Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - GATE MCQ

# Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - GATE MCQ

Test Description

## 65 Questions MCQ Test - Mechanical Engineering - ME 2013 GATE Paper (Practice Test)

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) for GATE 2024 is part of GATE preparation. The Mechanical Engineering - ME 2013 GATE Paper (Practice Test) questions and answers have been prepared according to the GATE exam syllabus.The Mechanical Engineering - ME 2013 GATE Paper (Practice Test) MCQs are made for GATE 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) below.
Solutions of Mechanical Engineering - ME 2013 GATE Paper (Practice Test) questions in English are available as part of our course for GATE & Mechanical Engineering - ME 2013 GATE Paper (Practice Test) solutions in Hindi for GATE course. Download more important topics, notes, lectures and mock test series for GATE Exam by signing up for free. Attempt Mechanical Engineering - ME 2013 GATE Paper (Practice Test) | 65 questions in 180 minutes | Mock test for GATE preparation | Free important questions MCQ to study for GATE Exam | Download free PDF with solutions
 1 Crore+ students have signed up on EduRev. Have you?
Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 1

### Q. No. 1 – 5 Carry One Mark Each Complete the sentence: Universalism is to particularism as diffuseness is to ________

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 2

### Were you a bird, you ___________ in the sky.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 3

### Which one of the following options is the closest in meaning to the word given below? Nadir

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 3

Nadir in the lowest point on a curve

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 4

Choose the grammatically INCORRECT sentence:

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 5

What will be the maximum sum of 44, 42, 40, ... ?

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 5

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 6

Q. No. 6 – 10 Carry Two Marks Each

Out of all the 2-digit integers between 1 and 100, a 2-digit number has to be selected at random. What is the probability that the selected number is not divisible by 7?

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 6

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 7

A tourist covers half of his journey by train at 60 km/h, half of the remainder by bus at 30 km/h and the rest by cycle at 10 km/h. The average speed of the tourist in km/h during his entire journey is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 7

Let total distance be D

Total Time = D(1/2*60 + 1/4*30 + 1/4*10) = D/24

Average Speed = Total distance / Total time = 24

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 8

Find the sum of the expression

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 8

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 9

The current erection cost of a structure is Rs. 13,200. If the labour wages per day increase by 1/5 of the current wages and the working hours decrease by 1/24 of the current period, then the new cost of erection in Rs. is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 9

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 10

After several defeats in wars, Robert Bruce went in exile and wanted to commit suicide. Just before committing suicide, he came across a spider attempting tirelessly to have its net. Time and again the spider failed but that did not deter it to refrain from making attempts. Such attempts by the spider made Bruce curious. Thus, Bruce started observing the near-impossible goal of the spider to have the net. Ultimately, the spider succeeded in having its net despite several failures. Such act of the spider encouraged Bruce not to commit suicide. And then, Bruce went back again and won many a battle, and the rest is history.

Which one of the following assertions is best supported by the above information?

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 11

Q. No. 11 – 35 Carry One Mark Each

The partial differential equation  is a

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 12

The eigen values of symmetric matrix are all

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 13

Match the CORRECT pairs:

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 14

A rod of length L having uniform cross-sectional area A is subjected to a tensile force P as shown in the figure below. If the Young’s modulus of the material varies linearly from E1 to E2 along the length of the rod, the normal stress developed at the section-SS is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 14

Stress depends on area.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 15

The threaded bolts A and B of same material and length are subjected to identical tensile load. If the elastic strain energy stored in bolt A is 4 times that of the bolt B and the mean diameter of bolt A is 12mm, the mean diameter of bolt B in mm is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 15

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 16

A link OB is rotating with a constant angular velocity of 2 rad/s in counter clockwise direction and a block is sliding radially outward on it with an uniform velocity of 0.75 m/s with respect to the rod, as shown in the figure below. If OA = 1m, the magnitude of the absolute acceleration of the block at location A in m/s2 is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 16

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 17

For steady, fully developed flow inside a straight pipe of diameter D, neglecting gravity effects, the pressure drop Δp over a length L and the wall shear stress τw are related by

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 17

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 18

The pressure, dry bulb temperature, and relative humidity of air in a room are 1bar, 30ºC and 70% respectively. If the saturated steam pressure at 30ºC is 4.25kPa, the specific humidity of the room air in kg water vapour/kg dry air is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 18

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 19

Consider one-dimensional steady state heat conduction, without heat generation, in a plane wall; with boundary conditions as shown in the figure below. The  conductivity of the wall is given by k = k0 + bT ; where k0 and b are positive constants and T is temperature.

