Gate (CS) 1998 Paper without Solution | GATE Computer Science Engineering(CSE) 2025 Mock Test Series - Computer Science Engineering (CSE) PDF Download

Download, print and study this document offline
Please wait while the PDF view is loading
 Page 1


GATE CS - 1998
  
SECTION - A 
1. This question consists of 35 THIRTY-FIVE multiple questions of ONE mark each.
For each question, four possible alternatives (A, B, C and D) are given, out of
which ONLY ONE is correct. Indicate the correct answer in the boxes
corresponding to the questions only on the FIRST sheet of the answer book.
1.1 A die is rolled three times. The probability that exactly one odd number turns up 
among the three outcomes is 
(a) 
1
6
(b) 
3
8
(c) 
1
8
(d) 
1
2
1.2 Consider the following set of equations: 
2 5
4 8 12
3 6 3 15
x y
x y
x y z
+ =
+ =
+ + =
This set 
(a) has unique solution (b) has no solutions 
(c) has finite number of solutions (d) has infinite number of solutions 
1.3 Which of the following statements applies to the bisection method used for 
finding roots of functions:  
(a) converges within a few iterations 
(b) guaranteed to work for all continuous functions  
(c) is faster than the Newton-Raphson method  
(d) requires that there be no error in determining the sign of the function.  
1.4 Consider the function y x = in the interval [-1,1]. In this interval, the function is 
(a) continuous and differentiable 
(b) continuous but not differentiable 
(c) differentiable but not continuous 
(d) neither continuous nor differentiable 
1.5 What is the converse of the following assertion? 
I stay only if you go 
(a) I stay if you go 
(b) If I stay then you go 
(c) If you do not go then I do not stay 
(d) If I do not stay then you go 
Page 2


GATE CS - 1998
  
SECTION - A 
1. This question consists of 35 THIRTY-FIVE multiple questions of ONE mark each.
For each question, four possible alternatives (A, B, C and D) are given, out of
which ONLY ONE is correct. Indicate the correct answer in the boxes
corresponding to the questions only on the FIRST sheet of the answer book.
1.1 A die is rolled three times. The probability that exactly one odd number turns up 
among the three outcomes is 
(a) 
1
6
(b) 
3
8
(c) 
1
8
(d) 
1
2
1.2 Consider the following set of equations: 
2 5
4 8 12
3 6 3 15
x y
x y
x y z
+ =
+ =
+ + =
This set 
(a) has unique solution (b) has no solutions 
(c) has finite number of solutions (d) has infinite number of solutions 
1.3 Which of the following statements applies to the bisection method used for 
finding roots of functions:  
(a) converges within a few iterations 
(b) guaranteed to work for all continuous functions  
(c) is faster than the Newton-Raphson method  
(d) requires that there be no error in determining the sign of the function.  
1.4 Consider the function y x = in the interval [-1,1]. In this interval, the function is 
(a) continuous and differentiable 
(b) continuous but not differentiable 
(c) differentiable but not continuous 
(d) neither continuous nor differentiable 
1.5 What is the converse of the following assertion? 
I stay only if you go 
(a) I stay if you go 
(b) If I stay then you go 
(c) If you do not go then I do not stay 
(d) If I do not stay then you go 
GATE CS - 1998
  
