Q. No. 1 – 5 Carry One Mark Each
Choose the most appropriate phrase from the options given below to complete the following sentence.
India is a postcolonial country because
Who ___________ was coming to see us this evening?
Match the columns.
What is the average of all multiples of 10 from 2 to 198?
The value of
Q.No. 6 – 10 Carry Two Marks Each
The old city of Koenigsberg, which had a German majority population before World War 2, is now called Kaliningrad. After the events of the war, Kaliningrad is now a Russian territory and has a predominantly Russian population. It is bordered by the Baltic Sea on the north and the countries of Poland to the south and west and Lithuania to the east respectively. Which of the statements below can be inferred from this passage?
The number of people diagnosed with dengue fever (contracted from the bite of a mosquito) in north India is twice the number diagnosed last year. Municipal authorities have concluded that measures to control the mosquito population have failed in this region.
Which one of the following statements, if true, does not contradict this conclusion?
If x is real and then possible values of include
The ratio of male to female students in a college for five years is plotted in the following line graph. If the number of female students doubled in 2009, by what percent did the number of male students increase in 2009?
At what time between 6 a.m. and 7 a.m will the minute hand and hour hand of a clock make an angle closest to 60°?
Q.No. 11 – 35 Carry One Mark Each
Which one of the following statements is true for all real symmetric matrices?
Eigen values of a real symmetric matrix are all real
Consider a dice with the property that the probability of a face with n dots showing up is proportional to n. The probability of the face with three dots showing up is_________.
Maximum of the real valued function f(x)= (x −1)^{2/3} occurs at x equal to
All the values of the multivalued complex function 1^{i}, where i= √1 , are
Consider the differential equation Which of the following is a solution to this differential equation for x > 0?
Two identical coupled inductors are connected in series. The measured inductances for the two possible series connections are 380μH and 240μH . Their mutual inductance in μH is ________
The switch SW shown in the circuit is kept at position ‘1’ for a long duration. At t = 0+, the switch is moved to position ‘2’ Assuming V_{02} > V_{01} , the voltage V_{c} (t) across capacitor is
A parallel plate capacitor consisting two dielectric materials is shown in the figure. The middle dielectric slab is place symmetrically with respect to the plates.
If the potential difference between one of the plates and the nearest surface of dielectric interface is 2Volts, then the ratio is
Consider an LTI system with transfer function If the input to the system is cos(3t) and the steady state output is Asin(3t + α), then the value of A is
Consider an LTI system with impulse response h(t) = e^{}^{5t} u (t). If the output of the system is then the input, x(t), is given by
Assuming an ideal transformer,. The Thevenin’s equivalent voltage and impedance as seen from the terminals x and y for the circuit in figure are
A single phase, 50kVA, 1000V/100V two winding transformer is connected as an autotransformer as shown in the figure. The kVA rating of the autotransformer is
A threephase, 4pole, self excited induction generator is feeding power to a load at a frequency f_{1}. If the load is partially removed, the frequency becomes f_{2}. If the speed of the generator is maintained at 1500 rpm in both the cases, then
A single phase induction motor draws 12 mW power at 0.6 lagging power. A capacitor is connected in parallel to the motor to improve the power factor of the combination of motor and capacitor to 0.8 lagging. Assuming that the real and reactive power drawn by the motor remains same as before, the reactive power delivered by the capacitor in MVAR is ____________.
A three phase starconnected load is drawing power at a voltage of 0.9 pu and 0.8 power factor lagging. The three phase base power and base current are 100MVA and 437.38A respectively. The lineto line load voltage in kV is ___________.
Shunt reactors are sometimes used in high voltage transmission system to
The closedloop transfer function of a system is The steady state error due to unit step input is ________.
Steady state error for Type1 for unit step input is 0.
The state transition matrix for the system
The sawtooth voltage wave form shown in the figure is fed to a moving iron voltmeter. Its reading would be close to ______________
Moving iron meter reads RMS value only RMS value of sawtooth waveform is
While measuring power of a threephase balanced load by the twowattmeter method, the readings are 100W and 250 W. The power factor of the load is ______________.
Which of the following is an invalid state in an 8421. Binary Coded Decimal counter
In binary coded decimal (BCD) counter the valid states are from 0 to 9 only in binary system 0000 to 1001 only. So, 1100 in decimal it is 12 which is invalid state in BCD counter.