As x increases, the temperature gradient (dT / dx) will

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 20

In a rolling process, the state of stress of the material undergoing deformation is

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 21

Match the CORRECT pairs.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 22

A metric thread of pitch 2mm and thread angle 60º is inspected for its pitch diameter using 3-wire method. The diameter of the best size wire in mm is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 22

For 60o thread angle, best wire size  = 0.57135 x P = 1.154

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 23

Customers arrive at a ticket counter at a rate of 50 per hour and tickets are issued in the order of their arrival. The average time taken for issuing a ticket is 1min. Assuming that customer arrivals form a Poisson process and service times are exponentially distributed, the average waiting time in queue in minutes is:

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 23

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 24

In simple exponential smoothing forecasting, to give higher weightage to recent demand information, the smoothing constant must be close to

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 24

Value of α close to one have less of a smoothing effect and give greater weight to recent changes in the data.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 25

A steel bar 200 mm in diameter is turned at a feed of 0.25 mm/rev with a depth of cut of 4 mm. The rotational speed of the workpiece is 160 rpm. The material removal rate in mm3/s is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 25

f × d × v

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 26

A cube shaped casting solidifies in 5 minutes. The solidification time in minutes for a cube of the same material, which is 8 times heavier than the original casting will be

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 26

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 27

For a ductile material, toughness is a measure of

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 27

Since, toughness has ability to absorb energy up to fracture.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 28

In order to have maximum power from a Pelton turbine, the bucket speed must be

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 28

Since, velocity of bucket = 1/2 times the velocity of jet.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 29

Consider one-dimensional steady state heat conduction along x-axis (0 < x < L) , through a plane wall with the boundary surfaces (x = 0 and x = L) maintained at temperatures 0ºC and 100ºC. Heat is generated uniformly throughout the wall.

Choose the CORRECT statement.

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 30

A cylinder contains 5m3 of ideal gas at a pressure of 1 bar. This gas is compressed in a reversible isothermal process till its pressure increases to 5 bar. The work in kJ required for this process is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 30

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 31

A long thin walled cylindrical shell, closed at both ends, is subjected to an internal pressure. The ratio of the hoop stress (circumferential stress) to longitudinal stress developed in the shell is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 31

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 32

If two nodes are observed at a frequency of 1800 rpm during whirling of a simply supported long slender rotating shaft, the first critical speed of the shaft in rpm is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 32

Since it is simply supported critical speed and first frequency = fn

second frequency = 4fn, third frequency = 9fn

therefore, 9fn = 1800 (Considering two nodes between ends)

then, fn = 200

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 33

A planar closed kinematic chain is formed with rigid links PQ = 2.0m, QR = 3.0m, RS = 2.5m and SP = 2.7m with all revolute joints. The link to be fixed to obtain a double rocker (rocker-rocker) mechanism is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 33

Since for Rocker – Rocker mechanism the link opposite to smaller link must be fixed

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 34

Let X be a nominal variable with mean 1 and variance 4. The probability P (X < 0) is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 34

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 35

Choose the CORRECT set of functions, which are linearly dependent.

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 35

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 36

Q. No. 26 – 55 Carry Two Marks Each

Q. The following surface integral is to be evaluated over a sphere for the given steady velocity vector field, F = xi + yj + zk defined with respect to a Cartesian coordinate system having i, j, and k as unit base vectors.

