Description

This mock test of First Order RL & RC Circuits - 1 for Electrical Engineering (EE) helps you for every Electrical Engineering (EE) entrance exam.
This contains 10 Multiple Choice Questions for Electrical Engineering (EE) First Order RL & RC Circuits - 1 (mcq) to study with solutions a complete question bank.
The solved questions answers in this First Order RL & RC Circuits - 1 quiz give you a good mix of easy questions and tough questions. Electrical Engineering (EE)
students definitely take this First Order RL & RC Circuits - 1 exercise for a better result in the exam. You can find other First Order RL & RC Circuits - 1 extra questions,
long questions & short questions for Electrical Engineering (EE) on EduRev as well by searching above.

QUESTION: 1

The poles of the impedance Z(s) for the network shown in figure below will be real and coincident if

Solution:

The impedance Z(s) of the given network is

The pofes are at

Thus, the poles will be coincidence if

QUESTION: 2

In the complex frequency S= σ + jω, ω has the unit of radian/sec and σ has the unit of

Solution:

QUESTION: 3

A system is described by the transfer function The value of its step response at a very large time will be close to

Solution:

QUESTION: 4

At a certain current, the energy stored in iron cored coil is 1000 J and its copper loss is 2000 W. The time constant (in second) of the coil is

Solution:

QUESTION: 5

A ramp voltage v_{i}(t) = 100t V is applied to a differentiator circuit with R = 5 kΩ and C=4μF.The maximum output voltage is

Solution:

Maximum output voltage of RC differentiator circuit =

QUESTION: 6

The Laplace transform of the waveform below is

Solution:

The given waveform can be expressed as

v(t) = u ( t - 2) - u ( t - 3) + u ( t - 6) - u ( t - 7)

Taking Laplace transform,

QUESTION: 7

The initial and final values of are given by

Solution:

QUESTION: 8

The Laplace transform of the ramp function shown below is

Solution:

The equation of the given ramp function is

QUESTION: 9

The poles and zeros of the transfer function for the circuit shown below are located at

Solution:

The given circuit can be redrawn as shown below.

Hence, poles are at:

QUESTION: 10

A capacitor of 0.5 F is initially charged to 1 volt and is subjected to discharge at t = 0 across a LR series circuit where 1 = 1 H; R = 2 Ω. The current i(t) for t> 0 is

Solution:

In Laplace domain, the given circuit can be drawn as shown below.

### PPT: RC - RL Circuits

Doc | 57 Pages

### RC and RL Driving Point Synthesis - Electrical Engineering

Video | 50:17 min

### RC & RL One-port Synthesis (Contd.) - Electrical Engineering

Video | 53:02 min

### Lecture 1 - First Order Differential Equations

Doc | 46 Pages

- First Order RL & RC Circuits - 1
Test | 10 questions | 30 min

- First Order RL & RC Circuits - 2
Test | 15 questions | 45 min

- Second Order RLC Circuits - 1
Test | 10 questions | 30 min

- Propositional & First Order Logic MCQ - 1
Test | 20 questions | 60 min

- Test: Zeroth Order & First Order Reactions
Test | 30 questions | 45 min