1.6 Suppose A is a finite set with n elements. The number of elements in the largest 
equivalence relation of A is 
(a) n (b) 
2
n (c) 1 (d) n + 1 
1.7 Let R
1
 and R
2
 be two equivalence relations on a set. Consider the following 
assertions: 
(i) 
1 2
R R ? is an equivalence relation 
(ii) 
1 2
R R n is an equivalence relation 
Which of the following is correct? 
(a) Both assertions are true 
(b) Assertion (i) is true but assertion (ii) is not true 
(c) Assertion (ii) is true but assertion (i) is not true 
(d) Neither (i) nor (ii) is true 
1.8 The number of functions from an m element set to an n element set is 
(a) m + n (b) 
n
m (c) 
m
n (d) m*n 
1.9 If the regular set A is represented by A = (01 + 1)* and the regular set ‘B’ is 
represented by B = ((01)*1*)*, which of the following is true? 
(a) A ? B (b) B ? A 
(c) A and B are incomparable (d) A = B 
1.10 Which of the following set can be recognized by a Deterministic Finite state 
Automaton? 
(a) The numbers 1, 2, 4, 8, ……………. 2
n
, ………… written in binary 
(b) The numbers 1, 2, 4, ……………….,2
n
, …………..written in unary 
(c) The set of binary string in which the number of zeros is the same as the 
number of ones.   
(d) The set {1, 101, 11011, 1110111, ………..} 
1.11 Regarding the power of recognition of languages, which of the following 
statements is false? 
(a) The non-deterministic finite-state automata are equivalent to deterministic 
finite-state automata.  
(b) Non-deterministic Push-down automata are equivalent to deterministic Push-
down automata. 
(c) Non-deterministic Turing machines are equivalent to deterministic Push-down 
automata. 
(d) Non-deterministic Turing machines are equivalent to deterministic Turing 
machines. 
(e) Multi-tape Turing machines are equivalent to Single-tape Turing machines. 
Page 3


GATE CS - 1998
  
SECTION - A 
1. This question consists of 35 THIRTY-FIVE multiple questions of ONE mark each.
For each question, four possible alternatives (A, B, C and D) are given, out of
which ONLY ONE is correct. Indicate the correct answer in the boxes
corresponding to the questions only on the FIRST sheet of the answer book.
1.1 A die is rolled three times. The probability that exactly one odd number turns up 
among the three outcomes is 
(a) 
1
6
(b) 
3
8
(c) 
1
8
(d) 
1
2
1.2 Consider the following set of equations: 
2 5
4 8 12
3 6 3 15
x y
x y
x y z
+ =
+ =
+ + =
This set 
(a) has unique solution (b) has no solutions 
(c) has finite number of solutions (d) has infinite number of solutions 
1.3 Which of the following statements applies to the bisection method used for 
finding roots of functions:  
(a) converges within a few iterations 
(b) guaranteed to work for all continuous functions  
(c) is faster than the Newton-Raphson method  
(d) requires that there be no error in determining the sign of the function.  
1.4 Consider the function y x = in the interval [-1,1]. In this interval, the function is 
(a) continuous and differentiable 
(b) continuous but not differentiable 
(c) differentiable but not continuous 
(d) neither continuous nor differentiable 
1.5 What is the converse of the following assertion? 
I stay only if you go 
(a) I stay if you go 
(b) If I stay then you go 
(c) If you do not go then I do not stay 
(d) If I do not stay then you go 
GATE CS - 1998
  
1.6 Suppose A is a finite set with n elements. The number of elements in the largest 
equivalence relation of A is 
(a) n (b) 
2
n (c) 1 (d) n + 1 
1.7 Let R
1
 and R
2
 be two equivalence relations on a set. Consider the following 
assertions: 
(i) 
1 2
R R ? is an equivalence relation 
(ii) 
1 2
R R n is an equivalence relation 
Which of the following is correct? 
(a) Both assertions are true 
(b) Assertion (i) is true but assertion (ii) is not true 
(c) Assertion (ii) is true but assertion (i) is not true 
(d) Neither (i) nor (ii) is true 
1.8 The number of functions from an m element set to an n element set is 
(a) m + n (b) 
n
m (c) 
m
n (d) m*n 
1.9 If the regular set A is represented by A = (01 + 1)* and the regular set ‘B’ is 
represented by B = ((01)*1*)*, which of the following is true? 
(a) A ? B (b) B ? A 
(c) A and B are incomparable (d) A = B 
1.10 Which of the following set can be recognized by a Deterministic Finite state 
Automaton? 
(a) The numbers 1, 2, 4, 8, ……………. 2
n
, ………… written in binary 
(b) The numbers 1, 2, 4, ……………….,2
n
, …………..written in unary 
(c) The set of binary string in which the number of zeros is the same as the 
number of ones.   
(d) The set {1, 101, 11011, 1110111, ………..} 
1.11 Regarding the power of recognition of languages, which of the following 
statements is false? 
(a) The non-deterministic finite-state automata are equivalent to deterministic 
finite-state automata.  
(b) Non-deterministic Push-down automata are equivalent to deterministic Push-
down automata. 
(c) Non-deterministic Turing machines are equivalent to deterministic Push-down 
automata. 
(d) Non-deterministic Turing machines are equivalent to deterministic Turing 
machines. 
(e) Multi-tape Turing machines are equivalent to Single-tape Turing machines. 
GATE CS - 1998
  