Where S is the sphere, x2 + y2 + z2 = 1 and n is the outward unit normal vector to the sphere. The value of the surface integral is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 36

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 37

The function f(t) satisfies the differential equation  and the auxiliary conditions,
The Laplace transform of f(t) is given by

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 37

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 38

Ram and Shyam shared a secret and promised to each other that it would remain between them. Ram expressed himself in one of the following ways as given in the choices below. Identify the correct way as per standard English

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 39

Water is coming out from a tap and falls vertically downwards. At the tap opening, the stream diameter is 20mm with uniform velocity of 2 m/s. Acceleration due to gravity is 9.81 m/s2. Assuming steady, inviscid flow, constant atmospheric pressure everywhere and neglecting curvature and surface tension effects, the diameter is mm of the stream 0.5m below the tap is approximately

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 40

A steel ball of diameter 60 mm is initially in thermal equilibrium at 1030°C in a furnace. It is suddenly removed from the furnace and cooled in ambient air at 30°C , with convective heat transfer coefficient h = 20 W/m2K. The thermophysical properties of steel are: density ρ = 7800 kg /m3 , conductivity
and specific heat c = 600 J/kgK. The time required in seconds to cool the steel ball in air from 1030°C to 430°C is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 40

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 41

A flywheel connected to a punching machine has to supply energy of 400 Nm while running at a mean angular speed of 20 radians/s. If the total fluctuation of speed is not to exceed ±2%, the mass moment of inertia of the flywheel in kg − m2 is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 41

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 42

A compound gear train with gears P, Q, R and S has number of teeth 20, 40, 15 and 20, respectively. Gears Q and R are mounted on the same shaft as shown in the figure below. The diameter of the gear Q is twice that of the gear R. If the module of the gear R is 2 mm, the center distance in mm between gears P and S is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 42

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 43

A pin jointed uniform rigid rod of weight W and Length L is supported horizontally by an external force F as shown in the figure below. The force F is suddenly removed. At the instant of force removal, the magnitude of vertical reaction developed at the support is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 43

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 44

Two cutting tools are being compared for a machining operation. The tool life equations are:

Where V is the cutting speed in m/min and T is the tool life in min. The carbide toll will provide higher tool life if the cutting speed in m/min exceeds

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 44

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 45

In a CAD package, mirror image of a 2D point P(5, 10) is to be obtained about a line which passes through the origin and makes an angle of 45° counterlockwise with the X-axis. The coordinates of the transformed point will be

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 46

A linear programming problem is shown below:

It has

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 46

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 47

Cylindrical pins of  diameter are electroplated in a shop. Thickness of  the plating is 2.0 30 micron + . Neglecting gage tolerances, the size of the GO gage in mm to inspect the plated components is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 47

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 48

During the electrochemical machining (ECM) of iron (atomic weight = 56, valency  =2) at current of 1000 A with 90% current efficiency, the material removal rate was observed to be 0.26 gm/s. If Titanium (atomic weight = 48, valency=3) is machined by the ECM process at the current of 2000 A with 90% current efficiency, the expected material removal rate in gm/s will be

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 48

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 49

A single degree of freedom system having mass 1 kg and stiffness 10kN/m initially at rest is subjected to an impulse force of magnitude 5 kN for 10−4 seconds. The amplitude in mm of the resulting free vibration is

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 50

A bar is subjected to fluctuating tensile load from 20 kN to 100 kN. The material has yield strength of 240 MPa and endurance limit in reversed bending is 160 MPa. According to the Soderberg principle, the area of cross-section in mm2 of the bar for a factor of safety of 2 is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 50

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 51

A simply supported beam of length L is subjected to a varying distributed load

, where the distance x is measured from the left support. The magnitude of the vertical force in N at the left support is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 51

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 52

Two large diffuse gray parallel plates, separated by a small distance, have surface temperatures of 400 K and 300 K. If the emissivities of the surfaces are 0.8 and the Stefan-Boltzmann constant is, the net radiation heat exchange rate in kW/m2 between the two plates is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 52

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 53

A hinged gate of length 5 m, inclined at 30° with the horizontal and with water mass on its left, is shown in figure below. Density of water is 1000 kg/m2 . The minimum mass of the gate in kg per unit width (perpendicular to the plane of paper), required to keep it closed is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 53

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 54

The pressure, temperature and velocity of air flowing in a pipe are 5 bar, 500 K and 50 m/s, respectively. The specific heats of air at constant pressure and at constant volume are 1.005 kJ/kgK and 0.718 kJ/kgK, respectively. Neglect potential energy. If the pressure and temperature of the surroundings are 1 bar and 300 K, respectively, the available energy in kJ/kg of the air stream is

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 55

The probability that a student knows the correct answer to a multiple choice question is 2/3 . If the student does not know the answer, then the student guesses the answer. The probability of the guessed answer being correct is 1/4. Given that the student has answered the question correctly, the conditional probability that the student known the correct answer is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 55

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 56

The solution to the differential equation   where k is a constant, subjected to the boundary conditions u(0)=0 and u(L)=U, is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 56

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 57

The value of the definite integral

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 57

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 58

Common Data Questions: 58 & 59

A single riveted lap joint of two similar plates as shown in the figure below has the following geometrical and material details:

Width of the plate w = 200 mm, thickness of the plate t = 5 mm, number of rivets n = 3, diameter of the rivet dr = 10mm, diameter of the rivet hole dh = 11mm, allowable tensile stress of the plate σ= 200MPa, allowable shear stress of the rivet σs = 100 MPa and allowable bearing stress of the σc = 150 MPa 48.

Q. If the rivets are to be designed to avoid crushing failure, the maximum permissible load P in kN is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 58

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 59

Common Data Questions: 58 & 59

A single riveted lap joint of two similar plates as shown in the figure below has the following geometrical and material details:

Width of the plate w = 200 mm, thickness of the plate t = 5 mm, number of rivets n = 3, diameter of the rivet dr = 10mm, diameter of the rivet hole dh = 11mm, allowable tensile stress of the plate σ= 200MPa, allowable shear stress of the rivet σs = 100 MPa and allowable bearing stress of the σc = 150 MPa 48.

Q. If the plates are to be designed to avoid tearing failure, the maximum permissible load P in kN is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 59

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 60

Common Data Questions: 60 & 61

Water (specific heat, cp = 4.18 kJ / kgK ) enters a pipe at a rate of 0.01 kg/s and a temperature of 20°C . The pipe, of diameter 50 mm and length 3m, is subjected to a wall heat flux

Q. If , where x is in m and in the direction of flow (x=0 at the inlet), the bulk mean temperature of the water leaving the pipe in °C is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 60

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 61

Common Data Questions: 60 & 61

Water (specific heat, cp = 4.18 kJ / kgK ) enters a pipe at a rate of 0.01 kg/s and a temperature of 20°C . The pipe, of diameter 50 mm and length 3m, is subjected to a wall heat flux

Q. If = 5000, and the convection heat transfer coefficient at the pipe outlet is 1000W /m2K , the temperature in °C at the inner surface of the pipe at the outlet is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 61

= 5000 consant

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 62

In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendicular to the friction force acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.

Q. The orthogonal rake angle of the cutting tool in degree is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 62

As cutting f is far to F − F
Rake angle α = 0

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 63

In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendicular to the friction force acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.

Q. The normal force acting at the chip-tool interface in N is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 63

Normal force
FH cosα − Fv sinα
=1500 cos0 F sin0
=1500

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 64

In a simple Brayton cycle, the pressure ration is 8 and temperatures at the entrance of compressor and turbine are 300 K and 1400 K, respectively. Both compressor and gas turbine have isentropic efficiencies equal to 0.8. For the gas, assume a constant value of p c (specific heat at constant pressure) equal to 1 kJ/kgK and ratio of specific heats as 1.4. Neglect changes in kinetic and potential energies.

Q. The power required by the compressor in kW/kg of gas flow rate is

Detailed Solution for Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 64

Mechanical Engineering - ME 2013 GATE Paper (Practice Test) - Question 65