Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs
Created by: Gate FundaMechanical Engineering Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs
Course Speciality
- Multiple tests for each topic, chapter and subject to eliminate weakness till the last level
- Multiple Complete Tests to sharpen your strategy before the final Exam
- See where you stand in the country for each test by checking your rank after every attempt
- Online Virtual Calculator available with each test
- Multiple Complete Tests to sharpen your strategy before the final Exam
- See where you stand in the country for each test by checking your rank after every attempt
- Online Virtual Calculator available with each test
Course Description by EduRev Robots
Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs is created by Mechanical Engineering teachers & experts for students preparing
for Mechanical Engineering syllabus. Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs will help everyone preparing for Mechanical Engineering syllabus with already 6142 students
enrolled. Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs is the best book for Mechanical Engineering. You can download Free Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs pdf from this course as well.
This also contains Mechanical Engineering slides including Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs ppt.
Mechanical Engineering 6142 for Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs syllabus are also available any Mechanical Engineering
entrance exam. With Mechanical Engineering exam 2019 coming close, we have covered Mechanical Engineering exam 2018, 2017 & 2016 as well to
get you a perfect result for Mechanical Engineering. This is the best Topicwise Question Bank for GATE Mechanical Engineering | Notes, Videos, MCQs & PPTs e-book even including all Mechanical Engineering sample
papers and study material from the best teachers and experts from all over the country. All Mechanical Engineering notifications
will be updated in this and you can apply for any Mechanical Engineering form after this and expect a great result after studying from
this course!
Course content
Topicwise Question Bank for GATE Mechanical Engineering
Fluid Mechanics12 videos | 27 tests
- Properties Of Fluids - 1AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Fluids - 2AttemptTotal Questions: 10 | Duration: 30 min
- Pressure & Its Measurement - 1AttemptTotal Questions: 10 | Duration: 30 min
- Pressure & Its Measurement - 2AttemptTotal Questions: 10 | Duration: 30 min
- Centrifugal Pump (GATE Previous Year Question with Solution), Mechanical Engineering, GATEWatchDuration: 10:20 min
- Hydrostatic Forces On SurfacesAttemptTotal Questions: 10 | Duration: 30 min
- Buoyancy And Floatation - 1AttemptTotal Questions: 10 | Duration: 30 min
- Buoyancy And Floattion - 2AttemptTotal Questions: 10 | Duration: 30 min
- Dynamic Of Fluid Flow - 1AttemptTotal Questions: 10 | Duration: 30 min
- Dynamic Of Fluid Flow - 2AttemptTotal Questions: 10 | Duration: 30 min
- Kinematics Of Flow And Ideal Flow - 1AttemptTotal Questions: 10 | Duration: 30 min
- Kinematics Of Flow And Ideal Flow - 2AttemptTotal Questions: 10 | Duration: 30 min
- Flow Over Notches & WeirsAttemptTotal Questions: 10 | Duration: 30 min
- Viscous Flow - 1AttemptTotal Questions: 10 | Duration: 30 min
- Viscous Flow - 2AttemptTotal Questions: 10 | Duration: 30 min
- Turbulent Flow - 1AttemptTotal Questions: 10 | Duration: 30 min
- Turbulent Flow - 2AttemptTotal Questions: 9 | Duration: 30 min
- Flow Through Pipes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Flow Through Pipes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Boundary Layer Theory - 1AttemptTotal Questions: 10 | Duration: 30 min
- Boundary Layer Theory - 2AttemptTotal Questions: 10 | Duration: 30 min
- Flow In Open Channel - 1AttemptTotal Questions: 10 | Duration: 30 min
- Flow In Open Channel - 2AttemptTotal Questions: 9 | Duration: 30 min
- Dimensional And Model Analysis - 1AttemptTotal Questions: 10 | Duration: 30 min
- Dimensional And Model Analysis - 2AttemptTotal Questions: 10 | Duration: 30 min
- Forces On Submerged BodiesAttemptTotal Questions: 10 | Duration: 30 min
- Flow Of Compressible Fluids - 1AttemptTotal Questions: 10 | Duration: 30 min
- Flow Of Compressible Fluids - 2AttemptTotal Questions: 10 | Duration: 30 min
- Turbine Numericals (GATE Previous Year Question with Solution), Mechanical Engineering, GATEWatchDuration: 10:04 min
- Maximum Discharge (GATE Previous Year Question with Solution), Mechanical Engineering, GATEWatchDuration: 10:17 min
- Venturi Meter Numericals (GATE Previous Year Questions with Solution), Mechanical Engineering, GATEWatchDuration: 10:15 min
- Finding Head Loss Using Bernoulli's Equation (GATE Previous Year Question), Mechanical Engineering, ...WatchDuration: 10:11 min
- Derivation Continuity Equation for Cartesian Coordinates, Fluid Mechanics, Mechanical EngineeringWatchDuration: 10:08 min
- Continuity Equation for Cylindrical Coordinates, Fluid Mechanics, Mechanical Engineering, GATEWatchDuration: 11:58 min
- Head Loss Because of Friction Fluid Mechanics (GATE Previous Year Questions), Mechanical Engineering...WatchDuration: 10:24 min
- Pumping Power Fluid Mechanics (GATE Previous Year Question), Mechanical Engineering, GATEWatchDuration: 11:25 min
- Concept of Discharge Fluid Mechanics (GATE Previous Year Question), Mechanical Engineering, GATEWatchDuration: 10:30 min
- Derivation of Bernoulli's Equation, Fluid Mechanics, Mechanical Engineering, GATEWatchDuration: 12:54 min
- Shear Stress Fluid Mechanics (GATE Past Year Question with Solution), Mechanical Engineering, GATEWatchDuration: 10:50 min
Power Plant Engineering22 tests
- Fuels And Combustion - 1AttemptTotal Questions: 10 | Duration: 30 min
- Fuels And Combustion - 2AttemptTotal Questions: 10 | Duration: 30 min
