Technical Test SSC JE: Electrical Engineering (EE)- 4


100 Questions MCQ Test Electrical Engineering SSC JE (Technical) | Technical Test SSC JE: Electrical Engineering (EE)- 4


Description
This mock test of Technical Test SSC JE: Electrical Engineering (EE)- 4 for Electrical Engineering (EE) helps you for every Electrical Engineering (EE) entrance exam. This contains 100 Multiple Choice Questions for Electrical Engineering (EE) Technical Test SSC JE: Electrical Engineering (EE)- 4 (mcq) to study with solutions a complete question bank. The solved questions answers in this Technical Test SSC JE: Electrical Engineering (EE)- 4 quiz give you a good mix of easy questions and tough questions. Electrical Engineering (EE) students definitely take this Technical Test SSC JE: Electrical Engineering (EE)- 4 exercise for a better result in the exam. You can find other Technical Test SSC JE: Electrical Engineering (EE)- 4 extra questions, long questions & short questions for Electrical Engineering (EE) on EduRev as well by searching above.
QUESTION: 1

The charge on an electron is known to be 1.6 × 10–19 coulomb. In a circuit the current flowingis 1A. How many electrons will be flowing through the circuit in a second ?

Solution:

QUESTION: 2

Pyrometer is used for measurement of

Solution:

QUESTION: 3

The voltage and current waveforms for an elements are shown in the figures

The circuit element and its value are

Solution:

QUESTION: 4

A magnetic ring has a mean circumference of 20 cm and a cross section of 20 cm2 and has 800 numbers of turns of wire. When the exciting current is 5A, the flux is 2 mWb. The relative permeability of iron is nearly

Solution:

QUESTION: 5

Random error is

Solution:

QUESTION: 6

A semiconductor device made out of a material having very high temperature coefficient of resistance is

Solution:
QUESTION: 7

One single-phase energy meter operating on 230 V and 5A for 5 hours makes 1940 revolution. Meter constant is 400 rev/kWh. The power factor of the load is

Solution:

QUESTION: 8

In a junction transistor, the collector cut-off current 'ICBO' reduces considerably by doping the

Solution:

QUESTION: 9

In a D.C. generator all of the following could be the effects of iron losses except

Solution:
QUESTION: 10

The losses occurring in a D.C. generator are given below which loss is likely to have highest proportion at rated load of the generator

Solution:
QUESTION: 11

In a D.C. generator the critical resistance can be increased by

Solution:
QUESTION: 12

A series resonant circuit has an inductive reactance of 1000W, a capacitive reactance of 1000W and a resistance of 0.1W. If resonant frequency is 10 MHz, then the bandwidth of the circuit will be

Solution:


QUESTION: 13

Consider the network given below

The time constant of the circuit is

Solution:

QUESTION: 14

Two bulbs marked 200 watt, 250 volts and 100 watt -250 volts are joined in series to 250 volts supply. Power consumed in circuits is

Solution:

QUESTION: 15

Three equal resistors connected in series across a source of emf together dissipate 10 watts of power. What would be the power dissipated in the same resistors when they are connected in parallel across the same source of emf ?

Solution:

QUESTION: 16

In a transmission system, the weight of copper used is proportional to

Solution:
QUESTION: 17

If the frequency of a transmission system is changed from 50 Hz to 100 Hz, the string efficiency will

Solution:
QUESTION: 18

A piece of silver wire has a resistance of 1W. A manganin wire has specific resistance 30 times that of silver. The resistance of a manganin wire of one fourth length and one third diameter will be

Solution:

QUESTION: 19

Wattless current is possible, only in

Solution:
QUESTION: 20

If the stator voltage and frequency of an induction motor are reduced proportionately,its

Solution:
QUESTION: 21

The efficiency and p.f. of SCIM increases in proportion to its

Solution:
QUESTION: 22

Which of the following lamp gives nearly monochromatic light ?

