Description

This mock test of Power System 4 for Electrical Engineering (EE) helps you for every Electrical Engineering (EE) entrance exam.
This contains 10 Multiple Choice Questions for Electrical Engineering (EE) Power System 4 (mcq) to study with solutions a complete question bank.
The solved questions answers in this Power System 4 quiz give you a good mix of easy questions and tough questions. Electrical Engineering (EE)
students definitely take this Power System 4 exercise for a better result in the exam. You can find other Power System 4 extra questions,
long questions & short questions for Electrical Engineering (EE) on EduRev as well by searching above.

QUESTION: 1

Consider the following statements:

The VAR injection in a power system is obtained by:

1. Tap changing transformers

2. Synchronous condensers

3. Capacitor and inductor banks

4. Inductor banks

Which of the following statements given above are correct?

Solution:

The purpose of a tap changer is to regulate the output voltage of a transformer. It does this by altering the number of turns in one winding and thereby changing the turn’s ratio of the transformer.

Synchronous condensers and capacitor banks are used to inject leading VAR into system where as inductor banks are used to inject lagging VAR into system.

*Answer can only contain numeric values

QUESTION: 2

An induction motor operating at 0.8 pf lag consuming 500 kW. A zero real power consuming synchronous motors is connected across the induction motor raise the power factor to unity. The reactive power drawn by synchronous motor is___ (kVAR)

Solution:

P = 500 kW, Power factor = 0.8

KVA = 500/0.8 = 625 KVA

Reactive power drawn = 625 × 0.6 = 375 kVAR

To rise the power factor to unity, the total kVAR drawn by induction motor should be supplied by synchronous motor. KVAR drawn by synchronous motor is 375 kVAR.

QUESTION: 3

A 10 kW induction motor initially operating on a power factor of 0.5 lagging. If power factor is improved to 0.866 lagging than what is the value of kVAr raised

Solution:

Raised KV Ar = 10(tan60^{0} − tan30^{0}) =

*Answer can only contain numeric values

QUESTION: 4

Shunt capacitor are used to raise the power factor of the load of 150 kW from 0.75 lag to unity, the supply being 3 – phase at 11 kV. In star bank the capacitance will be – (in μF)

Solution:

KV AR = P tan ϕ

= 150 × 10^{3} × 0.88 = 132.287 × 10^{3}

QUESTION: 5

At an Industrial substation with a 4 MW load a capacitor of 2.5 MVAR is installed to maintain the load power factor at 0.97 lag. If the capacitor goes out of service, the load power factor becomes –

Solution:

P_{L} = 4MW

Q_{C} = 2.5MV AR

Pf = 0.97 lag

⇒ Power factor =cosϕ=0.75lag

*Answer can only contain numeric values

QUESTION: 6

A 270 KV transmission line has the following line constants A = 0.85∠5° ; B = 200∠75°. What is the power that can be received if the voltage profile at each end is maintained at 270 KV (in MW) –

Solution:

Given |V_{S}|= |V_{R}| = 270 KV, α = 5°, β = 75°

since the power is received at unity power factor Q_{R} = 0

⇒ δ = 22°

Power received P_{R
}

= 219.6 – 105.96 = 113.64 MW

*Answer can only contain numeric values

QUESTION: 7

A single phase 50 Hz motor takes 20 A at 0.75 power factor lagging from a 220 V sinusoidal supply. The capacitance required to be connected in parallel to raise the power factor to 0.9 lagging is ______ (in μF)

Solution:

I_{1} = 20A, f = 50 Hz

cosϕ_{1 }= 0.75 ⇒ ϕ_{1} = 41.41^{∘} ⇒ tanϕ_{1} = 0.88

cosϕ_{2} = 0.9 ⇒ ϕ_{2} = 25.84^{∘} ⇒ tanϕ_{2} = 0.48

I_{c} = I_{1} cosϕ_{1} (tanϕ_{1} − tanϕ_{2})

= (20) (0.75) (0.88 – 0.48) = 6 A

QUESTION: 8

A single – phase inductive load is drawing 10 MW at 0.6 power factor lagging. A capacitor is added in parallel across the load to improve the power factor to 0.85. What is the reactive power required for the capacitor?

Solution:

Initially when the real power is 10 MW and power factor is 0.6, the reactive power is

Now when the capacitor is added, improved power factor is

cos^{-1} 0.85 = 31.79°

Reactive power is 10 tan 31.79° = 6.2 VAR

Reactive power needed for the capacitor

= Q_{c} = - (13.33 – 6.2)

= - 7.13 MVAR

*Answer can only contain numeric values

QUESTION: 9

A single phase motor connected to 400V, 50Hz supply takes 31.7 A at a power factor of 0.7 lagging. Calculate the capacitance (in μF) required in parallel with the motor to raise the power factor to 0.9 lagging.

Solution:

Active component of I_{M} = I_{M} cosϕ_{M} = 31.7 × 0.7 = 22.19 A

Active component of I = I cosϕ = I × 0.9 = 0.9I A

These components are represented by OA

0.9I = 22.19

Reactive component of I_{M} = I_{M} sinϕ_{M} =

Reactive component of I = I sinϕ =

Now, I_{C} = Reactive component of I_{M} – Reactive component of I

= 22.63 – 10.74 = 11.88 A

⇒ 11.88 = 400 × 2π × 50 × c

⇒ c = 94.58 μF

QUESTION: 10

A supply system feeds the following loads

(i) A lighting load of 500 kW

(ii) A load of 400 kW at a p.f. 0.707 lagging

(iii) A load of 800 kW at a p.f. 0.8 leading

(iv) A load of 500 kW at a p.f. 0.6 lagging

(v) A synchronous motor driving a 540 kW d.c. generator and having an overall efficiency of 90%

Calculate the power factor of the synchronous motor so that station power factor may become unity.

Solution:

(i) The light load works at unity power factor.

P_{1} = 500 kW, Q_{1} = 0 KVAR

(ii) P_{2} = 400 kW, cosϕ_{2} = 0.707 lagging

Q_{2} = P_{2} tanϕ_{2} = 400 × tan cos^{-1} (0.707) = 400 KVAR (lagging)

(iii) P_{3} = 800 kW, cosϕ_{3} = 0.8 leadingQ_{3} = P_{3} tanϕ_{3} = 800 × tan cos^{-1}(0.8) = 600 KVAR (leading)

(iv) P_{4} = 500 kW, cosϕ_{4} = 0.6 lagging

Q_{4} = P_{4} tanϕ_{4} = 500 × tan cos^{-1}(0.6) = 666.67 KVAR (lagging)

Leading KVAR to be taken by synchronous motor

Q_{5} = Q_{4} + Q_{2} – Q_{3}

Q_{5} = 400 + 666.67 – 600 = 466.66 KVAR

Cosϕ_{5} = 0.789 leading

### Introduction Power System - Power System, GATE

Doc | 27 Pages

### Power System stability - Power System, GATE

Doc | 4 Pages

### Power System Restoration

Doc | 9 Pages

### Power System State Estimation

Doc | 4 Pages

- Power System 4
Test | 10 questions | 30 min

- Test: Power System (Level- 4)- 1
Test | 25 questions | 50 min

- Test: Power System (Level- 4)- 2
Test | 25 questions | 50 min

- Power System 7
Test | 10 questions | 30 min

- Power System 1
Test | 10 questions | 30 min