- Analysis Of Steam Cycles - 1AttemptTotal Questions: 10 | Duration: 30 min
- Analysis Of Steam Cycles - 2AttemptTotal Questions: 10 | Duration: 30 min
- Steam Generators - 1AttemptTotal Questions: 10 | Duration: 30 min
- Steam Generators - 2AttemptTotal Questions: 10 | Duration: 30 min
- Steam Turbines -1AttemptTotal Questions: 10 | Duration: 30 min
- Steam Turbines -2AttemptTotal Questions: 10 | Duration: 30 min
- Nuclear Power Plants - 1AttemptTotal Questions: 10 | Duration: 30 min
- Nuclear Power Plants - 2AttemptTotal Questions: 10 | Duration: 30 min
- Hydroelectric Power Plant - 1AttemptTotal Questions: 10 | Duration: 30 min
- Hydroelectric Power Plant - 2AttemptTotal Questions: 10 | Duration: 30 min
- Hydraulic Pump - 1AttemptTotal Questions: 10 | Duration: 30 min
- Hydraulic Pump - 2AttemptTotal Questions: 10 | Duration: 30 min
- Energy Transfer - 1AttemptTotal Questions: 10 | Duration: 30 min
- Energy Transfer - 2AttemptTotal Questions: 10 | Duration: 30 min
- Compressors - 1AttemptTotal Questions: 10 | Duration: 30 min
- Compressors - 2AttemptTotal Questions: 10 | Duration: 30 min
- Gas Turbine Power Plants - 1AttemptTotal Questions: 10 | Duration: 30 min
- Gas Turbine Power Plants - 2AttemptTotal Questions: 10 | Duration: 30 min
- Jet And Rocket Propulsion System - 2AttemptTotal Questions: 10 | Duration: 30 min
- Jet And Rocket Propulsion System - 2AttemptTotal Questions: 10 | Duration: 30 min
Theory of Machines27 videos | 22 tests
- Simple Mechanisms - 1AttemptTotal Questions: 10 | Duration: 30 min
- Simple Mechanisms - 2AttemptTotal Questions: 10 | Duration: 30 min
- Velocity And Acceleration Analysis - 1AttemptTotal Questions: 10 | Duration: 30 min
- Velocity And Acceleration Analysis - 2AttemptTotal Questions: 10 | Duration: 30 min
- What are the Types of Constrained Motion, TOM, Mechanical Engineering, GATEWatchDuration: 06:08 min
- Mechanism With Lower Pairs - 1AttemptTotal Questions: 10 | Duration: 30 min
- Mechanism With Lower Pairs - 2AttemptTotal Questions: 7 | Duration: 20 min
- Cams - 1AttemptTotal Questions: 10 | Duration: 30 min
- Cams - 2AttemptTotal Questions: 10 | Duration: 30 min
- Toothed Gearing - 1AttemptTotal Questions: 10 | Duration: 30 min
- Toothed Gearing - 2AttemptTotal Questions: 10 | Duration: 30 min
- Gear Trains - 1AttemptTotal Questions: 10 | Duration: 30 min
- Gear Trains - 2AttemptTotal Questions: 10 | Duration: 30 min
- Learn Kinematic Chain Video Tutorials Online , Fundamentals & Types of Mechanisms, TOM, GATEWatchDuration: 15:03 min
- Static And Dynamic Force Analysis - 1AttemptTotal Questions: 10 | Duration: 30 min
- Static And Dynamic Force Analysis - 2AttemptTotal Questions: 8 | Duration: 30 min
- Flywheels - 1AttemptTotal Questions: 10 | Duration: 30 min
- Flywheels - 2AttemptTotal Questions: 10 | Duration: 30 min
- Balancing - 1AttemptTotal Questions: 10 | Duration: 30 min
- Balancing - 2AttemptTotal Questions: 10 | Duration: 30 min
- What is the Inversion of Mechanism, TOM, Mechanical Engineering, GATEWatchDuration: 17:06 min
- Governors - 1AttemptTotal Questions: 10 | Duration: 30 min
- Governors - 2AttemptTotal Questions: 10 | Duration: 30 min
- Comparison Between Disc Brake & Drum Brake, TOM, Mechanical Engineering, GATEWatchDuration: 03:50 min
- Linear Vibration Analysis - 1AttemptTotal Questions: 10 | Duration: 30 min
- Linear Vibration Analysis - 2AttemptTotal Questions: 10 | Duration: 30 min
- Problem No.1 on Belt Drive, TOM, Mechanical Engineering, GATEWatchDuration: 19:01 min
- Problem No. 2 on Belt Drive, TOM, Mechanical Engineering, GATEWatchDuration: 13:40 min
- Problem No. 3 on Belt Drive, TOM, Mechanical Engineering, GATEWatchDuration: 09:35 min
- Problem No. 4 on Belt Drive, TOM, Mechanical Engineering, GATEWatchDuration: 05:09 min
- Problem No. 7 on Belt Drive, TOM, Mechanical Engineering, GATEWatchDuration: 05:29 min
- What is Concept of Flywheel and Governors, TOM, Mechanical Engineering, GATEWatchDuration: 06:34 min
- What is Turning Moment Diagram (TMD) for 4-Stroke Engines in Flywheel & Governors, TOM, Mechanical E...WatchDuration: 06:49 min
- What is Fluctuation of Speed and Coefficient of Fluctuation of Speed, Mechanical Engineering, GATEWatchDuration: 07:57 min
- What is Concept of Fluctuation of Energy & Coefficient of Fluctuation in Flywheel, TOM, GATEWatchDuration: 06:17 min
- What is Classification of Governors & Explain Centrifugal Governor; Mechanical EngineeringWatchDuration: 07:31 min
- What is Proell Governor in types of Governors, TOM, Mechanical Engineering, GATEWatchDuration: 03:48 min
- What is a Simple Block Brake, TOM, Mechanical Engineering, GATEWatchDuration: 01:40 min
- Construction and Working of Internal Expanding Brake, TOM, Mechanical Engineering, GATEWatchDuration: 04:56 min
- Working of Layout of Hydraulic Brake System, TOM, Mechanical Engineering, GATEWatchDuration: 04:26 min
- What is Construction and Working of Disc Brakes, TOM, Mechanical Engineering, GATEWatchDuration: 05:46 min
- What is Self Locking & Self Energizing Brake, TOM, Mechanical Engineering, GATEWatchDuration: 06:04 min
- What are Dynamometer & Types of Dynamometers, TOM, Mechanical Engineering, GATEWatchDuration: 03:01 min
- Construction of Rope Brake Dynamometer, TOM, Mechanical Engineering, GATEWatchDuration: 03:20 min
- Construction & Working Of Hydraulic Dynamometer, TOM, Mechanical Engineering, GATEWatchDuration: 02:17 min
- Construction and Working of Prony Brake Dynamometer, TOM, Mechanical Engineering, GATEWatchDuration: 03:26 min
- Construction and Working of Eddy Current Dynamometer, TOM, Mechanical Engineering, GATEWatchDuration: 02:51 min
- What is Cams & Followers, TOM, Mechanical Engineering, GATEWatchDuration: 23:46 min
- Cam Terminology, Cams & Followers, TOM, Mechanical Engineering, GATEWatchDuration: 15:54 min
Thermodynamics19 tests
