Oxygen diffuses through a stagnant layer of air, 1mm thick, ambient temperature 28°C and 1atm total pressure. The partial pressure of oxygen on two sides of layer is P1=0.9atm and P2=0.1atm respectively. Calculate the value of Molar flux (in mol/m2.s) with respect to an observer moving with molar average velocity. Calculate this value at the end of the path where P2=0.1atm. Use R=8.205*10-5m3atmK-1mol-1.
In order to prepare Lithium nitride, air is passed gently over a reactor. Suppose that Nitrogen diffuse to a length 5cm before getting reacted with Lithium. Nitrogen reacts with lithium quickly so that partial pressure of Nitrogen at that point is 0. Reactor is a cylinder of length 10cm and diameter 2cm. Assume air to be a mixture of Nitrogen and Oxygen only. The temperature is 298K and total pressure 1atm. Diffusivity of N2 in O2 is 2*10-5m2/s. Calculate the Molar flux (mol/m2.s) of N2 at a distance of 2.5cm from the top with respect to an observer moving with twice the mass average velocity a direction towards the liquid surface. (R=8.205*10-5m3atmK-1mol-1). Assume z=0 at the top of the reactor.
1 Crore+ students have signed up on EduRev. Have you? Download the App |
A binary liquid mixture is separated by distillation process. The more volatile A vaporizes while less volatile B gets transported in opposite direction. Latent heat of vaporization of A and B is 0.5unit and 1unit respectively. What will be the relation between molar flux of A and B
In an accident a container containing ethanol(s.g 0.789) falls down in a room of dimension 1*1*2(all in m). Ethanol forms a layer of 2mm. Ethanol vaporizes and diffuses through a stagnant film of air of thickness 2.5mm. What will be the time required for the water layer to disappear completely. The diffusivity of ethanol in air is 2.567*10-5 m2/s. the total pressure is 1.013 bar and the pressure of ethanol in bulk air is 0.02244 bar and at the ethanol-air interface is 0.02718bar. The temperature is 25.2°C.
In the previous question if the floor has micro pores and water penetrates the floor at a constant rate of 0.1kg/m2h, what will be the time required for the water layer to disappear?
29 videos|45 docs|44 tests
|