vt = 0.7 V. For a transistor with L = 1μm, find the value of W that results in gm 1mA/V at ID = 0.5 mA.
Consider an NMOS transistor having kn= 2 mA/V2. Let the transistor be biased at VOV = 1V. For operation in saturation, what dc bias current ID results? If a +0.1-V signal is superimposed on VGS, find the corresponding increment in collector current by evaluating the total collector current ID and subtracting the dc bias current ID.
| 1 Crore+ students have signed up on EduRev. Have you? Download the App |
We know ID =1/2 kn (VGS + vgs – Vt)2. Let the signal vgs be a sine wave with amplitude Vgs, and substitute vgs = Vgs sin ω t in Eq.(5.43). Using the trigonometric identity show that the ratio of the signal at frequency 2ω to that at frequency ω , expressed as a percentage (known as the second-harmonic distortion) is
If in a particular application Vgs is 10 mV, find the minimum overdrive voltage at which the transistor should be operated so that the second-harmonic distortion is kept to less than 1%.
(Q.5-Q.7) An NMOS amplifier is to be designed to provide a 0.50-V peak output signal across a 50-kΩ load that can be used as a drain resistor.
If a gain of at least 5 V/V is needed, what value of gm is required?
Using a dc supply of 3 V, what values of ID and VOV would you choose?
What W/L ratio is required if μnCox = 200 μA/V2?
(Q.8-Q.9) For a 0.8-μm CMOS fabrication process: Vtn= 0.8 V, Vtp = −0.9 V, μnCox = 90 μA/V2, μpCox = 30 μA/V2, Cox = 1.9 fF/μm2, VA (n-channel devices) = 8L (μm), and |VA| (p-channel devices) = 12L (μm).
Q. Find the small-signal model parameters (gm, ro and gmb) for an NMOS transistor having W/L = 20 μm/2 μm and operating at ID = 100 μA and |VSB| = 1V.
Find the small-signal model parameters (gm, ro and gmb) for a PMOS transistor having W/L = 20 μm/2 μm and operating at ID = 100 μA and |VSB| = 1V.
The overdrive voltage at which each device must be operating is
|
3 videos|33 docs|64 tests
|
|
3 videos|33 docs|64 tests
|
Top Courses for Electronics and Communication Engineering (ECE)
Important Questions for MOSFET In Small Signal Operation
MOSFET In Small Signal Operation MCQs with Answers
Online Tests for MOSFET In Small Signal Operation Analog Circuits
|
© EduRev
|
Education Revolution
|
Follow Us
|