- Work And Heat Transfer - 1AttemptTotal Questions: 10 | Duration: 30 min
- Work And Heat Transfer - 2AttemptTotal Questions: 10 | Duration: 30 min
- Basic Concept - 1AttemptTotal Questions: 10 | Duration: 30 min
- Basic Concept - 2AttemptTotal Questions: 10 | Duration: 30 min
- TemperatureAttemptTotal Questions: 10 | Duration: 30 min
- First Law Of Thermodynamics - 1AttemptTotal Questions: 10 | Duration: 30 min
- First Law Of Thermodynamics - 2AttemptTotal Questions: 10 | Duration: 30 min
- First Law Applied To Flow Process AttemptTotal Questions: 10 | Duration: 30 min
- Second Law Of Thermodynamics - 1AttemptTotal Questions: 10 | Duration: 30 min
- Second Law Of Thermodynamics - 2AttemptTotal Questions: 10 | Duration: 30 min
- Availability And IrreversibilityAttemptTotal Questions: 10 | Duration: 30 min
- Entropy - 1AttemptTotal Questions: 10 | Duration: 30 min
- Entropy - 2AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Pure Substance - 1AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Pure Substance - 2AttemptTotal Questions: 9 | Duration: 30 min
- Properties Of Gases - 1AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Gases - 2AttemptTotal Questions: 10 | Duration: 30 min
- Thermodynamic Relations - 1AttemptTotal Questions: 10 | Duration: 30 min
- Thermodynamic Relations - 2AttemptTotal Questions: 10 | Duration: 30 min
Refrigeration & Air Conditioning36 videos | 17 tests
- Basics Of Refrigerating Machine - 1AttemptTotal Questions: 10 | Duration: 30 min
- Basics Of Refrigerating Machine - 2AttemptTotal Questions: 10 | Duration: 30 min
- Refrigeration Cycles And Systems - 1AttemptTotal Questions: 10 | Duration: 30 min
- Refrigeration Cycles And Systems - 2AttemptTotal Questions: 10 | Duration: 30 min
- Refrigerants - 1AttemptTotal Questions: 10 | Duration: 30 min
- Refrigerants - 2AttemptTotal Questions: 10 | Duration: 30 min
- Refrigerant CompressorsAttemptTotal Questions: 10 | Duration: 30 min
- Condensers, Evaporators And Expansion Devices - 1AttemptTotal Questions: 10 | Duration: 30 min
- Condensers, Evaporators And Expansion Devices - 2AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Moist Air - 1AttemptTotal Questions: 10 | Duration: 30 min
- Properties Of Moist Air - 2AttemptTotal Questions: 10 | Duration: 30 min
- Psychrometric Chart And Its Application To Air-Conditioning - 1AttemptTotal Questions: 10 | Duration: 30 min
- Comfort Conditions - 1AttemptTotal Questions: 10 | Duration: 30 min
- Comfort Conditions - 2AttemptTotal Questions: 9 | Duration: 25 min
- Solar RefrigerationAttemptTotal Questions: 8 | Duration: 25 min
- Air-duct DesignAttemptTotal Questions: 10 | Duration: 30 min
- Concept of Refrigeration Effect, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 02:24 min
- Concept of Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 02:19 min
- Concept Heat Pump with Approach to Solve Numerical, Refrigeration and Air Conditioning, GATEWatchDuration: 04:38 min
- Psychrometric Chart And Its Application To Air-Conditioning - 2AttemptTotal Questions: 10 | Duration: 30 min
- Dry Compression Vs Wet Compression, Refrigeration and Air Conditioning, Mechanical EngineeringWatchDuration: 04:51 min
- VCRS Cycle Concept, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 10:19 min
- Volumetric Efficiency of Reciprocating Compressor, Refrigeration and Air Conditioning, Mechanical En...WatchDuration: 05:11 min
- Effects of Decreasing Evaporator Pressure on VCRS Cycle, Refrigeration and Air Conditioning, GATEWatchDuration: 04:39 min
- Effects of Increasing Condenser Pressure on VCRS Cycle, Refrigeration and Air Conditioning, GATEWatchDuration: 04:48 min
- Effects of Superheating within the Evaporator on VCRS Cycle, Refrigeration and Air Conditioning, GAT...WatchDuration: 04:32 min
- Capillary Tube Concept, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 05:25 min
- Heat Rejection Ratio, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 07:01 min
- Specific Humidity and Relative Humidity Concept, Refrigeration and Air Conditioning, GATEWatchDuration: 08:06 min
- DBT, WBT and DPT in Case of Saturated and Unsaturated Air, Refrigeration and Air Conditioning, GATEWatchDuration: 02:15 min
- Apjohn Formula, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 01:40 min
- Humidification and Dehumidification, Refrigeration and Air Conditioning, Mechanical Engineering, GAT...WatchDuration: 05:47 min
- Sensible Cooling, Heating, Humidification on Psychrometric Chart, Refrigeration and Air ConditioningWatchDuration: 02:55 min
- Sensible Heating and Sensible Cooling, Refrigeration and Air Conditioning, Mechanical EngineeringWatchDuration: 03:29 min
- Apparatus Dew Point, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 02:10 min
- How to Find out Enthalpy of Moist Air, Refrigeration and Air Conditioning, Mechanical Engineering, G...WatchDuration: 03:03 min
- VARS Basic Concept & How it Works, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 06:21 min
- Types of Refrigerant and Application, Refrigeration and Air Conditioning, Mechanical Engineering, GA...WatchDuration: 04:23 min
- Refrigerants Leak Detection Method, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 02:54 min
- Electrolux Refrigerator, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 03:28 min
- Difference Between VCRS and VARS, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 03:38 min
- Enthalpies at Various Points on TS Diagram, Refrigeration and Air Conditioning, GATEWatchDuration: 03:15 min
- Entropies at Various Points on TS Diagram, Refrigeration and Air Conditioning, GATEWatchDuration: 03:23 min
- Saturated Hydrocarbon Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 05:49 min
- Types of Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 03:55 min
- Unsaturated Hydrocarbon Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GAT...WatchDuration: 03:44 min