1.12  The string 1101 does not belong to the set represented by 
(a) 110*(0 + 1) (b) 1 ( 0 + 1)* 101 
(c) (10)* (01)* (00 + 11)* (d) (00 + (11)*0)* 
1.13 What happens when a bit-string is XORed with itself n-times as shown: 
( ( (
 times B B B B n
? ?
? ? ?
? ?
? ?
K
(a) complements when n is even (b) complements when n is odd 
(c) divides by 2
n
always   
(d) remains unchanged when n is even 
1.14 A multiplexor with a 4 bit data select input is a 
(a) 4:1 multiplexor (b) 2:1 multiplexor  
(c) 16:1 multiplexor (d) 8:1 multiplexor 
1.15 The threshold level for logic 1 in the TTL family is 
(a) any voltage above 2.5 V 
(b) any voltage between 0.8 V and 5.0 V 
(c) any voltage below 5.0 V 
(d) any voltage below 
cc
V but above 2.8 V 
1.16 In serial communication employing 8 data bits, a parity bit and 2 stop bits, the 
minimum band rate required to sustain a transfer rate of 300 characters per 
second is 
(a) 2400 band (b) 19200 band 
(c) 4800 band (d) 1200 band 
1.17 The octal representation of an integer is 3428. If this were to be treated as an 
eight-bit integer is an 8085 based computer, its decimal equivalent is 
(a) 226 (b) -98 (c) 76 (d) -30 
1.18 Which of the following devices should get higher priority in assigning interrupts? 
(a) Hard disk   (b) Printer 
(c) Keyboard   (d) Floppy disk 
1.19 Which of the following addressing modes permits relocation without any change 
whatsoever in the code? 
(a) Indirect addressing  (b) Indexed addressing 
(c) Base register addressing (d) PC relative addressing 
Page 4


GATE CS - 1998
  
SECTION - A 
1. This question consists of 35 THIRTY-FIVE multiple questions of ONE mark each.
For each question, four possible alternatives (A, B, C and D) are given, out of
which ONLY ONE is correct. Indicate the correct answer in the boxes
corresponding to the questions only on the FIRST sheet of the answer book.
1.1 A die is rolled three times. The probability that exactly one odd number turns up 
among the three outcomes is 
(a) 
1
6
(b) 
3
8
(c) 
1
8
(d) 
1
2
1.2 Consider the following set of equations: 
2 5
4 8 12
3 6 3 15
x y
x y
x y z
+ =
+ =
+ + =
This set 
(a) has unique solution (b) has no solutions 
(c) has finite number of solutions (d) has infinite number of solutions 
1.3 Which of the following statements applies to the bisection method used for 
finding roots of functions:  
(a) converges within a few iterations 
(b) guaranteed to work for all continuous functions  
(c) is faster than the Newton-Raphson method  
(d) requires that there be no error in determining the sign of the function.  
1.4 Consider the function y x = in the interval [-1,1]. In this interval, the function is 
(a) continuous and differentiable 
(b) continuous but not differentiable 
(c) differentiable but not continuous 
(d) neither continuous nor differentiable 
1.5 What is the converse of the following assertion? 
I stay only if you go 
(a) I stay if you go 
(b) If I stay then you go 
(c) If you do not go then I do not stay 
(d) If I do not stay then you go 
GATE CS - 1998
  
