Electrical Engineering (EE) Exam  >  Electrical Engineering (EE) Tests  >  Electrical Engineering SSC JE (Technical)  >  Test: Electrical & Electronic Measurements- 1 - Electrical Engineering (EE) MCQ

Test: Electrical & Electronic Measurements- 1 - Electrical Engineering (EE) MCQ


Test Description

20 Questions MCQ Test Electrical Engineering SSC JE (Technical) - Test: Electrical & Electronic Measurements- 1

Test: Electrical & Electronic Measurements- 1 for Electrical Engineering (EE) 2024 is part of Electrical Engineering SSC JE (Technical) preparation. The Test: Electrical & Electronic Measurements- 1 questions and answers have been prepared according to the Electrical Engineering (EE) exam syllabus.The Test: Electrical & Electronic Measurements- 1 MCQs are made for Electrical Engineering (EE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Electrical & Electronic Measurements- 1 below.
Solutions of Test: Electrical & Electronic Measurements- 1 questions in English are available as part of our Electrical Engineering SSC JE (Technical) for Electrical Engineering (EE) & Test: Electrical & Electronic Measurements- 1 solutions in Hindi for Electrical Engineering SSC JE (Technical) course. Download more important topics, notes, lectures and mock test series for Electrical Engineering (EE) Exam by signing up for free. Attempt Test: Electrical & Electronic Measurements- 1 | 20 questions in 12 minutes | Mock test for Electrical Engineering (EE) preparation | Free important questions MCQ to study Electrical Engineering SSC JE (Technical) for Electrical Engineering (EE) Exam | Download free PDF with solutions
Test: Electrical & Electronic Measurements- 1 - Question 1

An electrodynamometer type of instruments finds its major use as

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 1

Precision type electrodynamometer is used in standardization process of potentiometer.

It is a transfer instrument. A transfer instrument is one which is calibrated with a d.c. source and used without any modifications for a.c. measurements. It has same accuracy for both D.C. and A.C. measurements.

Hence an electrodynamometer type of instruments are used as both standard and transfer instruments.

Test: Electrical & Electronic Measurements- 1 - Question 2

An instrument transformer is used to extend the range of-

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 2

Instrument transformers are of two types.

1. Potential transformer

2. Current transformer

These are used to extend the range of induction type of instruments.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Electrical & Electronic Measurements- 1 - Question 3

Perfect reproducibility means the instrument has

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 3

Reproducibility: It is the degree of closeness with which given value may be repeatedly measured. It may be specified in terms of units for a given period of time.

Perfect reproducibility means that the instrument has no drift.

No drift means that with a given input the measured values do not vary with time.

Test: Electrical & Electronic Measurements- 1 - Question 4

A wattmeter reads 25.34 W. The absolute error in measurement is -0.11 W. What is the true value of power:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 4

Given that,

Measured value = 25.34 W

Absolute error = -0.11 W

Absolute error = Measured value – true value

⇒ -0.11 = 25.34 – true value

⇒ 25.34 + 0.11 = 25.45 W

Test: Electrical & Electronic Measurements- 1 - Question 5

For wire wound strain gauges, the gauge factor is defined as-

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 5

The gauge factor is defined as the ratio of per unit change in resistance to per unit change in length.

Gauge factor,

Where ε = strain = ΔL/L

The gauge factor can be written as

= Resistance change due to change of length + Resistance change due to change in area + Resistance change due to piezo resistive effect

If the change in the value of resistivity of a material when strained is neglected, the gauge factor is:

The above equation is valid only when Piezo resistive effect that is change in resistivity due to strain is almost neglected.

For wire wound strain gauges, Piezo resistive effect is almost negligible.

Test: Electrical & Electronic Measurements- 1 - Question 6

Which one of the following types of instruments does suffer from error due to magnetic hysteresis?

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 6

Hysteresis error in PMMC Instrument: It can be reduced by providing Al frame in the moving system since AL is having a thin hysteresis loop. So that the difference between magnetic fields is less. We can’t eliminate hysteresis error but we can reduce.

Hysteresis error in MI Instrument: Hysteresis error is more in MI instruments. Due to hysteresis effect, the value flux density for the same current, while ascending and descending are different. While descending, the flux density is high and while ascending it is lesser. So we can reduce this error by using small iron parts which can demagnetize quickly.

Hysteresis error in EMMC Instrument: Hysteresis error is absent in EMMC instruments, since there is no iron related material in the moving system.