- Why R 134 is an Eco-friendly Refrigerant, Refrigeration and Air Conditioning, Mechanical EngineeringWatchDuration: 05:35 min
- Chemical Properties of Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 06:27 min
- Physical Properties of Refrigerant, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 02:39 min
- Thermodynamic Properties of Refrigerant, Refrigeration and Air Conditioning, Mechanical EngineeringWatchDuration: 12:02 min
- Heat Engine and Refrigerator, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 04:35 min
- Heat Engine, Refrigeration and Air Conditioning, Mechanical Engineering, GATEWatchDuration: 03:53 min
- Specific Humidity and Relative Humidity, Refrigeration and Air Conditioning, Mechanical EngineeringWatchDuration: 05:07 min
Heat and Mass Transfer36 videos | 18 tests
- Basic Concepts Of Heat Transfer - 1AttemptTotal Questions: 10 | Duration: 30 min
- Basic Concepts Of Heat Transfer - 2AttemptTotal Questions: 10 | Duration: 30 min
- One-Dimensional Steady-state Conduction - 1AttemptTotal Questions: 10 | Duration: 30 min
- One-Dimensional Steady-State Conduction - 2AttemptTotal Questions: 10 | Duration: 30 min
- Heat Dissipation From Extended Surface - 1AttemptTotal Questions: 10 | Duration: 30 min
- Heat Dissipation From Extended Surface - 2AttemptTotal Questions: 10 | Duration: 30 min
- Transient Heat Conduction - 1AttemptTotal Questions: 10 | Duration: 30 min
- Transient Heat Conduction - 2AttemptTotal Questions: 8 | Duration: 30 min
- Heat Transfer By Natural Convection - 1AttemptTotal Questions: 10 | Duration: 30 min
- Heat Transfer By Natural Convection - 2AttemptTotal Questions: 8 | Duration: 30 min
- Heat Transfer By Forced Convection - 1AttemptTotal Questions: 10 | Duration: 30 min
- Heat Transfer By Forced Convection - 2AttemptTotal Questions: 10 | Duration: 30 min
- Radiation Heat Transfer - 1AttemptTotal Questions: 10 | Duration: 30 min
- Radiation Heat Transfer - 2AttemptTotal Questions: 10 | Duration: 30 min
- Condensation And BoilingAttemptTotal Questions: 10 | Duration: 30 min
- Heat Exchanger - 1AttemptTotal Questions: 10 | Duration: 30 min
- Heat Exchanger - 2AttemptTotal Questions: 10 | Duration: 30 min
- Fundamentals Of Diffusive & Convective Mass TransferAttemptTotal Questions: 10 | Duration: 30 min
- View Factor Radiation GATE (Previous Year Questions with Solutions), Heat and Mass Transfer, GATEWatchDuration: 09:50 min
- Reflectivity Absorptivity and Transmissivity Radiation (GATE Questions with Solution), Heat and MassWatchDuration: 03:14 min
- Heat Transfer Between Two Non Black Bodies (GATE Questions with solution), Heat and Mass TransferWatchDuration: 03:47 min
- Modes of Heat Transfer (Conduction, Convection & Radiation) HMT Tutorial- 3, Heat and Mass Transfer,...WatchDuration: 11:07 min
- Heat and Mass Transfer Basics HMT Tutorial- 1, Heat and Mass Transfer, Mechanical Engineering, GATEWatchDuration: 02:02 min
- Difference between Thermodynamics and Heat Transfer HMT Tutorial- 2, Heat and Mass Transfer, GATEWatchDuration: 03:17 min
- Conduction Process HMT Tutorial- 4, Heat and Mass Transfer, Mechanical Engineering, GATEWatchDuration: 10:34 min
- Thermal conductivity HMT Tutorial- 5, Heat and Mass Transfer, Mechanical Engineering, GATEWatchDuration: 02:26 min
- Conduction Process in Solids, Liquids and Gases HMT Tutorial- 6, Heat and Mass Transfer, GATEWatchDuration: 10:49 min
- What is Radiation Heat and Mass Transfer Tutorial- 7, Heat and Mass Transfer, Mechanical EngineeringWatchDuration: 02:02 min
- Relation Between Heat and Temperature Difference HMT Tutorial- 8, Heat and Mass Transfer, GATEWatchDuration: 02:23 min
- Fourier Law of Heat Conduction HMT Tutorial- 9, Heat and Mass Transfer, Mechanical EngineeringWatchDuration: 03:34 min
- What is Convection Heat and Mass Transfer Tutorial- 10, Heat and Mass Transfer, GATEWatchDuration: 02:05 min
- Conduction Through Plane Wall Numerical Approach HMT Tutorial- 11, Heat and Mass Transfer, GATEWatchDuration: 10:38 min
- Effectiveness of Parallel Flow Heat exchanger HMT Tutorial- 12, Heat and Mass Transfer, GATEWatchDuration: 10:23 min
- Conduction and Convection Through Composite Cylinder HMT Tutorial- 18, Heat and Mass Transfer, Mecha...WatchDuration: 11:44 min
- Radial Conduction Through Composite Cylinders HMT Tutorial- 17, Heat and Mass Transfer, Mechanical E...WatchDuration: 11:23 min
- Radial Conduction Heat Transfer Through Hollow Cylinders HMT Tutorial- 16, Heat and Mass Transfer, M...WatchDuration: 10:21 min
- Conduction and Convection Heat Transfer Through a Composite Wall HMT Tutorial- 15, Heat and Mass Tra...WatchDuration: 11:14 min
- Conduction Through Composite Wall Heat Transfer HMT Tutorial- 14, Heat and Mass Transfer, Mechanical...WatchDuration: 11:24 min
- Dimensionless Numbers in Heat Transfer HMT Tutorial- 13, Heat and Mass Transfer, Mechanical Engineer...WatchDuration: 10:27 min
- Heat Exchanger and Types of Heat Exchanger HMT Tutorial- 19, Heat and Mass Transfer, Mechanical Engi...WatchDuration: 10:34 min
- Parallel Flow Heat Exchanger and Counter Flow Heat Exchanger HMT Tutorial- 20, Heat and Mass Transfe...WatchDuration: 10:29 min
- Fins Introduction, Efficiency & Effectiveness HMT Tutorial- 21, Heat and Mass Transfer, GATEWatchDuration: 16:31 min
- Derivation of Conduction in Caretisian Coordinates HMT Tutorial- 22, Heat and Mass Transfer, GATEWatchDuration: 10:36 min
- Radial Conduction Through Hollow and Composite Sphere Coordinates HMT Tutorial- 23, Heat and Mass Tr...WatchDuration: 10:21 min
- Newton's Law of Cooling HMT Tutorial- 24, Heat and Mass Transfer, Mechanical Engineering, GATEWatchDuration: 11:16 min
- Overall Heat Transfer Coefficient HMT Tutorial- 26, Heat and Mass Transfer, Mechanical EngineeringWatchDuration: 10:27 min