1.6 Suppose A is a finite set with n elements. The number of elements in the largest 
equivalence relation of A is 
(a) n (b) 
2
n (c) 1 (d) n + 1 
1.7 Let R
1
 and R
2
 be two equivalence relations on a set. Consider the following 
assertions: 
(i) 
1 2
R R ? is an equivalence relation 
(ii) 
1 2
R R n is an equivalence relation 
Which of the following is correct? 
(a) Both assertions are true 
(b) Assertion (i) is true but assertion (ii) is not true 
(c) Assertion (ii) is true but assertion (i) is not true 
(d) Neither (i) nor (ii) is true 
1.8 The number of functions from an m element set to an n element set is 
(a) m + n (b) 
n
m (c) 
m
n (d) m*n 
1.9 If the regular set A is represented by A = (01 + 1)* and the regular set ‘B’ is 
represented by B = ((01)*1*)*, which of the following is true? 
(a) A ? B (b) B ? A 
(c) A and B are incomparable (d) A = B 
1.10 Which of the following set can be recognized by a Deterministic Finite state 
Automaton? 
(a) The numbers 1, 2, 4, 8, ……………. 2
n
, ………… written in binary 
(b) The numbers 1, 2, 4, ……………….,2
n
, …………..written in unary 
(c) The set of binary string in which the number of zeros is the same as the 
number of ones.   
(d) The set {1, 101, 11011, 1110111, ………..} 
1.11 Regarding the power of recognition of languages, which of the following 
statements is false? 
(a) The non-deterministic finite-state automata are equivalent to deterministic 
finite-state automata.  
(b) Non-deterministic Push-down automata are equivalent to deterministic Push-
down automata. 
(c) Non-deterministic Turing machines are equivalent to deterministic Push-down 
automata. 
(d) Non-deterministic Turing machines are equivalent to deterministic Turing 
machines. 
(e) Multi-tape Turing machines are equivalent to Single-tape Turing machines. 
GATE CS - 1998
  
1.12  The string 1101 does not belong to the set represented by 
(a) 110*(0 + 1) (b) 1 ( 0 + 1)* 101 
(c) (10)* (01)* (00 + 11)* (d) (00 + (11)*0)* 
1.13 What happens when a bit-string is XORed with itself n-times as shown: 
( ( (
 times B B B B n
? ?
? ? ?
? ?
? ?
K
(a) complements when n is even (b) complements when n is odd 
(c) divides by 2
n
always   
(d) remains unchanged when n is even 
1.14 A multiplexor with a 4 bit data select input is a 
(a) 4:1 multiplexor (b) 2:1 multiplexor  
(c) 16:1 multiplexor (d) 8:1 multiplexor 
1.15 The threshold level for logic 1 in the TTL family is 
(a) any voltage above 2.5 V 
(b) any voltage between 0.8 V and 5.0 V 
(c) any voltage below 5.0 V 
(d) any voltage below 
cc
V but above 2.8 V 
1.16 In serial communication employing 8 data bits, a parity bit and 2 stop bits, the 
minimum band rate required to sustain a transfer rate of 300 characters per 
second is 
(a) 2400 band (b) 19200 band 
(c) 4800 band (d) 1200 band 
1.17 The octal representation of an integer is 3428. If this were to be treated as an 
eight-bit integer is an 8085 based computer, its decimal equivalent is 
(a) 226 (b) -98 (c) 76 (d) -30 
1.18 Which of the following devices should get higher priority in assigning interrupts? 
(a) Hard disk   (b) Printer 
(c) Keyboard   (d) Floppy disk 
1.19 Which of the following addressing modes permits relocation without any change 
whatsoever in the code? 
(a) Indirect addressing  (b) Indexed addressing 
(c) Base register addressing (d) PC relative addressing 
GATE CS - 1998
  
1.20 Which of the following is true? 
(a) Unless enabled, a CPU will not be able to process interrupts. 
(b) Loop instructions cannot be interrupted till they complete. 
(c) A processor checks for interrupts before executing a new instruction. 
(d) Only level triggered interrupts are possible on microprocessors 
1.21 Which one of the following algorithm design techniques is used in finding all pairs 
of shortest distances in a graph? 
(a) Dynamic programming (b) Backtracking 
(c) Greedy   (d) Divide and Conquer 
1.22 Give the correct matching for the following pairs: 
(a) A – R  B – P  C – Q  D - S (b) A – R  B – P  C – S  D - Q 
(c) A – P  B – R  C – S  D - Q (d) A – P  B – S  C – R  D - Q 
1.23 How many sub strings of different lengths (non-zero) can be found formed from a 
character string of length n? 
(a) n (b) 
2
n (c) 2
n
 (d) 
( ) 1
2
n n+
1.24 Which of the following statements is false? 
(a) A tree with a n nodes has (n – 1) edges 
(b) A labeled rooted binary tree can be uniquely constructed given its postorder 
and preorder traversal results. 
(c) A complete binary tree with n internal nodes has (n + 1) leaves. 
(d) The maximum number of nodes in a binary tree of height h is 
( )
1
2 1
h+
-
1.25 In a resident – OS computer, which of the following systems must reside in the 
main memory under all situations? 
(a) Assembler   (b) Linker 
(c) Loader   (d) Compiler 
(A) O (log n) (P) Selection 
(B) O (n) (Q) Insertion sort 
(C) O (n log n) (R) Binary search 
(D) O 
( )
2
n
(S) Merge sort 
Page 5