Order of Hysteresis error in descending order

MI > PMMC > EMMC

Test: Electrical & Electronic Measurements- 1 - Question 7

For accuracy of the instrument which is necessary

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 7
Answer:
Introduction

The accuracy of an instrument is crucial in obtaining reliable and precise measurements. To ensure accuracy, certain factors need to be considered. Among these factors, conformity and precision play significant roles. Let's explore these concepts further.


Conformity

  • Conformity refers to the extent to which an instrument adheres to a recognized standard or specification.

  • An instrument that conforms to the established standards is more likely to provide accurate measurements.

  • Conformity ensures that the instrument is calibrated correctly and operates within acceptable limits.

  • It involves verifying and validating the instrument against known standards or reference materials.


Precision

  • Precision refers to the degree of consistency or reproducibility in obtaining repeated measurements using the same instrument.

  • A precise instrument will produce measurements that are close to each other, even if they are not close to the true value.

  • Precision is determined by the instrument's ability to minimize random errors and variations in measurements.

  • It can be assessed by calculating statistical parameters such as standard deviation or coefficient of variation.


Importance of Both Conformity and Precision

  • Conformity and precision are both essential for ensuring accuracy in measurements.

  • Conformity ensures that the instrument is properly calibrated and aligned with recognized standards, reducing systematic errors.

  • Precision ensures that the instrument produces consistent and reproducible measurements, minimizing random errors.

  • While conformity addresses systematic errors, precision addresses random errors, collectively improving the overall accuracy of measurements.


Conclusion

In conclusion, both conformity and precision are necessary for achieving accuracy in instrument measurements. Conformity ensures that the instrument is calibrated and aligned with recognized standards, while precision ensures that measurements are consistent and reproducible. By considering both factors, the accuracy of the instrument can be maximized, leading to reliable and trustworthy measurements.

Test: Electrical & Electronic Measurements- 1 - Question 8

A null type of instrument as compared to a deflecting type instrument has

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 8

The accuracy of null type instruments is higher than that of deflection type. This is because the opposing effect is calibrated with the help of standards which have high degree of accuracy. Accuracy of deflection type instruments is dependent upon their calibration which depends upon the instrument constants which are normally not known to a high degree of accuracy.

In the null type of instruments, the measured quantity is balanced out. This means the detector has to cover a small range around the balance (null) point and therefore can be made highly sensitive. Also the detector need not be calibrated since it has only to detect the presence and direction of unbalance and not the magnitude of unbalance. A deflection type of instrument must be larger in size, more rugged, and thus less sensitive if it is to measure large magnitude of unknown quantity.

Deflection type of instruments have faster response than null type instruments.

Test: Electrical & Electronic Measurements- 1 - Question 9

A pointer of the instrument once deflected returns to zero position when the current is removed due to:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 9

The controlling torque is to control the pointer to a definite value which is proportional to quantity being measured. In absence of controlling torque, the pointer will swing beyond its final steady state position and the deflection will be indefinite. After removal of moving mechanism the pointer has to come back to its initial position, but in absence of controlling torque the pointer won’t come back to its initial position. The following mechanism can be used for producing controlling torque.

The deflecting torque is used for deflection, the controlling torque acts opposite to the deflecting torque. So before coming to rest the pointer always oscillates due to inertia, so to bring the pointer rest within a short time we will use damping torque without effecting controlling torque (or) inertia.

Test: Electrical & Electronic Measurements- 1 - Question 10

Two 100V Full scale PMMC type dc voltmeter having figure of merit of 10 kΩ/v and 20 kΩ/v are connected series .The series combination can be used to measure a maximum dc voltage of 

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 10

Now IFSD 1=0.1mA ,IFSD2=0.05mA

So,voltmeter 2 reads the full scales current allowed is 0.05mA and and voltmeter one reads half of its full scale value so the total reading is 150V.

Test: Electrical & Electronic Measurements- 1 - Question 11

The value of resistances in a potential divider arrangement to convert a basic d Arsonval meter movement with an internal resistance of 100 Ω and a full scale current of 1 mA to a multi range DC voltmeter with ranges 0-150 V and 0-300 V are:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 11

Given that,

Im = 1 mA

Rm = 100 Ω

Vm = ImRm = 0.1 V



Test: Electrical & Electronic Measurements- 1 - Question 12

The power in a 3 phase circuit is measured with the help of 2 watt meters. The reading of one of watt meters is positive and that of the others is negative. The magnitude of readings is different. It can be concluded that the power factor of the circuit is

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 12

We know that, power factor is given by

Given that,

W1 = +ve value

W2 = -ve value

Here power factor angle varies from 60 degrees to 90 degrees.