The transistor in the given circuit should always be in active region. Take V_{CE(sat)} = 0.2V. V_{EE} = 0.7V. The maximum value of RC in which can be used is __________.
A sinusoidal ac source in the figure has an rms value of Considering all possible values of RL, the minimum value of RS in W to avoid burnout of the Zener diode is ________.
A stepup chopper is used to feed a load at 400 V dc from a 250 V dc source. The inductor current is continuous. If the ‘off’ time of the switch is 20μs, the switching frequency of the chopper is kHz is __________.
In a constant V/f control of induction motor, the ratio V/f is maintained constant from 0 to base frequency, where V is the voltage applied to the motor at fundamental frequency f. Which of the following statements relating to low frequency operation of the motor is TRUE?
During constant V/f control, at low frequency, the voltage also applied to the induction motor is low. Hence the stator flux also decreases from its rated value.
Q.No. 36 – 65 Carry Two Marks Each
To evaluate the double integral we make the substitution and v = y/2 . The integral will reduce to
Let X be a random variable with probability density function
The probability P(0.5<x<5) is
The minimum value of the function in the interval [3. 3] is
Assuming the diodes to be ideal in the figure, for the output to be clipped, the input voltage v_{i} must be outside the range
The voltage across the capacitor, as sown in the figure, is expressed as
The value of A_{1} and A_{2} respectively, are
The total power dissipated in the circuit, show in the figure, is 1kW.
The voltmeter, across the load, reads 200 V. The value of X_{L} is _________.
The magnitude of magnetic flux density at a point having normal distance d meters from an infinitely extended wire carrying current of l A is μ_{0}I/2nd (in SI units). An infinitely extended wire is laid along the xaxis and is carrying current of 4A in the +ve x direction. Another infinitely extended wire is laid along the yaxis and is carrying 2A current in the +ve y direction μ_{0} is permeability of free space Assume to be unit vectors along x, y and z axes respectively.
Assuming right handed coordinate system, magnetic field intensity, at coordinate (2,1,0) will be
A discrete system is represented by the difference equation
It has initial condition The pole location of the system for a = 1, are
An input signal x(t) = 2 + 5sin(100πt) is sampled with a sampling frequency of 400 Hz and applied to the system whose transfer function is represented by
where, N represents the number of samples per cycle. The output y(n) of the system under steady state is
A 10 kHz evensymmetric square wave is passed through a bandpass filter with centre frequency at 30 kHz and 3 dB passband of 6 kHz. The filter output is
10 KHz even symmetric square wave have frequency component present
10KHz, 30KHz, 50KHz, 70KHz
[only odd harmonics due to half wave symmetry]
Since bandpass filter is contered at 30KHz, 30KHz component will pass through ⇒ filter output is nearly perfect cosine wave at 10 KHz
Cosine in due to reason that signal in even signal.
A 250 V dc shunt machine has armature circuit resistance of 0.6 and field circuit resistance of125 . The machine is connected to 250 V supply mains. The motor is operated as a generator and then as a motor separately. The line current of the machine in both the cases is 50 A. The ratio of the speed as a generator to the speed as a motor is ____________.
A threephase slipring induction motor, provided with a commutator winding, is shown in the figure. The motor rotates in clockwise direction when the rotor windings are closed.
If the rotor winding is open circuited and the system is made to run at rotational speed f_{r} with the help of primemover in anticlockwise direction, then the frequency of voltage across slip rings is f_{1} and frequency of voltage across commutator brushes is f_{2}. The values of f_{1} and f_{2} respectively are
Whenever the Rotor winding is open circuited and rotating in anticlockwise direction then the frequency of voltage across slip rings is
At the same time frequency of voltage across commutator brushes if
A 20pole alternator is having 180 identical stator slots with 6 conductors in each slot. All the coils of a phase are in series. If the coils are connected to realize singlephase winding, the generated voltage is V_{1}. If the coils are reconnected to realize threephase starconnected winding, the generated phase voltage is V_{2}. Assuming full pitch, singlelayer winding, the ratio V_{1}/V_{2} is
For a single phase, two winding transformer, the supply frequency and voltage are both increased by 10%. The percentage changes in the hysteresis loss and eddy current loss, respectively, are
A synchronous generator is connected to an infinite bus with excitation voltage Ef = 1.3 pu. The generator has a synchronous reactance of 1.1 pu and is delivering real power (P) of 0.6 pu to the bus. Assume the infinite bus voltage to be 1.0 pu. Neglect stator resistance. The reactive power (Q) in pu supplied by the generator to the bus under this condition is _________.
