Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test)


65 Questions MCQ Test GATE Past Year Papers for Practice (All Branches) | Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test)


Description
This mock test of Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test) for GATE helps you for every GATE entrance exam. This contains 65 Multiple Choice Questions for GATE Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test) (mcq) to study with solutions a complete question bank. The solved questions answers in this Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test) quiz give you a good mix of easy questions and tough questions. GATE students definitely take this Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test) exercise for a better result in the exam. You can find other Computer Science And Information Technology - CS 2015 GATE Paper (Practice Test) extra questions, long questions & short questions for GATE on EduRev as well by searching above.
QUESTION: 1

Q. 1 to Q. 5 carry 1 mark each

Q.

Didn'w you buy __________________ when you went shopping ?

Solution:
QUESTION: 2

Which of the following options is the closest in meaning to the sentence below? 

She enjoyed herself immensely at the party.

Solution:
QUESTION: 3

Which one of the following combinations is incorrect?

Solution:
QUESTION: 4

Based on the given statements, select the most appropriate option to solve the given question. If two floors in a certain building are 9 feet apart, how many steps are there in a set of stairs that extends from the first floor to the second floor of the building?

Statements:

I.   Each step is 3/4 foot high

II.  Each step is 1 foot wide.

Solution:

When we climb from one floor to other, it is the height that matters and not the width of the staircase.Therefore, From statement 1 only, we can figure out that 9 / (3/4) or 12 steps are required.

QUESTION: 5

Given Set A = {2, 3, 4, 5} and Set {11, 12, 13, 14, 15}, two numbers are randomly selected, one from each set. What is the probability that the sum of the two numbers equals 16?

Solution:
QUESTION: 6

Q. 6 to Q. 10 carry 2 mark each

Q. Select the alternative meaning of the underlined part of the sentence.
The chain snatchers "took to their heels" when the police party arrived.

Solution:
QUESTION: 7

The given statement is followed by some courses of action. Assuming the statement to be true, decide the correct option.

Statement:

There has been a significant drop in the water level in the lakes supplying water to the city.

Course of action

I. The water supply authority should impose a partial cut in supply to tackle the situation.

II. The government should appeal to all the residents through mass media for minimal use of water.

II. The government should ban the water supply in lower areas.

Solution:
*Answer can only contain numeric values
QUESTION: 8

The pie chart below has the breakup of the number of students form different departments in an engineering college for the year 2012. The proportion of male to female students in each department is 5:4. There are 40 males in Electrical Engineering. What is the difference between the numbers of female students in the Civil department and the female students in the Mechanical department?

 


Solution:
QUESTION: 9

The probabilities that a student passes in Mathematics, Physics and Chemistry are m, p, and c respectively

. Of these subjects, the student has 75% chance of passing in atleast one, a 50% chance of passing in atleast two and a 40% chance of passing in exactly two. Following relation are drawn in m, p, c.

I. p + m + c = 27/20

II. p + m + c = 13/20

III. (p)+(m)+(C)= 1/10

Solution:
QUESTION: 10

The number of students in a class who have answered correctly, wrongly, or not attempted each question in exam, are listed in the table below. The marks fro each question are also listed. There is no negative or partial marking.

What is the average of the marks obtained by the class in the examination?

Solution:
QUESTION: 11

Q. 11 – Q. 35 carry one mark each.

Q.

Solution:
QUESTION: 12

Solution:
QUESTION: 13

Match the following:

Solution:
QUESTION: 14

Which one of the following is the recurrence equation for the worst case time complexity of the Quicksort algorithm for sorting ???? ( ≥2) numbers? In the recurrence equations given in the options below, ???? is a constant.

Solution:
QUESTION: 15

The height of a tree is the length of the longest root-to-leaf path in it. The maximum and minimum number of nodes in a binary tree of height 5 are

Solution:
QUESTION: 16

Match the following:


(P) Condition coverage                        (i) Black-box testing
(Q) Equivalence class partitioning     (ii) System testing
(R) Volume testing                                 (iii) White-box testing
(S) Alpha testing                                    (iv) Performance testing

Solution:
QUESTION: 17

Which of the following is/are correct inorder traversal sequence(s) of binary search tree(s)?
I. 3, 5, 7, 8, 15, 19, 25
II. 5, 8, 9, 12, 10, 15, 25
III. 2, 7, 10, 8, 14, 16, 20
IV. 4, 6, 7, 9 18, 20, 25

Solution:
QUESTION: 18

Which one of the following is TRUE at any valid state in shift-reduce parsing?

