1 Crore+ students have signed up on EduRev. Have you? 
Q. 1 – Q. 5 carry one mark each.
Out of the following four sentences, select the most suitable sentence with respect to grammar and usage.
‘until’ itself is negative so it can’t take one more negative i.e., ‘does not’. Hence, Option (D) is the right answer
A rewording of something written or spoken is a ______________.
‘paraphrase’ means a restatement of a text, passage or a rewording of something written or spoken.
Archimedes said, “Give me a lever long enough and a fulcrum on which to place it, and I will move the world.”
The sentence above is an example of a ___________ statement
‘figurative’ means representing by a figure or resemblance or expressing one thing in terms
normally denoting another with which it may be regarded as analogous.
A cube is built using 64 cubic blocks of side one unit. After it is built, one cubic block is removed from every corner of the cube. The resulting surface area of the body (in square units) after the removal is __________.
From given data, 64 cubic blocks of one unit
Sizes are formed
No of faces of the Cube is ‘6’
No of corners of the Cube is ‘8’
After removing one Cubic block from
Each corner, The resulting surface area of the body = 6 * (4) = 96 sq. Units.
If ‘relftaga’ means carefree, ‘otaga’ means careful and ‘fertaga’ means careless, which of the following could mean ‘aftercare’?
‘taga’ and ‘care’ are a matching pair in every combination.
So, ‘taga’ surely represents ‘care’.
Also, note here that the second half of the word in encoded value refers to the first half of the word in the decoded value.
So, ‘fer’ represents ‘less’, ‘relf’ represents ‘free’ and ‘o’ represents ‘full’.
Going by the same logic, the answer would be tagazen, i.e., C.
Q. 6 – Q. 10 carry two marks each.
A shaving set company sells 4 different types of razors, Elegance, Smooth, Soft and Executive. Elegance sells at Rs. 48, Smooth at Rs. 63, Soft at Rs. 78 and Executive at Rs. 173 per piece. The table below shows the numbers of each razor sold in each quarter of a year.
Which product contributes the greatest fraction to the revenue of the company in that year?
Total Revenue
More revenue is on executive
Indian currency notes show the denomination indicated in at least seventeen languages. If this is not an indication of the nation’s diversity, nothing else is.
Which of the following can be logically inferred from the above sentences?
If seventeen languages were not an indication of the nation’s diversity, nothing else is. If nothing else is so the best inference is option ‘D’
Consider the following statements relating to the level of poker play of four players P, Q, R and S.
I. P always beats Q
II. R always beats S
III. S loses to P only sometimes
IV. R always loses to Q
Which of the following can be logically inferred from the above statements?
(i) P is likely to beat all the three other players
(ii) S is the absolute worst player in the set
From the given data
Player P > Player Q
Player R > Player S
Player S < Player P (sometimes only)
Player R < Player Q
Player ‘P’ > Player ‘Q’ > Player ‘R’ > Player ‘S’
Logically, the statement (i) is definitely true, but statement (ii) is not
Option ‘A’ is true
If f(x) = 2x^{7}+3x−5, which of the following is a factor of f(x)?
In a process, the number of cycles to failure decreases exponentially with an increase in load. At a load of 80 units, it takes 100 cycles for failure. When the load is halved, it takes 10000 cycles for failure. The load for which the failure will happen in 5000 cycles is ________.
The number of simultaneous equations to be solved in the slope deflection method, is equal to :
Slope Deflection Method, is a type of displacement method. In displacement method, the deflection and rotation are unknowns. For every joint we can write a relation between the moments and displacements. Thus, to solve for the structure number of simultaneous equations to be solved in the slope deflection method is equal to the number of joints in the structure.
The type of partial differential equation
If the entries in each column of a square matrix M add up to 1, then an eigenvalue of M is
All Options are correct
Type II error in hypothesis testing is
Type II error means acceptance of the null hypothesis when it is false and should be
rejected
The number of revolutions of a current meter in 50 seconds were found to be 12 and 30 corresponding to the velocities of 0.25 and 0.46 m/s respectively. What velocity (in m/s) would be indicated by 50 revolutions of that current meter in one minute ?