- Number of Transfer Unit NTU Heat Exchanger HMT Tutorial- 27, Heat and Mass Transfer, GATEWatchDuration: 10:49 min
- Heat Exchange Between Non Black Bodies Shield Concept HMT Tutorial- 28, Heat and Mass Transfer, GATEWatchDuration: 10:25 min
- Effectiveness of Heat Exchanger in Counter Flow HMT Tutorial- 29, Heat and Mass TransferWatchDuration: 10:18 min
- Prandtl Number (GATE Previous Year Question) With Solution, Heat and Mass Transfer, GATEWatchDuration: 05:02 min
- LMTD Counter Flow Heat Exchanger (GATE Previous Year Question), Heat and Mass Transfer, GATEWatchDuration: 07:25 min
- LMTD Parallel Flow Heat Exchanger (GATE Previous Year Question), Heat and Mass Transfer, GATEWatchDuration: 05:17 min
- Type of Heat Exchanger (GATE Previous Year Question), Heat and Mass Transfer, GATEWatchDuration: 06:04 min
- Double Pipe Counter Flow Heat Exchanger (GATE Previous Year Question), Heat and Mass Transfer, GATEWatchDuration: 06:49 min
I.C Engine13 tests
- Basics Of IC Engine - 1AttemptTotal Questions: 10 | Duration: 30 min
- Basics Of IC Engine - 2AttemptTotal Questions: 10 | Duration: 30 min
- Air Standard Cycle Of IC Engine - 1AttemptTotal Questions: 10 | Duration: 30 min
- Air Standard Cycle Of IC Engine - 2AttemptTotal Questions: 10 | Duration: 30 min
- Conventional And Alternative Fuels Of IC Engine - 1AttemptTotal Questions: 10 | Duration: 30 min
- Conventional And Alternative Fuels Of IC Engine - 2AttemptTotal Questions: 10 | Duration: 30 min
- Fuel Injection, Ignition And Carburation Of IC Engine - 1AttemptTotal Questions: 10 | Duration: 30 min
- Fuel Injection, Ignition And Carburation Of IC Engine - 2AttemptTotal Questions: 10 | Duration: 30 min
- Combustion And Combustion Chambers Of IC EngineAttemptTotal Questions: 10 | Duration: 30 min
- Supercharging Of IC EngineAttemptTotal Questions: 10 | Duration: 20 min
- Engine Friction, Lubrication And CoolingAttemptTotal Questions: 10 | Duration: 30 min
- Engine Emissions And Their ControlAttemptTotal Questions: 10 | Duration: 30 min
- Testing And PerformanceAttemptTotal Questions: 10 | Duration: 30 min
Strength of Materials20 videos | 22 tests
- Mechanical Properties Of Materials - 1AttemptTotal Questions: 10 | Duration: 30 min
- Mechanical Properties Of Materials - 2AttemptTotal Questions: 10 | Duration: 30 min
- Stress-Strain Relations And Elastic Constants - 1AttemptTotal Questions: 10 | Duration: 30 min
- Stress-Strain Relations And Elastic Constants - 2AttemptTotal Questions: 10 | Duration: 30 min
- Tension, Compression And Shear - 1AttemptTotal Questions: 10 | Duration: 30 min
- Tension, Compression And Shear - 2AttemptTotal Questions: 10 | Duration: 30 min
- SFD and BMD for Cantilever- SFD & BMD Tutorial 1, Strength of Materials, Mechanical Engineering, GAT...WatchDuration: 05:11 min
- Torsion Of Shafts - 1AttemptTotal Questions: 10 | Duration: 30 min
- Torsion Of Shafts - 2AttemptTotal Questions: 10 | Duration: 30 min
- Shear Force And Bending Moment - 1AttemptTotal Questions: 10 | Duration: 30 min
- Shear Force And Bending Moment - 2AttemptTotal Questions: 10 | Duration: 30 min
- Stresses In Beams - 1 AttemptTotal Questions: 10 | Duration: 30 min
- Stresses In Beams - 2AttemptTotal Questions: 10 | Duration: 30 min
- Analysis Of Stress And Strain - 1AttemptTotal Questions: 10 | Duration: 30 min
- Analysis Of StressAnd Strain - 2AttemptTotal Questions: 10 | Duration: 30 min
- Deflection And Theries Of Failure - 1AttemptTotal Questions: 10 | Duration: 30 min
- Deflection And Theies Of Failure - 2AttemptTotal Questions: 10 | Duration: 30 min
- Thin &Thick Walled Pressure Vessels - 1AttemptTotal Questions: 10 | Duration: 30 min
- Thin &Thick Walled Pressure Vessels - 2AttemptTotal Questions: 10 | Duration: 30 min
- Hooke's Law: Concept, Approach to Solve Numerical Problems, Strength of Materials, GATEWatchDuration: 12:54 min
- Struts And Columns - 1AttemptTotal Questions: 10 | Duration: 30 min
- Struts And Columns - 2AttemptTotal Questions: 10 | Duration: 30 min
- Helical Springs - 1AttemptTotal Questions: 10 | Duration: 30 min
- Helical Springs - 2AttemptTotal Questions: 8 | Duration: 30 min
- SFD and BMD for Cantilever with UVL- SFD & BMD Tutorial 3, Strength of Materials, GATEWatchDuration: 05:31 min
- SFD and BMD for Simply Supported Beam with Concentrated Load SFD and BMD Tutorial 4, Strength of Mat...WatchDuration: 06:20 min
- SFD and BMD for Simply Supported Beam with UDL Load- SFD & BMD Tutorial 5, Strength of MaterialsWatchDuration: 10:20 min
- SFD and BMD for Overhanging Beam- SFD BMD Tutorial 6, Strength of Materials, GATEWatchDuration: 05:50 min
- Stress in Each Part SOM in Hindi ((GATE Questions with Solutions)), Strength of Materials, GATEWatchDuration: 04:22 min
- Shear Stress SOM ((GATE Questions with Solutions)), Strength of Materials, Mechanical EngineeringWatchDuration: 02:04 min
- Volumetric Strain SOM (GATE Questions with Solutions), Strength of Materials, Mechanical EngineeringWatchDuration: 03:12 min
- SFD & BMD (GATE Previous Year Question with Solution), Strength of Materials, Mechanical EngineeringWatchDuration: 05:21 min
- Thin Cylinder (GATE Previous Year Question with Solution), Strength of Materials, Mechanical Enginee...WatchDuration: 04:02 min
- Shear Force and Bending Moment Diagram for Simply Supported Beam GATE in Hindi, Strength of Material...WatchDuration: 06:30 min
- Mohr's Circle (GATE Previous Year Question with Solution), Strength of Materials, GATEWatchDuration: 07:35 min
- Shear Force and Bending Moment Diagram for Simply Supported Beam with UDL (Hindi), GATEWatchDuration: 07:39 min
- SFD and BMD for Cantilever with UVL, Strength of Materials, Mechanical Engineering, GATEWatchDuration: 11:25 min
- Euler's Theory of Column (GATE Previous Year Question with Solution), Strength of Materials, GATEWatchDuration: 05:59 min
- SFD & BMD for Overhanging Beam with UDL and Point Load, Strength of Materials, GATEWatchDuration: 11:36 min