Solution:
QUESTION: 19

Which one of the following is NOT equivalent to 

Solution:
QUESTION: 20

For a set A, the power set of A is denoted by 2A. If A={5,{6},{7}}, which of the following options are TRUE?

Solution:
QUESTION: 21

Consider a 4-bit Johnson counter with an initial value of 0000. The counting sequence of this counter is

Solution:
QUESTION: 22

For computers based on three-address instruction formats, each address field can be used to specify which of the following:

               (S1) A memory operand

               (S2) A processor register

               (S3) An implied accumulator register

Solution:
QUESTION: 23

Suppose two hosts use a TCP connection to transfer a large file. Which of the following statements is/are FALSE with respect to the TCP connection?

I. If the sequence number of a segment is m, then the sequence number of the subsequent segment is always m+1.
II. If the estimated round trip time at any given point of time is t sec, the value of the retransmission timeout is always set to greater than or equal to t sec.
III. The size of the advertised window never changes during the course of the TCP connection.
IV. The number of unacknowledged bytes at the sender is always less than or equal to the advertised window.

Solution:
QUESTION: 24

Suppose that everyone in a group of N people wants to communicate secretly with the N-1 others using symmetric key cryptographic system. The communication between any two persons should not be decodable by the others in the group. The number of keys required in the system as a whole to satisfy the confidentiality requirement is

Solution:
QUESTION: 25

Which of the following statements is/are FALSE?
I. XML overcomes the limitations in HTML to support a structured way of organizing content.
II. XML specification is not case sensitive while HTML specification is case sensitive.
III. XML supports user defined tags while HTML uses pre-defined tags.
IV. XML tags need not be closed while HTML tags must be closed.

Solution:
QUESTION: 26

Which one of the following fields of an IP header is NOT modified by a typical IP router?

Solution:
QUESTION: 27

In one of the pairs of protocols given below, both the protocols can use multiple TCP connections between the same client and the server. Which one is that?

Solution:
QUESTION: 28

For any two languages L1 and L2 such that L1 is context-free and L2 is recursively enumerable but not recursive, which of the following is/are necessarily true?

Solution:
*Answer can only contain numeric values
QUESTION: 29

Consider a system with byte-addressable memory, 32-bit logical addresses, 4 kilobyte page size and page table entries of 4 bytes each. The size of the page table in the system in megabytes is ________ .


Solution:
*Answer can only contain numeric values
QUESTION: 30

The following two functions P1 and P2 that share a variable B with an initial value of 2 execute concurrently.

The number of distinct values that B can possibly take after the execution is______________.


Solution:
QUESTION: 31

SELECT operation in SQL is equivalent to

Solution:
QUESTION: 32

A file is organized so that the ordering of data records is the same as or close to the ordering of data entries in some index. Then that index is called

Solution:
*Answer can only contain numeric values
QUESTION: 33

In the LU decomposition of the matrix, if the diagonal elements of U are both 1, then the lower diagonal entry l22 of L is________.


Solution:
*Answer can only contain numeric values
QUESTION: 34

The output of the following C program is__________.

void f1(int a, int b) {

int c;

c=a; a=b; b=c;

}

void f2(int *a, int *b) {

int c;

c=*a; *a=*b; *b=c;

}

int main()

{

int a=4, b=5, c=6;

f1(a,b);

f2(&b, &c);

printf(“%d”,c-a-b);

}


Solution:
QUESTION: 35

What are the worst-case complexities of insertion and deletion of a key in a binary search tree?

Solution:
*Answer can only contain numeric values
QUESTION: 36

Q. 36 – Q. 65 carry two marks each.

Q.

Suppose that the stop-and-wait protocol is used on a link with a bit rate of 64 kilobits per second and 20 milliseconds propagation delay. Assume that the transmission time for the acknowledgement and the processing time at nodes are negligible. Then the minimum frame size in bytes to achieve a link utilization of at least 50% is______________.


Solution:
QUESTION: 37

Consider a max heap, represented by the array: 40, 30, 20, 10, 15, 16, 17, 8, 4.

Now consider that a value 35 is inserted into this heap. After insertion, the new heap is

Solution:
*Answer can only contain numeric values
QUESTION: 38

Consider the following C program segment.

while(first <= last) {

if (array[middle] < search)

first = middle + 1;

else if (array[middle] == search) found = TRUE;

else last = middle - 1;

middle = (first + last)/2;

}

if (first > last) notPresent = TRUE;

The cyclomatic complexity of the program segment is ________.