Consider the plane truss with load P as shown in the figure. Let the horizontal and vertical reactions at the joint B be H_{B} and V_{B}, respectively and V_{C} be the vertical reaction at the joint C.
Which one of the following sets gives the correct values of V_{B}, H_{B} and V_{C}?
In shear design of an RC beam, other than the allowable shear strength of concrete ( τ_{c}), there is also an additional check suggested in IS 4562000 with respect to the maximum permissible shear stress ( τ_{cmax}) . The check for τ_{cmax} is required to take care of
If T_{v} > T_{c max} , diagonal compression failure occurs in concrete
The semicompact section of a laterally unsupported steel beam has an elastic section modulus, plastic section modulus and design bending compressive stress of 500 cm^{3}, 650 cm3 and 200 MPa, respectively. The design flexural capacity (expressed in kNm) of the section is _________
Bull's trench kiln is used in the manufacturing of
Bulls Trench kiln is used for manufacturing bricks
The compound which is largely responsible for initial setting and early strength gain of Ordinary Portland Cement is
The compound responsible for initial setting and early strength gain in OPC is C_{3}S
In the consolidated undrained trixal test on a saturated soil sample, the pore water pressure is zero
In consolidated undrained test, at the first stage consolidation will be allowed to take place. Since, consolidation takes place due to excess pore water pressure, the soil will continue to consolidate and at the end of consolidation stage will be completed implying pore water pressure in the soil to be zero.
Since, in the second stage drainage is not allowed, thus, water may drain in or out during the shearing stage thus, leading to development of pore water pressure again.
A fine grained soil is found to be plastic in the water content range of 2648%. As per Indian standard classificatin system, the soil is classified as
wP = 26%,
wL = 48%
Since wL lies in the range of 35  50%, it is intermediate compressible. Hence soils is CI.
A vertical cut is to be made in a soil mass having cohesion c, angle of internal friction φ, and unit wieght γ, considering k_{o }and k_{p} as the coefficients of active and passive earth pressure, respectively, the maximum depth of unsupported excavation is
The direct runoff hydrograph in response to 5cm rainfall excess in a catchment is shown in the figure. The area of the catchment (expressed in hectares) is ____________
The type of flood routing (Group I) and the equation(s) used for the purpose (Group II) are given below.
The correct match is
Hydrologic RoutingAlso known as lumped routing. Flow is only a function of time. Considers the use of continuity equation,
Hydraulic Flood RoutingAlso known as distributed routing. Flow is a function of space and time. Considers the use of continuity equation and momentum equation.
The prejump Froude number for a particular flow in a horizontal rectangular channel is 10. The ratio of sequent depths (i.e., postjump depth to prejump depth) is ____________
Precursors to photochemical oxidants are
Crown corrosion in a reinforced concrete sewer is caused by:
It was decided to construct a fabric filter, using bags of 0.45 m diameter and 7.5 m long, for removing industrial stack gas containing particulates. The expected rate of airflow into the filter is 10 m3/s. If the filtering velocity is 2.0 m/min, the minimum number of bags (rounded to nearest higher integer) required for continuous cleaning operation is
Match the items in Group – I with those in Group – II and choose the right combination.
During a forensic investigation of pavement failure, an engineer reconstructed the graphs P, Q, R and S, using partial and damaged old reports.
Theoretically plausible correct graphs according to the 'Marshall mixture design output' are
The graph wrong among the given is ‘R’
The correct graph should be
In a onelane oneway homogeneous traffic stream, the observed average headway is 3.0 s. The flow (expressed in vehicles/hr) in this traffic stream is________
Some of the structural strength of a clayey material that is lost by remoulding is slowly recovered with time. This property of soils to undergo an isothermal geltosoiltogel transformation upon agitation and subsequent rest is termed :
The system that uses the Sun as a source of electromagnetic energy and records the naturally radiated and reflected energy from the object is called
Geographical Information SystemA geographic information system (GIS) is a system designed to capture, store, manipulate, analyze, manage, and present all types of geographical data.
Global Positioning System Developed by USA, uses satellites to position/locate a point on map.
Passive Remote Sensing The system that uses the Sun as a source of electromagnetic energy and records the naturally radiated and reflected energy from the object.
Active Remote Sensing Active sensors, provide their own source of energy to illuminate the objects they observe.
The staff reading taken on a workshop floor using a level is 0.645 m. The inverted staff reading taken to the bottom of a beam is 2.960 m. The reduced level of the floor is 40.500 m. The reduced level (expressed in m) of the bottom of the beam is
Floor reduced level = 40.5 m
RL of bottom of beam = 40.5 + 0.645 + 2.96
= 44.105 m
Q. 36 – Q. 65 carry two marks each
Probability density function of a random variable X is given below
P(X ≤ 4) is
The area of the region bounded by the parabola y= x^{2}+ 1 and the straight line x+y=3 is
The magnitudes of vectors P, Q and R are 100 kN, 250 kN and 150 kN, respectively as shown in the figure.
The respective values of the magnitude (in kN) and the direction (with respect to the xaxis) of the resultant vector are
At a rated capacity of 44 Cumecs, a centrifugal pump develops 36 m of head when operating at 1450 rpm. Its specific speed is :
A 3 m long simply supported beam of uniform cross section is subjected to a uniformly distributed load of w = 20 kN/m in the central 1 m as shown in the figure.
If the flexural rigidity (EI) of the beam is 30 x 106 Nm^{2}, the maximum slope (expressed in radians) of the deformed beam is
Max. BM at the centre of beam = 10*1.5 – 20*0.5*0.25 = 12.5 kNm
Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δ_{max1} and θ_{max1}, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δ_{max2} and θ_{max2}, respectively.
Which one of the following relationships is true?
A plane truss with applied loads is shown in the figure.
The members which do not carry any force are
A rigid member ACB is shown in the figure. The member is supported at A and B by pinned and guided roller supports, respectively. A force P acts at C as shown. Let RAh and RBh be the horizontal reactions at supports A and B, respectively, and RAv be the vertical reaction at support A. Selfweight of the member may be ignored.
Which one of the following sets gives the correct magnitudes of R_{Av,} R_{Bh} and R_{Ah} ?
A reinforced concrete (RC) beam with width of 250 mm and effective depth of 400 mm is reinforced with Fe415 steel. As per the provisions of IS 4562000, the minimum and maximum amount of tensile reinforcement (expressed in mm^{2}) for the section are, respectively
For M25 concrete with creep coefficient of 1.5, the longterm static modulus of elasticity (expressed in MPa) as per the provisions of IS:4562000 is ________
A propped cantilever of span L carries a vertical concentrated load at the midspan. If the plastic moment capacity of the section is M_{p}, the magnitude of the collapse load is
Two plates are connected by fillet welds of size 10 mm and subjected to tension, as shown in the figure. The thickness of each plate is 12 mm. The yield stress and the ultimate tensile stress of steel are 250 MPa and 410 MPa, respectively. The welding is done in the workshop (γ_{mw} = 1.25).
As per the Limit State Method of IS 800: 2007, the minimum length (rounded off to the nearest higher multiple of 5 mm) of each weld to transmit a force P equal to 270 kN (factored) is
The Optimistic Time (O), Most likely Time (M) and Pessimistic Time (P) (in days) of the activities in the critical path are given below in the format OMP.
The expected completion time (in days) of the project is _________
Expected completion time of the project = 10.33 + 8.16 + 7.16 + 12.16
= 37.81 days
The porosity (n) and the degree of saturation (S) of a soil sample are 0.7 and 40%, respectively. In a 100 m^{3 }volume of the soil, the volume (expressed in m^{3}) of air is _________
A homogeneous gravity retaining wall supporting a cohesionless backfill is shown in the figure. The lateral active earth pressure at the bottom of the wall is 40 kPa.