Hence power factor varies from zero to 0.5 lagging

Test: Electrical & Electronic Measurements- 1 - Question 13

The current and potential coils of a dynamometer type wattmeter were accidentally interchanged while connecting. After energizing the circuit, it was observed that the wattmeter did not show the reading, this could be due to:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 13

Electrodynamometer instrument has two fixed coils and one moving coil. For using this instrument as a wattmeter to measure the power, the fixed coils acts as a current coil and must be connected in series with a load. The moving coil acts as a pressure coil and must be connected across the supply terminals.

In the question given that, the current and potential coils of a dynamometer type wattmeter were accidentally interchanged while connecting. Hence total voltage applies across current coil which has very less resistance which leads to damage the current coil.

Test: Electrical & Electronic Measurements- 1 - Question 14

Which of the following is not a type of wattmeter?

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 14

Moving coil permanent magnet instrument can be used as ammeter and voltmeter but not as wattmeter.

Electrodynamometer instrument has two fixed coils and one moving coil. For using this instrument as a wattmeter to measure the power, the fixed coils act as a current coil and must be connected in series with a load. The moving coil acts as a pressure coil and must be connected across the supply terminals.

Electrostatic watt-meters are used for measurement of small amount of power, practically when the voltage is high and power factor is low. This type of wattmeter is also used for measurement of dielectric loss of cables on alternating voltage and for calibration of watt-meters and energy meters.

Test: Electrical & Electronic Measurements- 1 - Question 15

The power of 6-phase circuit can be measured with a minimum of:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 15

According to Blondel’s theorem the no. of watt-meters to be required to measure the total power in n-phase system is either N (or) (N – 1). When separate neutral wire is available in the system the no. of watt-meters to be required is N. When the neutral wire is not available in the system, then the no. of watt-meters to be required is (N – 1). One line is acts as a common line for return path.

Hence minimum number of watt-meters required = 5

Test: Electrical & Electronic Measurements- 1 - Question 16

One single phase wattmeter operating on 230 V and 5 A for 5 hours makes 1940 revolutions. Meter constant in revolution is 400. The power factor of the load will be:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 16

Given that,

Voltage (V) = 230 V

Current (I) = 5 A

Time (t) = 5 hours


Number of revolutions = 1940

Meter constant = 400

Test: Electrical & Electronic Measurements- 1 - Question 17

A single phase energy meter has a constant of 1200 revolution/kWh. When a load of 200 W is connected, the disc rotates at 4.2 revolutions per min. If the load is on for 10 hours, the meter records an excess of

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 17

True Kwh = 200 × 10 = 2 kWh

Given that, disc rotates at 4.2 revolutions per minute.

Recorded revolutions = 4.2 × 60 × 10 = 2520

Meter constant = 1200 revolution/kWh

Measured value of kWh = 2520/1200 = 2.1 kW

Excess value of record = measured value – true value = 2.1 – 2 = 0.1 kW

Test: Electrical & Electronic Measurements- 1 - Question 18

Match List-I (Transducer) with List-2 (Characteristics) and select the correct answer using codes given below the lists:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 18

Thermocouple has constant temperature at one end.

With a negative temperature coefficient thermistor, when the temperature increases the resistance will decreases.

A strain gauge is a sensor whose resistance varies with applied force. It converts force, pressure, tension, weight, etc., into a change in electrical resistance which can then be measured.

Linear variable differential transformer is a common type of electromechanical transducer that can convert the rectilinear motion of an object to which it is coupled mechanically into a corresponding electrical signal.

Test: Electrical & Electronic Measurements- 1 - Question 19

The purpose of SYNC control in a CRO is to:

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 19

There must be synchronization between the sweep and the signal being measured. Synchronization is done to produce stationary pattern.

SYNC control in a CRO is used to lock the display of signal.

Test: Electrical & Electronic Measurements- 1 - Question 20

Which one of the following is a passive transducer?

Detailed Solution for Test: Electrical & Electronic Measurements- 1 - Question 20

Transducers which require an external power source for their operation is called as a passive transducer. They produce an output signal in the form of some variation in resistance, capacitance or any other electrical parameter, which then has to be converted to an equivalent current or voltage signal. LVDT is an example of passive transducer. LVDT is used as an inductive transducer that convert motion into the electrical signal.

10 videos|75 docs|31 tests
Information about Test: Electrical & Electronic Measurements- 1 Page
In this test you can find the Exam questions for Test: Electrical & Electronic Measurements- 1 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Electrical & Electronic Measurements- 1, EduRev gives you an ample number of Online tests for practice

Up next

Download as PDF

Up next