Solution:
*Answer can only contain numeric values
QUESTION: 39

Consider a LAN with four nodes S1, S2, S3 and S4. Time is divided into fixed-size slots, and a node can begin its transmission only at the beginning of a slot. A collision is said to have occurred if more than one node transmit in the same slot. The probabilities of generation of a frame in a time slot by S1, S2, S3 and S4 are 0.1, 0.2, 0.3 and 0.4, respectively. The probability of sending a frame in the first slot without any collision by any of these four stations is _____________.


Solution:
QUESTION: 40

The binary operator ≠ is defined by the following truth table.

Which one of the following is true about the binary operator ≠?

Solution:
*Answer can only contain numeric values
QUESTION: 41


Solution:
QUESTION: 42

Suppose L={??,??,??,??,??} is a lattice represented by the following Hasse diagram:

Solution:
QUESTION: 43

Consider the operations

Which one of the following is correct?

Solution:
*Answer can only contain numeric values
QUESTION: 44

Let G be a connected planar graph with 10 vertices. If the number of edges on each face is three, then the number of edges in G is ___________.


Solution:
QUESTION: 45

Let an represent the number of bit strings of length n containing two consecutive 1s. What is the recurrence relation for an?

Solution:
QUESTION: 46

A variable x is said to be live at a statement Si in a programif the following three conditions hold simultaneously:
i. There exists a statement Sj that uses x
ii. There is a path from Si to Sj in the flow graph corresponding to the program
iii. The path has no intervening assignment to x including at Si and Sj

 

The variables which are live both at the statement in basic block 2 and at the statement in basic block 3 of the above control flow graph are

Solution:
*Answer can only contain numeric values
QUESTION: 47

The least number of temporary variables required to create a three-address code in static single assignment form for the expression q + r / 3 + s – t * 5 + u * v /w is _______________.


Solution:
*Answer can only contain numeric values
QUESTION: 48

Consider an Entity-Relationship (ER) model in which entity sets E1 and E2 are connected by an m : n relationship R12. E1 and E3 are connected by a 1 : n (1 on the side of E1 and n on the side of E3) relationship R13.

E1 has two single-valued attributes a11 and a12 of which a11 is the key attribute. E2 has two single-valued attributes a21 and a22 of which a21 is the key attribute. E3 has two single-valued attributes a31 and a32 of which a31 is the key attribute. The relationships do not have any attributes.

If a relational model is derived from the above ER model, then the minimum number of relations that would be generated if all the relations are in 3NF is _______.


Solution:
*Answer can only contain numeric values
QUESTION: 49

Consider the DFAs M and N given above. The number of states in a minimal DFA that accepts the language L(M) ∩ L(N) is____________________


Solution:
QUESTION: 50

Consider the NPDA (Q=q1,q2,q3}, Σ={0,1}, Γ={0,1,⊥}, δ? , q0, ⊥, F={q2}), where (as per usual convention) Q is the set of states, Σ is the input alphabet, Γ is the stack alphabet, δ is the state transition function, q0 is the initial state, ⊥ is the initial stack symbol, and F is the set of accepting states. The state transition is as follows:

Which one of the following sequences must follow the string 101100 so that the overall string is accepted by the automaton?

Solution:
QUESTION: 51

Let G = (V, E) be a simple undirected graph, and sbe a particular vertex in it called the source. For x∈V, let d(x) denote the shortest distance in G from s to x. A breadth first search (BFS) is performed starting at s. Let T be the resultant BFS tree. If (u,v) is an edge of G that is not in T, then which one of the following CANNOT be the value of d(u)-d(v)?

Solution:
*Answer can only contain numeric values
QUESTION: 52

Consider a uniprocessor system executing three tasks T1, T2 and T3, each of which is composed of an infinite sequence of jobs (or instances) which arrive periodically at intervals of 3, 7 and 20 milliseconds, respectively. The priority of each task is the inverse of its period, and the available tasks are scheduled in order of priority, with the highest priority task scheduled first. Each instance of T1, T2 and T3 requires an execution time of 1, 2 and 4 milliseconds, respectively. Given that all tasks initially arrive at the beginning of the 1st millisecond and task preemptions are allowed, the first instance of T3 completes its execution at the end of _____________ milliseconds.


