Test: Operating Point of Transistor


10 Questions MCQ Test Analog Circuits | Test: Operating Point of Transistor


Description
This mock test of Test: Operating Point of Transistor for Electronics and Communication Engineering (ECE) helps you for every Electronics and Communication Engineering (ECE) entrance exam. This contains 10 Multiple Choice Questions for Electronics and Communication Engineering (ECE) Test: Operating Point of Transistor (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Operating Point of Transistor quiz give you a good mix of easy questions and tough questions. Electronics and Communication Engineering (ECE) students definitely take this Test: Operating Point of Transistor exercise for a better result in the exam. You can find other Test: Operating Point of Transistor extra questions, long questions & short questions for Electronics and Communication Engineering (ECE) on EduRev as well by searching above.
QUESTION: 1

Reverse saturation current of a common emitter transistor is

Solution:

Reverse saturation current is the collector current when emitter is open circuited and base-collector junction is reverse bias mode. In this mode of operation collector-base junction act as a reverse biased diode. The current in this reverse biased junction is known as reverse saturation current.

QUESTION: 2

Reverse collector saturation current ICBO is

Solution:

 Reverse collector current ICBO is collector-base current when emitter is open. This is same as reverse saturation current in ideal but have slight difference in practical.

QUESTION: 3

Reverse collector saturation is greater than Reverse saturation current because reverse collector saturation

Solution:

One of the reasons why reverse collector current exceeds the reverse saturation current is
Introduction of avalanche multiplication current in the base collector junction. This happens when high energy electron collides in the lattice it creates more number of electron and thus a greater current.

QUESTION: 4

Reverse collector saturation is greater than Reverse saturation current because reverse collector saturation

Solution:

One of the reasons why reverse collector current exceeds the reverse saturation current is
Introduction of avalanche multiplication current in the base collector junction. This happens when high energy electron collides in the lattice it creates more number of electron and thus a greater current.
Another reason is leakage current flowing through junction and surface. The ICBO also counts leakage current flowing through junction and surface.

QUESTION: 5

Which of the following statement about a common base transistor is true

Solution:

Common base transistor has very low input resistance (20Ω). It also has very high output resistance. Its current gain is less than unity and it has a medium voltage gain.

QUESTION: 6

Which of the following statement about a common emitter transistor is true

Solution:

Common emitter transistor has high output resistance (about 40k). It has low input resistance (about 1k). Current gain is high (20 to few hundreds). Voltage gain is medium.

QUESTION: 7

 Which of the following statement about a common collector transistor is true

Solution:

 common collector configuration has high input impedance and low output impedance. The current gain is high but voltage gain is low.

QUESTION: 8

Which of the following configuration is used as input stage of multistage amplifier

Solution:

Since input resistance is low and output resistance is high common base configuration is used as input stage of multistage amplifier. Common emitter configuration is used for audio signal amplification. Common collector is used for impedance matching.

QUESTION: 9

 Which of the following configuration is used for audio signal amplification

Solution:

Common base configuration is used as input stage of multistage amplifier. Since voltage gain is high, common emitter configuration is used for audio signal amplification. Common collector is used for impedance matching.

QUESTION: 10

Which of the following configuration is used for impedance matching

Solution:

Common base configuration is used as input stage of multistage amplifier. Common emitter configuration is used for audio signal amplification. Since input impedance is high and output impedance is low, common collector is used for impedance matching.

Related tests