- How to Draw SFD & BMD for Over Hanging Beam With Point Load & Couple, Strength of Materials, GATEWatchDuration: 08:50 min
- Maximum Bending Moment and Deflection (GATE Previous Year Questions), Strength of Materials, GATEWatchDuration: 09:02 min
- Maximum Bending Moment and Stress in Simply Supported Beam, Strength of Materials, GATEWatchDuration: 07:55 min
Machine Design15 videos | 18 tests
- Design Against Static Load - 1AttemptTotal Questions: 10 | Duration: 30 min
- Design Against Static Load - 2AttemptTotal Questions: 10 | Duration: 30 min
- Design Against Fluctuating Load - 1AttemptTotal Questions: 10 | Duration: 30 min
- Design Against Fluctuating Load - 2AttemptTotal Questions: 10 | Duration: 30 min
- Shafts, Keys And Couplings - 1AttemptTotal Questions: 10 | Duration: 30 min
- Shafts, Keys And Couplings - 2AttemptTotal Questions: 10 | Duration: 30 min
- Threaded Joints And Power Screws - 1AttemptTotal Questions: 10 | Duration: 30 min
- Threaded Joints And Power Screws - 2AttemptTotal Questions: 10 | Duration: 30 min
- Welded And Riveted Joints - 1AttemptTotal Questions: 10 | Duration: 30 min
- Welded And Riveted Joints - 2AttemptTotal Questions: 10 | Duration: 30 min
- Friction Clutches - 1AttemptTotal Questions: 10 | Duration: 30 min
- Friction Clutches - 2AttemptTotal Questions: 10 | Duration: 30 min
- Belt, Rope And Chain Drives - 1AttemptTotal Questions: 10 | Duration: 30 min
- Belt, Rope And Chain Drives - 2AttemptTotal Questions: 10 | Duration: 30 min
- Bearings - Mechanical Engineering - 1AttemptTotal Questions: 10 | Duration: 30 min
- Bearings - Mechanical Engineering - 2AttemptTotal Questions: 10 | Duration: 30 min
- Gears - Mechanical Engineering - 1AttemptTotal Questions: 10 | Duration: 30 min
- Gears - Mechanical Engineering - 2AttemptTotal Questions: 10 | Duration: 30 min
- Types of Gear Trains Basic, Formula and Numerical Approach for GATE, Machine Design, Mechanical Engi...WatchDuration: 23:12 min
- Soderberg Principle Machine Design Tutorial- 13 (GATE Previous Year Question), Machine Design, Mecha...WatchDuration: 10:30 min
- Euler's Load and Factor of Safety SOM Tutorial- 1 (GATE Previous Year Question), Machine Design, Mec...WatchDuration: 12:33 min
- Fillet Weld Machine Design Tutorial- 12 (GATE Previous Year Question), Machine Design, Mechanical En...WatchDuration: 10:14 min
- Riveted Joints Machine Design Tutorial- 11 (GATE Previous Year Question), Machine Design, Mechanical...WatchDuration: 06:15 min
- Gear Terminology Machine Design Tutorial- 10, Machine Design, Mechanical Engineering, GATEWatchDuration: 13:49 min
- Classification of Gear Machine Design Tutorial- 9, Machine Design, Mechanical Engineering, GATEWatchDuration: 19:37 min
- Life of Bearing Machine Design Tutorial- 8 (GATE Previous Year Question), Machine Design, Mechanical...WatchDuration: 12:26 min
- Gears and Pinion Machine Design Tutorial- 7 (GATE Previous Year Question), Machine Design, Mechanica...WatchDuration: 10:10 min
- Module Machine Design Tutorial- 6 (GATE Previous Year Question), Machine Design, Mechanical Engineer...WatchDuration: 10:18 min
- Sommerfeld Number Machine Design Tutorial- 4 (GATE Previous Year Question), Machine Design, Mechanic...WatchDuration: 10:11 min
- Uniform Pressure Theory in Clutch Machine Design Tutorial- 5 (GATE Previous Year Question), Machine ...WatchDuration: 10:13 min
- Disk Clutch Machine Design Tutorial- 3 (GATE Previous Year Question with Solution), Machine Design, ...WatchDuration: 10:31 min
- Tension in Band Brake Machine Design Tutorial- 1 (GATE Previous Year Question), Machine Design, Mech...WatchDuration: 10:09 min
- Band Brake Machine Design Tutorial- 2 (GATE Previous Year Question), Machine Design, Mechanical Engi...WatchDuration: 10:17 min
Material Science12 tests
- Structural Of Metals & Alloys - 1AttemptTotal Questions: 10 | Duration: 30 min
- Structural Of Metals & Alloys - 2AttemptTotal Questions: 10 | Duration: 30 min
- Equilibrium Diagrams And Phase Changes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Equilibrium Diagrams And Phase Changes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Heat Treatment Of Steels - 1AttemptTotal Questions: 10 | Duration: 30 min
- Heat Treatment Of Steels - 2AttemptTotal Questions: 10 | Duration: 30 min
- Plastics, Ceramics And Composite Materials - 1AttemptTotal Questions: 10 | Duration: 30 min
- Plastics, Ceramics And Composite Materials - 2AttemptTotal Questions: 10 | Duration: 30 min
- Mechanical Properties - 1AttemptTotal Questions: 10 | Duration: 30 min
- Mechanical Properties - 2AttemptTotal Questions: 10 | Duration: 30 min
- Engineering Alloys & Its Common Applications - 1AttemptTotal Questions: 10 | Duration: 30 min
- Engineering Alloys & Its Common Applications - 2AttemptTotal Questions: 10 | Duration: 30 min
Production Engineering22 tests
- Casting Processes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Casting Processes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Forming Processes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Forming Processes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Powder Metallurgy - 1AttemptTotal Questions: 10 | Duration: 30 min
- Powder Metallurgy - 2AttemptTotal Questions: 10 | Duration: 30 min
- Metal Cutting And Tool Materials - 1AttemptTotal Questions: 10 | Duration: 30 min
- Metal Cutting And Tool Materials - 2AttemptTotal Questions: 10 | Duration: 30 min
- Machining Processes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Machining Processes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Joining Processes - 1AttemptTotal Questions: 10 | Duration: 30 min
- Joining Processes - 2AttemptTotal Questions: 10 | Duration: 30 min
- Unconventional Machining Process - 1AttemptTotal Questions: 10 | Duration: 30 min
- Unconventional Machining Process - 2AttemptTotal Questions: 10 | Duration: 30 min
- Numerical Control Of Machine Tools - 1AttemptTotal Questions: 10 | Duration: 30 min
- Numerical Control Of Machine Tools - 2AttemptTotal Questions: 10 | Duration: 30 min
- Jigs And Fixtures - 1AttemptTotal Questions: 10 | Duration: 30 min
- Jigs And Fixtures - 2AttemptTotal Questions: 6 | Duration: 30 min
- Fits And Tolerance - 1AttemptTotal Questions: 10 | Duration: 30 min
- Fits And Tolerance - 2AttemptTotal Questions: 10 | Duration: 30 min
- Metrology - 1AttemptTotal Questions: 10 | Duration: 30 min
- Metrology - 2AttemptTotal Questions: 10 | Duration: 30 min
Industrial Engineering25 tests
- Plant Layout - 1AttemptTotal Questions: 10 | Duration: 30 min
- Plant Layout - 2AttemptTotal Questions: 10 | Duration: 30 min
- Loading And Scheduling - 1AttemptTotal Questions: 10 | Duration: 30 min
- Loading And Scheduling - 2AttemptTotal Questions: 10 | Duration: 30 min
- Assembly Line BalancingAttemptTotal Questions: 10 | Duration: 30 min
- Product DevelopmentAttemptTotal Questions: 10 | Duration: 30 min
- Forecasting - 1AttemptTotal Questions: 10 | Duration: 30 min
- Forecasting - 2AttemptTotal Questions: 10 | Duration: 30 min
- Break Even Analysis - 1AttemptTotal Questions: 10 | Duration: 30 min
- Break Even Analysis - 2AttemptTotal Questions: 7 | Duration: 20 min
- Work Study - 1AttemptTotal Questions: 10 | Duration: 30 min
- Work Study - 2AttemptTotal Questions: 10 | Duration: 30 min
- Material Requirement PlanningAttemptTotal Questions: 10 | Duration: 30 min
- Quality Analysis And Control - 1AttemptTotal Questions: 10 | Duration: 30 min
- Quality Analysis And Control - 2AttemptTotal Questions: 10 | Duration: 30 min
- Inventory Control - 1AttemptTotal Questions: 10 | Duration: 30 min
- Inventory Control - 2AttemptTotal Questions: 10 | Duration: 30 min
- PERT And CPM - 1AttemptTotal Questions: 10 | Duration: 30 min
- PERT And CPM - 2AttemptTotal Questions: 10 | Duration: 30 min
- Linear Programming - 1AttemptTotal Questions: 10 | Duration: 30 min
- Linear Programming - 2AttemptTotal Questions: 7 | Duration: 20 min
- Transportation And Assignment ModelAttemptTotal Questions: 10 | Duration: 30 min
- Queuing Theory - 1AttemptTotal Questions: 10 | Duration: 30 min
- Queuing Theory - 2AttemptTotal Questions: 10 | Duration: 30 min
- Value EngineeringAttemptTotal Questions: 10 | Duration: 30 min
Mathematics59 videos | 14 tests
- Eigenvalues And Eigenvectors - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Eigenvalues And Eigenvectors - MCQ Test 2AttemptTotal Questions: 25 | Duration: 75 min
- Calculus, Theorems Of Integral Calculus - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Calculus, Theorems Of Integral Calculus - MCQ Test 2AttemptTotal Questions: 20 | Duration: 60 min
- Partial Derivatives, Gradient - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Partial Derivatives, Gradient - MCQ Test 2AttemptTotal Questions: 25 | Duration: 75 min
- Systems Of Linear Equations, Matrix Algebra And Transform Theory - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Systems Of Linear Equations, Matrix Algebra And Transform Theory - MCQ Test 2AttemptTotal Questions: 30 | Duration: 90 min
- Fourier Series, Numerical Methods And Complex Variables - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Fourier Series, Numerical Methods And Complex Variables - MCQ Test 2AttemptTotal Questions: 30 | Duration: 90 min
- Differential Equations And Multiple Integrals - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Differential Equations And Multiple Integrals - MCQ Test 2AttemptTotal Questions: 30 | Duration: 90 min
- Probability And Statistics - MCQ Test 1AttemptTotal Questions: 20 | Duration: 60 min
- Probability And Statistics - MCQ Test 2AttemptTotal Questions: 30 | Duration: 90 min
- Linear Algebra part-1 (Matrix Algebra), Mathematics, Mechanical Engineering, GATEWatchDuration: 40:48 min
- Linear algebra part-2 (Determinants), Mathematics, Mechanical Engineering, GATEWatchDuration: 43:30 min
- Linear Algebra Part 3 (Rank of Matrix), Mathematics, Mechanical Engineering, GATEWatchDuration: 31:43 min
- Linear Algebra Part 4 (System of Linear equations), Mathematics, Mechanical Engineering, GATEWatchDuration: 58:49 min
- Linear Algebra Part-5 (Eigenvalues and Eigen Vectors), Mathematics, Mechanical Engineering, GATEWatchDuration: 61:30 min
- Linear Algebra part-6 (Cayley Hamilton Theorem), Mathematics, Mechanical Engineering, GATEWatchDuration: 29:28 min
- Books Suggestion of Engineering Mathematics for GATE, Mathematics, Mechanical Engineering, GATEWatchDuration: 06:06 min
- Differential Equation Part -1 (Order & Degree of differential Equation), Mathematics, Mechanical Eng...WatchDuration: 16:59 min
- Differential Equation Part-2 (Variable Separable Method), Mathematics, Mechanical Engineering, GATEWatchDuration: 30:06 min
- Differential equation Part 3 (Linear Differential equation), Mathematics, Mechanical Engineering, GA...WatchDuration: 33:17 min
- Differential equation Part-4 (Exact Differential equation), Mathematics, Mechanical Engineering, GAT...WatchDuration: 24:07 min
- Differential equation Part-5 (Equation Reducible to Exact eq-I), Mathematics, Mechanical Engineering...WatchDuration: 35:44 min
- Differential equation Part-6 (Equation Reducible to Exact eq), Mathematics, Mechanical Engineering, ...WatchDuration: 29:10 min
- Differential equation Part-7 (Higher Order Linear Differential Equation-I), Mathematics, Mechanical ...WatchDuration: 46:21 min
- Differential equation Part 8 ,, Higher Order Linear Differential Equation-II, Mathematics, Mechanica...WatchDuration: 37:36 min
- Differential equation Part-9 (Higher Order Linear Differential Equation-III), Mathematics, Mechanica...WatchDuration: 25:26 min
- Differential equation Part-10 ,, Method of Variation of Parameters, Mathematics, Mechanical Engineer...WatchDuration: 17:59 min