GATE CS - 1998
  
SECTION - A 
1. This question consists of 35 THIRTY-FIVE multiple questions of ONE mark each.
For each question, four possible alternatives (A, B, C and D) are given, out of
which ONLY ONE is correct. Indicate the correct answer in the boxes
corresponding to the questions only on the FIRST sheet of the answer book.
1.1 A die is rolled three times. The probability that exactly one odd number turns up 
among the three outcomes is 
(a) 
1
6
(b) 
3
8
(c) 
1
8
(d) 
1
2
1.2 Consider the following set of equations: 
2 5
4 8 12
3 6 3 15
x y
x y
x y z
+ =
+ =
+ + =
This set 
(a) has unique solution (b) has no solutions 
(c) has finite number of solutions (d) has infinite number of solutions 
1.3 Which of the following statements applies to the bisection method used for 
finding roots of functions:  
(a) converges within a few iterations 
(b) guaranteed to work for all continuous functions  
(c) is faster than the Newton-Raphson method  
(d) requires that there be no error in determining the sign of the function.  
1.4 Consider the function y x = in the interval [-1,1]. In this interval, the function is 
(a) continuous and differentiable 
(b) continuous but not differentiable 
(c) differentiable but not continuous 
(d) neither continuous nor differentiable 
1.5 What is the converse of the following assertion? 
I stay only if you go 
(a) I stay if you go 
(b) If I stay then you go 
(c) If you do not go then I do not stay 
(d) If I do not stay then you go 
GATE CS - 1998
  
1.6 Suppose A is a finite set with n elements. The number of elements in the largest 
equivalence relation of A is 
(a) n (b) 
2
n (c) 1 (d) n + 1 
1.7 Let R
1
 and R
2
 be two equivalence relations on a set. Consider the following 
assertions: 
(i) 
1 2
R R ? is an equivalence relation 
(ii) 
1 2
R R n is an equivalence relation 
Which of the following is correct? 
(a) Both assertions are true 
(b) Assertion (i) is true but assertion (ii) is not true 
(c) Assertion (ii) is true but assertion (i) is not true 
(d) Neither (i) nor (ii) is true 
1.8 The number of functions from an m element set to an n element set is 
(a) m + n (b) 
n
m (c) 
m
n (d) m*n 
1.9 If the regular set A is represented by A = (01 + 1)* and the regular set ‘B’ is 
represented by B = ((01)*1*)*, which of the following is true? 
(a) A ? B (b) B ? A 
(c) A and B are incomparable (d) A = B 
1.10 Which of the following set can be recognized by a Deterministic Finite state 
Automaton? 
(a) The numbers 1, 2, 4, 8, ……………. 2
n
, ………… written in binary 
(b) The numbers 1, 2, 4, ……………….,2
n
, …………..written in unary 
(c) The set of binary string in which the number of zeros is the same as the 
number of ones.   
(d) The set {1, 101, 11011, 1110111, ………..} 
1.11 Regarding the power of recognition of languages, which of the following 
statements is false? 
(a) The non-deterministic finite-state automata are equivalent to deterministic 
finite-state automata.  
(b) Non-deterministic Push-down automata are equivalent to deterministic Push-
down automata. 
(c) Non-deterministic Turing machines are equivalent to deterministic Push-down 
automata. 
(d) Non-deterministic Turing machines are equivalent to deterministic Turing 
machines. 
(e) Multi-tape Turing machines are equivalent to Single-tape Turing machines. 
GATE CS - 1998
  