Solution:
QUESTION: 53

A positive edge-triggered D flip-flop is connected to a positive edge-triggered JK flip-flop as follows. The Q output of the D flip-flop is connected to both the J and K inputs of the JK flip-flop, while the Q output of the JK flip-flop is connected to the input of the D flip-flop. Initially, the output of the D flip-flop is set to logic one and the output of the JK flip-flop is cleared. Which one of the following is the bit sequence (including the initial state) generated at the Q output of the JK flip-flop when the flip-flops are connected to a free-running common clock? Assume that J = K = 1 is the toggle mode and J = K = 0 is the state-holding mode of the JK flip-flop. Both the flip-flops have non-zero propagation delays.

Solution:
*Answer can only contain numeric values
QUESTION: 54

Consider a disk pack with a seek time of 4 milliseconds and rotational speed of 10000 rotations per minute (RPM). It has 600 sectors per track and each sector can store 512 bytes of data. Consider a file stored in the disk. The file contains 2000 sectors. Assume that every sector access necessitates a seek, and the average rotational latency for accessing each sector is half of the time for one complete rotation. The total time (in milliseconds) needed to read the entire file is ____________.


Solution:
*Answer can only contain numeric values
QUESTION: 55

Consider a non-pipelined processor with a clock rate of 2.5 gigahertz and average cycles per instruction of four. The same processor is upgraded to a pipelined processor with five stages; but due to the internal pipeline delay, the clock speed is reduced to 2 gigahertz. Assume that there are no stalls in the pipeline. The speed up achieved in this pipelined processor is_________.


Solution:
*Answer can only contain numeric values
QUESTION: 56

Suppose the following disk request sequence (track numbers) for a disk with 100 tracks is given: 45, 20, 90, 10, 50, 60, 80, 25, 70. Assume that the initial position of the R/W head is on track 50. The additional distance that will be traversed by the R/W head when the Shortest Seek Time First (SSTF) algorithm is used compared to the SCAN (Elevator) algorithm (assuming that SCAN algorithm moves towards 100 when it starts execution) is____________ tracks.


Solution:
QUESTION: 57

Consider a main memory with five page frames and the following sequence of page references: 3, 8, 2, 3, 9, 1, 6, 3, 8, 9, 3, 6, 2, 1, 3. Which one of the following is true with respect to page replacement policies First In First Out (FIFO) and Least Recently Used (LRU)?

Solution:
*Answer can only contain numeric values
QUESTION: 58


Solution:
QUESTION: 59

Consider the following 2×2 matrix A where two elements are unknown and are marked by a and b. The eigenvalues of this matrix are -1 and 7. What are the values of a and b?

Solution:
QUESTION: 60

An algorithm performs (log n)1/2 find operations, Ninsert operations, (log n)1/2 delete operations, and (log n)1/2 decrease-key operations on a set of data items with keys drawn from a linearly ordered set. For a delete operation, a pointer is provided to the record that must be deleted. For the decrease-key operation, a pointer is provided to the record that has its key decreased. Which one of the following data structures is the most suited for the algorithm to use, if the goal is to achieve the best total asymptotic complexity considering all the operations?

Solution:
*Answer can only contain numeric values
QUESTION: 61

Consider the following relations:

Consider the following SQL query.

SELECT S.Student_Name, sum(P.Marks)

FROM Student S, Performance P

WHERE S.Roll_No = P.Roll_No

GROUP BY S.Student_Name

The number of rows that will be returned by the SQL query is _____________.


Solution:
QUESTION: 62

What is the output of the following C code? Assume that the address of x is 2000 (in decimal) and an integer requires four bytes of memory.

int main () {

              unsigned int x[4][3] =

                     { {1,2,3},{4,5,6},{7,8,9},{10,11,12}};

               printf(“%u, %u, %u”, x+3, *(x+3), *(x+2)+3);

}

Solution:
*Answer can only contain numeric values
QUESTION: 63

The graph shown below has 8 edges with distinct integer edge weights. The minimum spanning tree (MST) is of weight 36 and contains the edges: {(A, C), (B, C), (B, E), (E, F), (D, F)}. The edge weights of only those edges which are in the MST are given in the figure shown below. The minimum possible sum of weights of all 8 edges of this graph is ___________.


Solution:
QUESTION: 64

Consider the following C function.

int fun1(int n){

int i,j,k,p,q=0;

for (i=1; i<n; ++i) {

p=0;

for (j=n; j>1; j=j/2)

++p;

for (k=1; k<p; k=k*2)

++q;

}

return q;

}

Which one of the following most closely approximates the return value of the function fun1?

Solution:
QUESTION: 65

Consider the following pseudo code, where x and y are positive integers.

begin

q := 0

r := x
while ?? ≥ ?? do

begin

r := r – y

q := q + 1

end

end

The post condition that needs to be satisfied after the program terminates is

Solution: