Description

This mock test of Fractional KW Motors of Electrical Machines - 1 for Electrical Engineering (EE) helps you for every Electrical Engineering (EE) entrance exam.
This contains 10 Multiple Choice Questions for Electrical Engineering (EE) Fractional KW Motors of Electrical Machines - 1 (mcq) to study with solutions a complete question bank.
The solved questions answers in this Fractional KW Motors of Electrical Machines - 1 quiz give you a good mix of easy questions and tough questions. Electrical Engineering (EE)
students definitely take this Fractional KW Motors of Electrical Machines - 1 exercise for a better result in the exam. You can find other Fractional KW Motors of Electrical Machines - 1 extra questions,
long questions & short questions for Electrical Engineering (EE) on EduRev as well by searching above.

QUESTION: 1

A 125 W, 4-pole, 110 V, 50 Hz single phase induction motor delivers rated output at a slip of 6%. The total copper loss at full load is 25 Watts. Rotational loss may be assumed to be 25 Watts. Neglecting stator copper loss, the full-load efficiency of the motor would be:

Solution:

Total copper loss; P_{cu} = 25 Watt

∴ Input power to motor,

∴ Efficiency of motor,

QUESTION: 2

The stepping angle for a 3 - stack, 16-tooth variable reluctance motor is:

Solution:

Number of stacks or phases, n =3

Number of teeth or poles, P= 16

∴ Stepping angle,

QUESTION: 3

Consider the following statements related to an universal motor:

1. An universal motor runs on d.c. as well as on a.c.

2. No extra winding is required in a universal motor for ac operation.

3. The direction of rotation of universal motor can be reversed by reversing either the field or armature leads, but not both.

4. Universal motors are designed for operation at low speeds (less than 3500 rpm).

Of these, the correct statements are:

Solution:

⇒ The compensating winding is required in an universal motor for ac operation to neutralize reactance voltage.

⇒ Universal motors are designed for operation at high speeds (> 3500 rpm).

QUESTION: 4

An 8-pole, 50 Hz, single phase induction motor is running at 690 rpm. It’s slip w.r.t. backward and forward fields respectively are:

Solution:

QUESTION: 5

Single phase ac motors are classified on the basis of

Solution:

QUESTION: 6

In an induction motor

Solution:

QUESTION: 7

The torqued eveloped by a single phase induction motor drops to zero at

Solution:

From above T-ω characteristic, T= 0 at speed = 0 and slightly below N_{s}.

QUESTION: 8

In a single phase induction motor

Solution:

QUESTION: 9

In a comparative study of the torque-slip characteristic of a balanced poly-phase induction motor and that of a single phase induction motor, it is found that for zero slip

Solution:

QUESTION: 10

Double revolving field theory is based on the idea that pulsating field produced in single phase motors can be resolved into two components of ______ its amplitude and rotating in______ direction with synchronous sped .

Solution:

### Synchronous Machines 1, Machines, Electrical Engineering, GATE

Video | 42:20 min

### Induction Machines 1, Machines, Electrical Engineering, GATE

Video | 43:03 min

### DC Machines 1, Machines, Electrical Engineering, GATE

Video | 40:34 min

- Fractional KW Motors of Electrical Machines - 1
Test | 10 questions | 30 min

- Fractional KW Motors of Electrical Machines - 2
Test | 20 questions | 60 min

- Electrical Machines - 1 MCQ
Test | 20 questions | 12 min

- Electrical Machines - 1 MCQ
Test | 20 questions | 12 min

- Test: Electrical Machines- 1
Test | 10 questions | 30 min