Civil Engineering (CE) Exam  >  Civil Engineering (CE) Tests  >  MPPGCL JE Civil Mock Test Series 2025  >  MPPGCL JE Civil Mock Test - 4 - Civil Engineering (CE) MCQ

MPPGCL JE Civil Mock Test - 4 - Civil Engineering (CE) MCQ


Test Description

30 Questions MCQ Test MPPGCL JE Civil Mock Test Series 2025 - MPPGCL JE Civil Mock Test - 4

MPPGCL JE Civil Mock Test - 4 for Civil Engineering (CE) 2024 is part of MPPGCL JE Civil Mock Test Series 2025 preparation. The MPPGCL JE Civil Mock Test - 4 questions and answers have been prepared according to the Civil Engineering (CE) exam syllabus.The MPPGCL JE Civil Mock Test - 4 MCQs are made for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for MPPGCL JE Civil Mock Test - 4 below.
Solutions of MPPGCL JE Civil Mock Test - 4 questions in English are available as part of our MPPGCL JE Civil Mock Test Series 2025 for Civil Engineering (CE) & MPPGCL JE Civil Mock Test - 4 solutions in Hindi for MPPGCL JE Civil Mock Test Series 2025 course. Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free. Attempt MPPGCL JE Civil Mock Test - 4 | 100 questions in 120 minutes | Mock test for Civil Engineering (CE) preparation | Free important questions MCQ to study MPPGCL JE Civil Mock Test Series 2025 for Civil Engineering (CE) Exam | Download free PDF with solutions
MPPGCL JE Civil Mock Test - 4 - Question 1

The respective ratio between the present ages of Roshan and Rakesh is 6: 11. Four years ago, the ratio of the ages was 1: 2 respectively. What will be Rakesh’s age after five years? 

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 1

MPPGCL JE Civil Mock Test - 4 - Question 2

Which revolution in the world inspired the Indians to set up a socialist economy?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 2

During that time Lenin introduced the idea of a socialist, cooperative economy and emphasized collectivisation .Hence, these values inspired Indians to set up a socialist economy.

1 Crore+ students have signed up on EduRev. Have you? Download the App
MPPGCL JE Civil Mock Test - 4 - Question 3

Which of the following does not include election procedure?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 3

Booth capturing is a type of electoral fraud in which party loyalists "capture" a polling booth and vote in place of legitimate voters to ensure that their candidate wins.

MPPGCL JE Civil Mock Test - 4 - Question 4
State animal of Haryana is:
Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 4

The correct answer is the Blackbuck.

Important Points

  • The Blackbuck is the state animal of Haryana. In India hunting of Blackbuck is ban under the Wildlife Protection Act of 1972, due to excessive hunting and habitat degradation of Blackbucks during the 20th century.
  • The Blackbuck or an Indian antelope are found in India, Nepal, and Pakistan. They have a lifespan of approximately 10 to 15 years.

Additional Information

  • Black Francolin of the pheasant family is the State bird of Haryana.
  • There are 2 National parks located in Haryana viz, Sultanpur National Park located in Gurugram and Kalesar National Park located in Yamunanagar.
  • Chinkara also known as Indian Gazelle is the state animal of Rajasthan.
MPPGCL JE Civil Mock Test - 4 - Question 5

Study the following carefully and answer the given question.

Which region denotes singers, who are directors but not actors?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 5

From the diagram given below:

The shaded part represents the singers, who are directors but not actors.

Hence, the correct answer is "7".

MPPGCL JE Civil Mock Test - 4 - Question 6

Pipes R and T together can fill a tank in 40 minutes. If Pipe R alone can fill it in 90 minutes, in how many minutes can Pipe T alone fill it?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 6


Hence, Option B is correct.

MPPGCL JE Civil Mock Test - 4 - Question 7

Direction: If a Paper (Transparent Sheet) is folded in a manner and a design or pattern is drawn. When unfolded this paper appears as given below in the answer figure. Choose the correct answer figure given below.

Which of the answer figures can be formed using the question figure:
Question Figure

Answer figure

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 7

MPPGCL JE Civil Mock Test - 4 - Question 8

The LCM of two numbers is 1920 and their HCF is 16. If one of the number is 128, find the other number.