The minimum weight of the wall (expressed in kN per m length) required to prevent it from overturning about its toe (Point P) is
An undisturbed soil sample was taken from the middle of a clay layer (i.e., 1.5 m below GL), as shown in figure. The water table was at the top of clay layer. Laboratory test results are as follows:
A compacted fill of 2.5 m height with unit weight of 20 kN/m^{3} is placed at the ground level.
Assuming unit weight of water as10 kN/m^{3}, the ultimate consolidation settlement (expressed in mm) of the clay layer is ____________
A seepage flow condition is shown in the figure. The saturated unit weight of the soil γ_{sat} = 18 kN/m^{3}. Using unit weight of water, γ_{w} = 9.81 kN/m^{3}, the effective vertical stress (expressed in kN/m^{2}) on plane XX is ________
A drained triaxial compression test on a saturated clay yielded the effective shear strength parameters as c' = 15 kPa and φ' = 22°. Consolidated Undrained triaxial test on an identical sample of this clay at a cell pressure of 200 kPa developed a pore water pressure of 150 kPa at failure. The deviator stress (expressed in kPa) at failure is _________
A concrete gravity dam section is shown in the figure. Assuming unit weight of water as 10 kN/m^{3} and unit weight of concrete as 24 kN/m^{3}, the uplift force per unit length of the dam (expressed in kN/m) at PQ is _________
Seepage is occurring through a porous media shown in the figure. The hydraulic conductivity values (k_{1}, k_{2}, k_{3}) are in m/day.
The seepage discharge (m^{3}/day per m) through the porous media at section PQ is
A 4 m wide rectangular channel, having bed slope of 0.001 carries a discharge of 16 m^{3}/s. Considering Manning's roughness coefficient = 0.012 and g = 10 m/s^{2}, the category of the channel slope is
A sector gate is provided on a spillway as shown in the figure. Assuming g = 10 m/s^{2}, the resultant force per meter length (expressed in kN/m) on the gate will be __________
A hydraulically efficient trapezoidal channel section has a uniform flow depth of 2 m. The bed width (expressed in m) of the channel is __________
Effluent from an industry 'A' has a pH of 4.2. The effluent from another industry 'B' has double the hydroxyl (OH^{}) ion concentration than the effluent from industry 'A'. pH of effluent from the industry 'B' will be __________
An electrostatic precipitator (ESP) with 5600 m^{2} of collector plate area is 96 percent efficient in treating 185 m^{3}/s of flue gas from a 200 MW thermal power plant. It was found that in order to achieve 97 percent efficiency, the collector plate area should be 6100 m^{2}. In order to increase the efficiency to 99 percent, the ESP collector plate area (expressed in m^{2}) would be ______
The 2day and 4day BOD values of a sewage sample are 100 mg/L and 155 mg/L, respectively. The value of BOD rate constant (expressed in per day) is _________
A two lane, oneway road with radius of 50 m is predominantly carrying lorries with wheelbase of 5 m. The speed of lorries is restricted to be between 60 kmph and 80 kmph. The mechanical widening and psychological widening required at 60 kmph are designated as w_{me},60 and w_{ps},60, respectively. The mechanical widening and psychological widening required at 80 kmph are designated as w_{me},80 and w_{ps},80, respectively. The correct values of w_{me},60, w_{ps} ,60, w_{me},80, w_{ps},80, respectively are
While traveling along and against the traffic stream, a moving observer measured the relative flows as 50 vehicles/hr and 200 vehicles/hr, respectively. The average speeds of the moving observer while traveling along and against the stream are 20 km/hr and 30 km/hr, respectively. The density of the traffic stream (expressed in vehicles/km) is _________
The vertical angles subtended by the top of a tower T at two instrument stations set up at P and Q, are shown in the figure. The two stations are in line with the tower and spaced at a distance of 60 m. Readings taken from these two stations on a leveling staff placed at the benchmark (BM = 450.000 m) are also shown in the figure. The reduced level of the top of the tower T (expressed in m) is _________
407 docs127 tests

Use Code STAYHOME200 and get INR 200 additional OFF

Use Coupon Code 
407 docs127 tests








