Test: Highway Transportation- 2


25 Questions MCQ Test Civil Engineering SSC JE (Technical) | Test: Highway Transportation- 2


Description
This mock test of Test: Highway Transportation- 2 for Civil Engineering (CE) helps you for every Civil Engineering (CE) entrance exam. This contains 25 Multiple Choice Questions for Civil Engineering (CE) Test: Highway Transportation- 2 (mcq) to study with solutions a complete question bank. The solved questions answers in this Test: Highway Transportation- 2 quiz give you a good mix of easy questions and tough questions. Civil Engineering (CE) students definitely take this Test: Highway Transportation- 2 exercise for a better result in the exam. You can find other Test: Highway Transportation- 2 extra questions, long questions & short questions for Civil Engineering (CE) on EduRev as well by searching above.
QUESTION: 1

Maximum camber recommended by IRC is

Solution:
QUESTION: 2

The minimum value of camber provided for thin bituminous surface hill roads, is

Solution:

Thin bituminous surface 1÷40 = 0.025.
0.025 convert to %.
So 0.025*100 = 2.5%.

QUESTION: 3

The minimum value of camber provided for thin bituminous surface hill roads, is

Solution:

Thin bituminous surface 1÷40 = 0.025.
0.025 convert to %.
So 0.025*100 = 2.5%.

QUESTION: 4

For highways width of formation in plain area is

Solution:
QUESTION: 5

Width of formation for village roads in mountainous areas is

Solution:
QUESTION: 6

Minimum right of way required for a village road in open area is

Solution:
QUESTION: 7

Recommended right of way for highways in open areas is

Solution:
QUESTION: 8

In plains, exceptional gradient is limited to

Solution:
QUESTION: 9

In steep terrain ruling gradient is limited to

Solution:
QUESTION: 10

In geometric design of roads height of sight distance of a driven is taken as above road surface

Solution:
QUESTION: 11

For finding stopping distance of a vehicle, the height of line of sight of driver and height of line of obstacle on road are taken as_____respectively.

Solution:
QUESTION: 12

The stopping sight distance in metres for Indian highways for upward slope i is

where v = speed in kmph
t = time of perception and response
f= coefficient of friction

Solution:
QUESTION: 13

The main objective of transportation is?

Solution:

The main objective of a good transportation system is to provide safe economical, efficient transportation for the facility of passengers and the transport of goods.

QUESTION: 14

If speed of vehicle is about 100 kmph IRC recommended value of coefficient of friction is

Solution:
QUESTION: 15

To overtake a vehicle going at 40 kmph on two lane highway OSD is

Solution:
QUESTION: 16

To overtake a vehicle going at 80 kmph on a two-lane highway overtaking sight distance is

Solution:
QUESTION: 17

Sight distance at intersection should be equal to

Solution:
QUESTION: 18

Sight distance at intersection should be at least along the minor road.

Solution:
QUESTION: 19

If design speed of a main road is 100 kmph, the sight distance at intersection should be at least

Solution:
QUESTION: 20

The length of vehicle controls the design of

Solution:
QUESTION: 21

If the cross slope of terrain is 15, it is classified as

Solution:

Explanation:
upto 10% : plain
between 10% and 25%: Rolling between 25% and 60% : mountaineous more than 60% : Steep.

QUESTION: 22

If the cross slope of a terrain in 35% it is classified as

Solution:
QUESTION: 23

When a vehicle weighing W traces a horizontal curve of radius R with uniform velocity v it is
subjected to a centrifugal force

Solution:

QUESTION: 24

When a vehicle traces a horizontal curve, it is subjected to centrifugal force in direction.

Solution:
QUESTION: 25

A vehicle weighs 50 kN when empty. Its minimum velocity for skidding on a curve is v. If it is weighing 100 kN so that centroid remains at the same height when loaded, it; minimum velocity for skidding on a curve is

Solution:

Similar Content

Related tests