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 8

Using Rule 1 :
1st number × 2nd number = L.C. M. × H.C.F,
We have,
First number × second number = LCM × HCF

MPPGCL JE Civil Mock Test - 4 - Question 9

For constructing dams and foundation, the type of cement generally used is:

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 9
For constructing dams and foundations, the type of cement generally used is port lands blast furnace cement.
MPPGCL JE Civil Mock Test - 4 - Question 10

Expansion joints are provided if the length of the concrete structure exceeds -

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 10
Expansion joints have to be provided can be determined after considering various factors, such as temperature, exposure to weather, the time and season of the laying of the concrete, etc. Normally structures exceeding 45 m in length are designed with one or more expansion joints.
MPPGCL JE Civil Mock Test - 4 - Question 11

A submerged weir is one in which the water level on the side of the down stream of the weir is:

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 11
When the water level on the downstream side of a weir is above the top surface of a weir, it is known as submerged or drowned weir, as shown in the figure. The total discharge over such a weir is found out by splitting up the height of the water, above the sill of the weir, into two portions.
MPPGCL JE Civil Mock Test - 4 - Question 12

Primary treatment of sewage consists of :

MPPGCL JE Civil Mock Test - 4 - Question 13

The ratio of liquid to plasticity index for a soil mass is called -

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 13
Liquidity index

Shrinkage ratio- It is defined as the ratio of a given volume change in a soil expressed as a percentage of dry volume to the corresponding change in water content above the shrinkage limit.

Consistency index

MPPGCL JE Civil Mock Test - 4 - Question 14

Coefficient of earth pressure at rest is given by -

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 14
Coefficient of Earth Pressure at Rest ((K0)−)(K0=μ/(1−μ))

For a perfectly cohesion-less soil C=0

If the soil normally consolidated (N.C. soil)

For over consolidated soil (OC soil) K0oc=K0NC

Where, (μ)= Poisson’s ratio (ϕ)= friction angle (IP)= plasticity index

O.C.R. = Over consolidated ratio

MPPGCL JE Civil Mock Test - 4 - Question 15

Gypsum is added to cement

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 15

Gypsum acts as a retarder. It counteracts the fast rate of hydration (for which C3A is primarily responsible) to prevent flash set.

MPPGCL JE Civil Mock Test - 4 - Question 16

Select the related word/letters from the given alternatives.
Ctrl + X : Cut : : Ctrl + C : ?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 16

Ctrl + X are shortcut for cut in computer. Similarly, Ctrl + C are shortcut in computer for Copy.

MPPGCL JE Civil Mock Test - 4 - Question 17

The operation of removing humps and hollows of the uniform concrete surface is known as-

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 17
The operation of removing humps and hollows of the uniform concrete surface is known as Screeding.

Hence the option B is correct.

MPPGCL JE Civil Mock Test - 4 - Question 18

Permissible compressive strength of M200 concrete grade is-

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 18
Permissible compressive strength of M200 concrete grade is 200 kg/cm2

Hence the option C is correct.

MPPGCL JE Civil Mock Test - 4 - Question 19

According to IS 456 - 1978, the thickness of reinforced concrete footing on piles at its edge is kept less than-

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 19
In reinforced concrete footing, the thickness at the edge shall not be less than 150 mm for footings on soils, noir less than 300 mm above the tops of piles for footing on piles.

Hence the option C is correct.

MPPGCL JE Civil Mock Test - 4 - Question 20

Centre of buoyancy always -

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 20
Coincides with the centric of the volume of the displaced fluid

The center of buoyancy is the point where if you were to take all of the displaced fluid and hold it by that point, it would remain perfectly balanced, assuming you could hold fluid in a fixed shape. The center of buoyancy for an object is the center of mass for the fluid it displaces.

Hence correct answer is option B.

MPPGCL JE Civil Mock Test - 4 - Question 21

Spherical shape of droplets of mercury is due to -

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 21
Spherical shape of droplets of mercury is due to high surface tension.

Mercury has the force of adhesion less than the force of cohesion and prefers to stick to itself rather than the glass surface. To achieve this, mercury takes a spherical shape to minimize its contact with the glass surface.

Hence, the correct option is (b).

MPPGCL JE Civil Mock Test - 4 - Question 22

The relative density of soil samples given by:

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 22
Relative density is an index that quantifies the degree of packing between the loosest and densest possible state of coarse grain soil. It is experimentally determined and driven by,

Hence the correct answer is option B.

