The rectangular beam of width, 250 mm is having an effective depth of 317 mm. The concrete grade is M20 and the grade of reinforcing steel is Fe415. The moment capacity of the section due to concrete as per limit state method is:
1 Crore+ students have signed up on EduRev. Have you? Download the App |
For a granular soil, with an increasing void ratio, the critical hydraulic gradient:
Cement will have higher ultimate strength, less generation of heat and less cracking if:
A circular shaft can transmit a torque of 5kNm. If the torque is reduced to 4kNm, then the maximum value of bending moment that can be applied to the shaft is-
Moment of inertia is a concept application in the case of :
Partial safety factors for concrete and steel respectively may be taken as-
According to IS : 456-2000, the maximum reinforcement in a column is-
Lap length in compression shall not be less than-
The pressure distribution at the base of a flexible foundation for all types of soil is-
If the thickness of the thinnest outside plate is 20 mm, then the maximum pitch of rivets in tension will be taken as -
The ratio between peak hourly water demand and maximum daily demand (per hour, of course) is.
The submerged unit weight for completely saturated soil is given by-
A beam is defined as a structural member subjected to-
The relation between coefficient of consolidation Cv, time factor TV, drainage path d, and time t is given by
Which one of the following states falls under the 'Limit state of Serviceability' as per IS - 456?
In the limit state method of design, the failure criterion for reinforced concrete beams and columns is-
What is the minimum number of longitudinal bars provided in a reinforced concrete column of circular cross-section?
Which of the following is examined to determine the age of timber?
To obtain a very high strength concrete, one should use very fine-grained:
If the ratio of the span to the overall depth does not exceed 7, the stiffness of the beam will ordinarily be satisfactory in case of a