- Differential equation Part 11 (Cauchy’s Linear Equations), Mathematics, Mechanical Engineering, GATEWatchDuration: 18:01 min
- Differential equation Part 12 Lagendre’s Linear Equations, Mathematics, Mechanical Engineering, GATEWatchDuration: 18:19 min
- Probability Part 1 ,, Basic Definitions, Mathematics, Mechanical Engineering, GATEWatchDuration: 21:55 min
- Probability Part 2 ,, Rules of Probability, Mathematics, Mechanical Engineering, GATEWatchDuration: 14:56 min
- Probability Part 3 ,, GATE Questions, Mathematics, Mechanical Engineering, GATEWatchDuration: 35:02 min
- Probability Part 4 ,, BAYES Theorem, Mathematics, Mechanical Engineering, GATEWatchDuration: 32:11 min
- Probability Part-5 (Random Variable), Mathematics, Mechanical Engineering, GATEWatchDuration: 21:43 min
- Probability Part 6 ,, Random Variable Question, Mathematics, Mechanical Engineering, GATEWatchDuration: 29:01 min
- Probability Part 7 ,, Binomial Distribution, Mathematics, Mechanical Engineering, GATEWatchDuration: 18:13 min
- Probability Part-8 ,, Poisson Distribution, Mathematics, Mechanical Engineering, GATEWatchDuration: 09:38 min
- Probability Part 9 ,, Normal Distribution Function, Mathematics, Mechanical Engineering, GATEWatchDuration: 18:08 min
- Vector Calculus Part 1 (Basics), Mathematics, Mechanical Engineering, GATEWatchDuration: 19:53 min
- Vector Calculus Part 2 (Gradient and Directional Directive), Mathematics, Mechanical Engineering, GAWatchDuration: 14:27 min
- Vector Calculus Part 3 (Divergence and curl), Mathematics, Mechanical Engineering, GATEWatchDuration: 22:02 min
- Vector Calculus Part 4 (Vector Integration), Mathematics, Mechanical Engineering, GATEWatchDuration: 29:33 min
- Vector Calculus Part 5 (Green's Theorem), Mathematics, Mechanical Engineering, GATEWatchDuration: 19:05 min
- Vector Calculus Part 6 (Stoke's Theorem), Mathematics, Mechanical Engineering, GATEWatchDuration: 13:34 min
- Vector Calculus Part 7 (GAuss Divergence Theorem), Mathematics, Mechanical Engineering, GATEWatchDuration: 11:27 min
- Calculus Part-1 (Limit & Continuity), Mathematics, Mechanical Engineering, GATEWatchDuration: 14:55 min
- Calculus Part 2 (Indeterminate Forms), Mathematics, Mechanical Engineering, GATEWatchDuration: 12:13 min
- Calculus Part 3 (Indeterminate Form), Mathematics, Mechanical Engineering, GATEWatchDuration: 19:37 min
- Calculus Part-4 (Indeterminate Form), Mathematics, Mechanical Engineering, GATEWatchDuration: 16:50 min
- Partial Differential Part 1, Mathematics, Mechanical Engineering, GATEWatchDuration: 12:34 min
- Partial Differential Part-2 (Second Order Partial Differential), Mathematics, Mechanical Engineering...WatchDuration: 24:28 min
- Partial Differential Part-3 (Homogeneous Functions), Mathematics, Mechanical Engineering, GATEWatchDuration: 26:24 min
- Partial Differential Part-4 (Euler's Theorem), Mathematics, Mechanical Engineering, GATEWatchDuration: 13:08 min
- Partial Differential Part-5 (Total Derivatives), Mathematics, Mechanical Engineering, GATEWatchDuration: 15:52 min
- Partial Differential Part-6 (Total Derivatives), Mathematics, Mechanical Engineering, GATEWatchDuration: 13:37 min
- Maxima & Minima Part-1 (Single Variable), Mathematics, Mechanical Engineering, GATEWatchDuration: 14:42 min
- Maxima & Minima Part-2 (Two independent Variable), Mathematics, Mechanical Engineering, GATEWatchDuration: 18:46 min
- Definite Integrals Part-1 (Properties), Mathematics, Mechanical Engineering, GATEWatchDuration: 21:50 min
- Definite Integrals Part-2 (GATE Questions), Mathematics, Mechanical Engineering, GATEWatchDuration: 18:01 min
- Definite Integrals Part-3 (Improper Definite Integral), Mathematics, Mechanical Engineering, GATEWatchDuration: 10:08 min
- Definite Integrals Part-5 (Applications), Mathematics, Mechanical Engineering, GATEWatchDuration: 16:24 min
- Definite Integrals Part-7 (Applications), Mathematics, Mechanical Engineering, GATEWatchDuration: 07:37 min
- Complex Functions Part-1 (Basics), Mathematics, Mechanical Engineering, GATEWatchDuration: 12:03 min
- Complex Functions Part-2 (Basics), Mathematics, Mechanical Engineering, GATEWatchDuration: 14:52 min
- Complex Functions Part-3 (Analytic Function), Mathematics, Mechanical Engineering, GATEWatchDuration: 18:35 min
- Complex Functions Part-4 (Analytic Function), Mathematics, Mechanical Engineering, GATEWatchDuration: 21:10 min
- Complex Functions Part-5 (Analytic Function), Mathematics, Mechanical Engineering, GATEWatchDuration: 22:58 min
- Complex Functions Part-6 (Analytic Function), Mathematics, Mechanical Engineering, GATEWatchDuration: 20:13 min
- Complex Functions Part-7 (Complex Integration), Mathematics, CSE, GATEWatchDuration: 13:39 min
Share with a friend
For Your Perfect Score in Mechanical Engineering
The Best you need at One Place
Start Your Infinity Experience
Course Speciality
- Multiple tests for each topic, chapter and subject to eliminate weakness till the last level
- Multiple Complete Tests to sharpen your strategy before the final Exam
- See where you stand in the cou...ntry for each test by checking your rank after every attempt
- Online Virtual Calculator available with each test more
Meet the Instructors
Related courses
Related Searches
Steam Generators - 1
,Heat Transfer By Forced Convection - 1
,Pressure & Its Measurement - 1
,Cams - 1
,Forecasting - 1
,Mechanical Properties - 1
,Metal Cutting And Tool Materials - 1
,Loading And Scheduling - 1
,Refrigerant Compressors
,Toothed Gearing - 1
,Welded And Riveted Joints - 1
,Basic Concept - 1
,Keys And Couplings - 1
,Shafts
,Hydrostatic Forces On Surfaces
,Transient Heat Conduction - 1
Share with a friend
Test from this Course
Related courses
Best way to Prepare for Mechanical Engineering
Learn | Test | Discuss | Repeat
Start Your Infinity Experience
Course Category
Follow Us