MPPGCL JE Civil Mock Test - 4 - Question 23

Which of the following method is used for speed and delay study?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 23
We use different methods like the Floating-car method, moving-vehicle method, ANPR, videos, and GPS to study the accurate Travel Time and Delay surveys.

Hence, the correct option is (b).

MPPGCL JE Civil Mock Test - 4 - Question 24

The effective width of the flangs of T-beam is given is,

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 24

It is that portion of the slab that acts integrally with the beam and extends on either side of the beam forming the compression zone. The effective width of the flange mainly depends upon the span of beams, the thickness of the slab, and the breadth of the web. It also depends upon the type of loads and support conditions.

The effective width of the flange should not be greater than the breadth of the web plus half the sum of clear distances to the adjacent beams on either side.

Hence the correct answer is option B.

MPPGCL JE Civil Mock Test - 4 - Question 25

The penman evapotranspiration equation is based on

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 25
The penman formula is a semi-empirical equation combining mass transfer (Ea) and energy budget (H) methods. The formula was developed by Penman in 1948 and is still widely used for calculating the potential evaporation using synoptic meteorological data.

Hence the correct answer is option D.

MPPGCL JE Civil Mock Test - 4 - Question 26

Taste and odor in water are, generally, removed by the method of-

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 26
Adding powdered activated carbon to water or using granular activated carbon (GAC) in the water filter can remove taste and odor. Powdered activated carbon (PAC) is the preferred method when the taste and odor are moderate and infrequent.
MPPGCL JE Civil Mock Test - 4 - Question 27

Plywood is obtained by gluing wooden sheets at a pressure of:

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 27
Plywood is obtained by gluing wooden sheets at a pressure of 100 to 150 N/cm2 and a temperature of 100 to 130 degrees Celsius. Plywood is made up of three or more thin layers of wood. These layers are bonded together with an adhesive.
MPPGCL JE Civil Mock Test - 4 - Question 28

The limit of the percentage of the longitudinal reinforcement in a column is :

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 28
The cross-sectional area of longitudinal reinforcement, shall not be less than 0.8% not more than 6% (if bars are not lapped) of the gross cross-sectional area of the column.

Hence, the correct option is (C)

MPPGCL JE Civil Mock Test - 4 - Question 29

Consider the following statements –

1. The size of a theodolite is defined by the diameter of the graduated circle of the lower plate.

2. The process of establishing intermediate points, on a given straight line whose ends are intervisible, is done with a theodolite is called lining in.

3. Removal of parallax may be achieved by refocusing the eyepiece.

4. An imaginary line passing through the optical center of the eyepiece in the telescope of a surveying instrument is called the line of collimation.

Which of the above statement are correct?

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 29
1. The size of the theodolite is defined by the diameter of the graduated circle of the lower plate.

2. The process of establishing intermediate points, on a given straight line whose ends are intervisible is done with a theodolite is called lining in.

3. Removal of parallax may be achieved by refocusing the eyepiece and the objective.

4. Line of collimation: It is an imaginary line passing through the intersection of the crosshairs at the diaphragm and the optical center of the object glass and its continuation.

5. Axis of Bubble tube: It is an imaginary line tangential to the longitudinal curve of the bubble tube at its midpoint.

6. Axis of a telescope: This axis is an imaginary passing through the optical center of the object-glass and the optical center of the eye-piece.

MPPGCL JE Civil Mock Test - 4 - Question 30

Which among the following metals is toxic to humans.

Detailed Solution for MPPGCL JE Civil Mock Test - 4 - Question 30
As per BIS 10500 drinking water standards:
  • The permissible limit of mercury is less than 0.001 mg/l i.e., at very small concentrations elemental form of mercury is toxic to the central and peripheral nervous systems of humans

  • Mercury inhalation can damage respiratory systems and hamper lungs and kidneys

View more questions
20 tests
Information about MPPGCL JE Civil Mock Test - 4 Page
In this test you can find the Exam questions for MPPGCL JE Civil Mock Test - 4 solved & explained in the simplest way possible. Besides giving Questions and answers for MPPGCL JE Civil Mock Test - 4, EduRev gives you an ample number of Online tests for practice

Top Courses for Civil Engineering (CE)

Download as PDF

Top Courses for Civil Engineering (CE)