Solution:
QUESTION: 23

A auto transformer used with sodium vapour lamp should have

Solution:
QUESTION: 24

For supply on 25 kV, 50 Hz single phase, suitable motor for electric traction is

Solution:
QUESTION: 25

The welding transformer used in resistance welding will

Solution:
QUESTION: 26

The power factor of the load using welding transformer is usually

Solution:
QUESTION: 27

The welding load is always

Solution:
QUESTION: 28

Pump, blowers and fans are usually called for

Solution:
QUESTION: 29

In lap windings, the equalizer rings are used to save

Solution:
QUESTION: 30

A transformer is considered to have a network of series capacitance due to

Solution:
QUESTION: 31

Stator voltage control for speed control of induction motors is suitable for

Solution:
QUESTION: 32

The equivalent inductance for the following inductive circuit is

Solution:

QUESTION: 33

A particular current is made up of two components a 10A dc and a sinusoidal current of peak value of 14.14A. The average value of resultant current is

Solution:
QUESTION: 34

The unit of a thermal resistance of a semiconductor device is

Solution:
QUESTION: 35

Assertion (A) : FETs are more suitable at the input stages of millivoltmeter and CROs than
BJTs
Reason (R) : A FET has lower output impedance than a BJT

Solution:
QUESTION: 36

With 100% inductive shunt compensation, the voltage profile is flat for

Solution:
QUESTION: 37

Three phase transformers which cannot be connected in parallel are

Solution:
QUESTION: 38

In case of a 3-phase short circuit in a system, the power fed into the system is

Solution:
QUESTION: 39

The most economical limit of power factor correcting is governed by

Solution:

QUESTION: 40

As per I.E. rules the insulation resistance between conductor and earth should not be less than

Solution:

As per IE rules, insulation Resistance between earth and conductor should not exceed the 1/5000 time of the current flowing through the conductor.

That is to be measured by the ‘Megger’ instrument.

As per IE rules, 1956 insulation Resistance between earth and conductor should in range of mega Ohms.

 

IMPORTANT TO REMEMBER:-

One Mega ohm Rule for IR Value for Equipment

Based upon equipment rating:

< 1K V = 1 MΩ minimum
>1KV = 1 MΩ /1KV

Therefore, based on this analogy for Medium and High voltages there is need for Insulation –

Therefore,

Value of insulation Resistance between earth and conductor should not be less than 100 M ohm.

QUESTION: 41

Excess carriers are generated in a sample of N-type semiconductor by shining light at one end. The current flow in the sample will be made up of

Solution:
QUESTION: 42

The effective resistance between the terminals A and B in the circuit shown in the figure is

Solution:

QUESTION: 43

In the circuit of figure below, the voltage V(t) is

Solution:

QUESTION: 44

A dc shunt generator builds up to a voltage of 220 V at no load while running at its rated speed. If the speed of the generator is raised by 25% keeping the circuit conditions unaltered,then the voltage to which the machine would build up will

Solution:

QUESTION: 45

In normal dc machines operating at full load conditions the most powerful electromagnet is

Solution:

QUESTION: 46

If the secondary winding of the ideal transformer shown in the circuit of figure has 40 turns, the number of turns in the primary winding for maximum power transfer to the 2 resistor will be

Solution:

QUESTION: 47

In the circuit shown in the figure, if the ammeter indicates 1A and the voltmeter having an internal resistance of 1KW indicated 100V, then the value of R would be

Solution:

QUESTION: 48

A Galvanometer has

Solution:
QUESTION: 49

Thermal runaway is not possible in FET because as the temperature of FET increases

Solution:
QUESTION: 50

Which of the following statement is correct ?

Solution:
QUESTION: 51

In an actual transformer the iron loss remains practically constant from no load to full load because

Solution:
QUESTION: 52

A 2 pole generator with wave wound armature has 51 slots each having 24 conductors. The flux per pole is 0.01 Wb. The speed at which the generator should be run to induce the voltage of 220 should be

Solution:

QUESTION: 53

For parallel operation, the generators normally preferred are

Solution:
QUESTION: 54

Which winding on dc generators is preferred for generating large currents ?

