# Test: I.C. Engines- 1

## 25 Questions MCQ Test Mechanical Engineering SSC JE (Technical) | Test: I.C. Engines- 1

Description
Attempt Test: I.C. Engines- 1 | 25 questions in 50 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study Mechanical Engineering SSC JE (Technical) for Mechanical Engineering Exam | Download free PDF with solutions
QUESTION: 1

Solution:
QUESTION: 2

Solution:
QUESTION: 3

### In a IC engine The ratio of Indicated work done to frictional losses is 4 : 3. The mechanical efficiency of the engine is

Solution:
QUESTION: 4

Mean effective pressure multiplied by swept volume per second gives.

Solution:
QUESTION: 5

Thermal efficiency of an Diesel cycle is given by

r = Compression ratio
r = Cut off ratio

Solution:
QUESTION: 6

Morse test is conducted on.

Solution:
QUESTION: 7

In diesel engine delay period means.

Solution:
QUESTION: 8

In S.I. engines supercharging will.

Solution:
QUESTION: 9

In C.I. engines injection advance makes knocking

Solution:
QUESTION: 10

A S. I. engine working on C.N.G does not require the following part.

Solution:
QUESTION: 11

For a 6- cylinder engine for evenness of torque firing order is

Solution:
QUESTION: 12

The ctance number of a mixure containing 60% ISO octane and 40% n - heptane is .

Solution:
QUESTION: 13

With increase in temperature of intake air, I.C. engine efficiency.

Solution:
QUESTION: 14

Which of the following engines deve lops maximum brake power

Solution:
QUESTION: 15

For same compression ratio and for same heat added

Solution:
QUESTION: 16

Piston compression rings are made of which of the following

Solution:
QUESTION: 17

Knocking tendency in SI engine reduces with increase in

Solution:
QUESTION: 18

The maximum limit of air fuel ratio for petrol is

Solution:
QUESTION: 19

Knocking in C.I. engine occurs during which stage of combustion.

Solution:
QUESTION: 20

In CI engine the Air fuel mixure is

Solution:
QUESTION: 21

The area inside an indicator diagram represents

Solution:
QUESTION: 22

The relationship between swept volume (Vs) clearance volume (Vc) and compression ratio (r) is

Solution:

For calculating compression ratio you should know the swept volume and clearance volume of the engine cylinder. Then you can use the relation,

r= 1+(Vs/Vc).

Where, r- compression ratio, Vs- Swept Volume and Vc- Clearance Volume.

QUESTION: 23

Octane no. of a fuel can be increased by adding

Solution:
QUESTION: 24

Methane burns with stoichiometric quantity of a air. The air fuel ratio by weight is

Solution:
QUESTION: 25

For determining ignition quality of CI engines The reference fuel used are:

Solution: Use Code STAYHOME200 and get INR 200 additional OFF Use Coupon Code