There are two generators in a power system. Noload frequencies of the generators are 51.5 Hz and 51Hz, respectively, and both are having droop constant of 1 Hz/MW. Total load in the system is 2.5 MW. Assuming that the generators are operating under their respective droop characteristics, the frequency of the power system in Hz in the steady state is __________.
Given, two generators in a power system has no load frequency of 51.5 & 51 Hz.
The horizontally placed conductors of a single phase line operating at 50 Hz are havingoutside diameter of 1.6 cm, and the spacing between centers of the conductors is 6 m. The permittivity of free space is 8.854×10^{−12 }. The capacitance to ground per kilometer of each line is
A three phase, 100 MVA, 25 kV generator has solidly grounded neutral. The positive, negative, and the zero sequence reactances of the generator are 0.2 pu, 0.2 pu, and 0.05 pu, respectively, at the machine base quantities. If a bolted single phase to ground fault occurs at the terminal of the unloaded generator, the fault current in amperes immediately after the fault is _________.
A system with the open loop transfer function: is connected in a negative feedback configuration with a feedback gain of unity. For the closed loop system to be marginally stable, the value of K is ______
For the transfer function
The values of the constant gain term and the highest corner frequency of the Bode plot respectively are
The second order dynamic system has the matrices P, Q and R as follows:
The system has the following controllability and observability properties:
Suppose that resistors R_{1 }and R_{2} are connected in parallel to give an equivalent resistor R. If resistors R_{1} and R_{2} have tolerance of 1% each., the equivalent resistor R for resistors R_{1} = 300 and R_{2} = 200 will have tolerance of
Two ammeters X and Y have resistances of 1.2 and 1.5 respectively and they give full scale deflection with 150 mA and 250 mA respectively. The ranges have been extended by connecting shunts so as to give full scale deflection with 15 A. The ammeters along with shunts are connected in parallel and then placed in a circuit in which the total current flowing is 15A. The current in amperes indicated in ammeter X is __________.
X and Y ammeters are connected in parallel
Shunt Registration of X and Y meters:
An oscillator circuit using ideal opamp and diodes is shown in the figure
The time duration for +ve part of the cycle is Δt_{1 }and forve part is Δt_{2} .The value of will be___________.
The SOP (sum of products) form of a Boolean function is , where inputs are A,B,C,D (A is MSB, and D is LSB). The equivalent minimized expression of the function is
The equivalent minimized expression of this function is =
A JK flip flop can be implemented by T flipflops. Identify the correct implementation.
Analysis:
If you will observe the combinational circuit output expression which is the input for T flip
flop is not matching directly, so you should go through the option. If you will solve the
combinational circuit of option (B) then
Now, according to consensus theorem JK will become redundant term, so it should be
eliminated.
Hence, which in matching with our desired result and option(B) is correct
answer.
In an 8085 microprocessor, the following program is executed
At the end of program, register A contains
A fully controlled converter bridge feeds a highly inductive load with ripple free load current. The input supply (v_{s}) to the bridge is a sinusoidal source. Triggering angle of the bridge converter is α = 30°. The input power factor of the bridge is_________.
For fully controlled converter bridge
A singlephase SCR based ac regulator is feeding power to a load consisting of 5 resistance and 16 mH inductance. The input supply is 230 V, 50 Hz ac. The maximum firing angle at which the voltage across the device becomes zero all throughout and the rms value of current through SCR, under this operating condition, are
V_{s }= 230V, 50Hz
R= 5 , L=16mH
The maximum firing angle at which the volt across device becomes zero is the angle at
which device trigger i.e. minimum firing angle to converter.
The current flowing SCR is max at their angle ie. when
The SCR in the circuit shown has a latching current of 40 mA. A gate pulse of 50 μs is applied to the SCR. The maximum value of R in to ensure successful firing of the SCR is _________.
Use Code STAYHOME200 and get INR 200 additional OFF

Use Coupon Code 