Solution:
QUESTION: 55

The advantage of high voltage transmission is are

Solution:
QUESTION: 56

The function of steel wire in a ACSR conductor is

Solution:
QUESTION: 57

The flicker effect of fluorescent lamp is more pronounced at

Solution:
QUESTION: 58

The level of illumination on a surface least depends on

Solution:
QUESTION: 59

In resistance welding, aluminium as compared to steel, requires

Solution:
QUESTION: 60

Pole changing method of speed control is used in

Solution:
QUESTION: 61

The resistance of series RLC circuit is doubled and inductance is halved, then BW becomes

Solution:
QUESTION: 62

The input impedance of CRO is nearly

Solution:
QUESTION: 63

Manometer is used for measurement of

Solution:
QUESTION: 64

Centrifugal pumps are usually driven by

Solution:
QUESTION: 65

A 10 mF capacitor was tested by a multimeter using resistance measuring range. If the multimeter reads zero, it can be concluded that

Solution:
QUESTION: 66

Which of the following induction motors will have the least shaft diameter ?

Solution:
QUESTION: 67

A 20 kW, 4 pole, 400 V, 60 Hz, 3 phase, 1728 rpm induction motor is connected to 400V, 50 Hz supply, the motor will

Solution:
QUESTION: 68

In a circuit breaker the active recovery voltage depends upon

Solution:
QUESTION: 69

Which of the following technique/method is used for the measurement of ac high frequency voltages ?

Solution:
QUESTION: 70

Boosters are basically

Solution:
QUESTION: 71

Which of the following short circuit is the most dangerous ?

Solution:
QUESTION: 72

A capacitor start, capacitor run single phase induction motor is basically a

Solution:
QUESTION: 73

In squirrel cage induction motor, the starting current is

Solution:
QUESTION: 74

The input gate current of FET is closer to

Solution:
QUESTION: 75

The magnetising force on an iron ring is 1750 AT/m when the flux density is 1.1 T. The relative permeability of iron is

Solution:

QUESTION: 76

Millman's theorem yields

Solution:
QUESTION: 77

A 10 mH inductor carries a sinusoidal current of 1A rms at a frequency of 50 Hz. The average power dissipated by the inductor is

Solution:

QUESTION: 78

Silicon diode is less suited for low voltage rectifier operation because

Solution:
QUESTION: 79

The resistivity of a semi-conductor

Solution:

Resistivity of conductors increases with increase in temperature because rate of collisions between free electrons and ions increase with increase of temperature. However, the resistivity of semiconductors decreases with increase in temperature, because more and more covalent bonds are broken at higher temperatures.

QUESTION: 80

In case of induction motor, with increase in supply voltage, which of the following increases?

Solution:

QUESTION: 81

In case of transformers regulation varies as

Solution:
QUESTION: 82

In a transformer, with change in frequency

Solution:
QUESTION: 83

Sometimes a reactor is connected in series with a transformer to

Solution:
QUESTION: 84

Damping torque in instruments is generally not produced

Solution:
QUESTION: 85

In hot wire instruments, the sensing wire is made of

Solution:
QUESTION: 86

When a multiplier is added to an existing voltmeter for extending its range, its electromagnetic damping

Solution:
QUESTION: 87

In an insulated cable having core diameter d and overall diameter D, the ratio of maximum
to minimum dielectric stress is given by

Solution:
QUESTION: 88

When the damping force is more than the optimum, the instrument will become

Solution:
QUESTION: 89

In a moving iron type ammeter, the coil has

Solution:
QUESTION: 90

How many relays are used to detect inter phase fault of a three line system ?

Solution:
QUESTION: 91

If δ is the loss angle of the cable, its power factor is

Solution:

QUESTION: 92

The critical clearing time of a fault in power system is related to

Solution:
QUESTION: 93

The depletion layer across a p+–n junction lies

Solution:
QUESTION: 94

A combination of two diodes connected in parallel when compared to a single diode can with stand

Solution:
QUESTION: 95

Megger is a combination of

Solution:
QUESTION: 96

In a separately excited generator, field winding is excited by

Solution:
QUESTION: 97

In an RLC parallel circuit, the impedance at resonance is

Solution:

QUESTION: 98

Which one of the following theorem is a manifestation of the law of conservation of energy ?

Solution:
QUESTION: 99

Resistivity of earth increases sharply if the moisture falls below

Solution:
QUESTION: 100

Which type of drive can be used for hoisting machinery

Solution: