Disposal Of Solid Wastes


10 Questions MCQ Test Mock Test Series for Civil Engineering (CE) GATE 2020 | Disposal Of Solid Wastes


Description
This mock test of Disposal Of Solid Wastes for Civil Engineering (CE) helps you for every Civil Engineering (CE) entrance exam. This contains 10 Multiple Choice Questions for Civil Engineering (CE) Disposal Of Solid Wastes (mcq) to study with solutions a complete question bank. The solved questions answers in this Disposal Of Solid Wastes quiz give you a good mix of easy questions and tough questions. Civil Engineering (CE) students definitely take this Disposal Of Solid Wastes exercise for a better result in the exam. You can find other Disposal Of Solid Wastes extra questions, long questions & short questions for Civil Engineering (CE) on EduRev as well by searching above.
QUESTION: 1

The method of refuse disposal, involving burial in trenches, is called

Solution:

Incineration is the process of disposing of dewatered sludge by burning them in a furnace. Pulverisation is a technique of refuse disposal by grinding refuse to a lesser volume thereby changing its character.

QUESTION: 2

Which one of the following solid waste disposal methods is ecologically most acceptable?

Solution:

The leachate from sanitary landfill tend to pollute ground water. Incineration and pyrolysis release air pollutants. Composting does not have any harmful effect.

QUESTION: 3

Sewage sickness occurs when

Solution:

When sewage is applied continuously on a piece of land, the soil pores or voids may get filled up and clogged with sewage matter retained in them. Thus free circulation of air will be prevented and anaerobic conditions will develop within the pores. Sewage sickness is the condition when soil pores get filled up and clogged with sewage matter due to continuous application of waste water effluents. This develops anaerobic conditions and foui gases like methane, carbon-dioxide and hydrogen sulphide are evolved.
In order to prevent sewage sickness:
(i) Sewage should be given primary treatment
(ii) The soil chosen for effluent irrigation/sewage farming should be sandy or loamy.
(iii) A proper under drainage system (open jointed drains) should be designed.
(iv) Land should be given rest for some time and ploughed thoroughly.
(v) Rotation of crops to be followed.
(vi) Shallow depths of water should be applied.

QUESTION: 4

Which of the following materials are used as landfill sealants for the control of gas and leachate movements?
1. Lime
2. Sand
3. Bentonite
4. Fly ash
5. Butyl rubber
Select the correct answer using the codes given below:

Solution:

Sealants are used of control for gas and leachate movement


The sealant material should be more impermeable than the soil. So sand will not be a suitable material. Flyash and lime themselves produce pollutants which dissolve in water. Therefore these materials cannot be used as sealants.

QUESTION: 5

Which one of the following methods can be employed for plastic and rubber waste disposal?

Solution:
QUESTION: 6

Bangalore method and Indore method of disposing solid wastes are

Solution:
QUESTION: 7

Which one of the following statements explains the term pyrolysis?

Solution:

Upon heating in a oxygen free atmosphere during pyrolysis, most organic substances can be split through a combination of thermal cracking and condensation reactions in gaseous liquid and solid fractions.

QUESTION: 8

The term 'biological magnification’ indicates which one of the following?

Solution:
QUESTION: 9

Allowable disposable rate of application of sludge on land is determined by

Solution:

Design loading rates for land application of biosolids can be limited by heavy metals or nitrogen. The annual loading rate is usually limited by nitrogen loading rate. The long-term loading rate is limited by heavy metals.

QUESTION: 10

What are the gases produced by landfills primarily comprised of?

Solution:

Gases found in landfills include air, ammonia, carbon dioxide, carbon monoxide, hydrogen, hydrogen sulphide, methane, nitrogen and oxygen. Carbon dioxide and methane are the principal gases produced from the anaerobic decomposition of the organic solid waste components.

Similar Content

Related tests