1.12  The string 1101 does not belong to the set represented by 
(a) 110*(0 + 1) (b) 1 ( 0 + 1)* 101 
(c) (10)* (01)* (00 + 11)* (d) (00 + (11)*0)* 
1.13 What happens when a bit-string is XORed with itself n-times as shown: 
( ( (
 times B B B B n
? ?
? ? ?
? ?
? ?
K
(a) complements when n is even (b) complements when n is odd 
(c) divides by 2
n
always   
(d) remains unchanged when n is even 
1.14 A multiplexor with a 4 bit data select input is a 
(a) 4:1 multiplexor (b) 2:1 multiplexor  
(c) 16:1 multiplexor (d) 8:1 multiplexor 
1.15 The threshold level for logic 1 in the TTL family is 
(a) any voltage above 2.5 V 
(b) any voltage between 0.8 V and 5.0 V 
(c) any voltage below 5.0 V 
(d) any voltage below 
cc
V but above 2.8 V 
1.16 In serial communication employing 8 data bits, a parity bit and 2 stop bits, the 
minimum band rate required to sustain a transfer rate of 300 characters per 
second is 
(a) 2400 band (b) 19200 band 
(c) 4800 band (d) 1200 band 
1.17 The octal representation of an integer is 3428. If this were to be treated as an 
eight-bit integer is an 8085 based computer, its decimal equivalent is 
(a) 226 (b) -98 (c) 76 (d) -30 
1.18 Which of the following devices should get higher priority in assigning interrupts? 
(a) Hard disk   (b) Printer 
(c) Keyboard   (d) Floppy disk 
1.19 Which of the following addressing modes permits relocation without any change 
whatsoever in the code? 
(a) Indirect addressing  (b) Indexed addressing 
(c) Base register addressing (d) PC relative addressing 
GATE CS - 1998
  
1.20 Which of the following is true? 
(a) Unless enabled, a CPU will not be able to process interrupts. 
(b) Loop instructions cannot be interrupted till they complete. 
(c) A processor checks for interrupts before executing a new instruction. 
(d) Only level triggered interrupts are possible on microprocessors 
1.21 Which one of the following algorithm design techniques is used in finding all pairs 
of shortest distances in a graph? 
(a) Dynamic programming (b) Backtracking 
(c) Greedy   (d) Divide and Conquer 
1.22 Give the correct matching for the following pairs: 
(a) A – R  B – P  C – Q  D - S (b) A – R  B – P  C – S  D - Q 
(c) A – P  B – R  C – S  D - Q (d) A – P  B – S  C – R  D - Q 
1.23 How many sub strings of different lengths (non-zero) can be found formed from a 
character string of length n? 
(a) n (b) 
2
n (c) 2
n
 (d) 
( ) 1
2
n n+
1.24 Which of the following statements is false? 
(a) A tree with a n nodes has (n – 1) edges 
(b) A labeled rooted binary tree can be uniquely constructed given its postorder 
and preorder traversal results. 
(c) A complete binary tree with n internal nodes has (n + 1) leaves. 
(d) The maximum number of nodes in a binary tree of height h is 
( )
1
2 1
h+
-
1.25 In a resident – OS computer, which of the following systems must reside in the 
main memory under all situations? 
(a) Assembler   (b) Linker 
(c) Loader   (d) Compiler 
(A) O (log n) (P) Selection 
(B) O (n) (Q) Insertion sort 
(C) O (n log n) (R) Binary search 
(D) O 
( )
2
n
(S) Merge sort 
GATE CS - 1998
  
1.26 Which of the following statements is true? 
(a) SLR parser is more powerful than LALR 
(b) LALR parser is more powerful than Canonical LR parser 
(c) Canonical LR parser is more powerful than LALR parser. 
(d) The parsers SLR, Canonical CR, and LALR have the same power 
1.27 Type checking is normally done during 
(a) lexical analysis (b) syntax analysis 
(c) syntax directed translation (d) code optimization 
1.28 A linker reads four modules whose lengths are 200, 800, 600 and 500 words, 
respectively. If they are loaded in that order, what are the relocation constants? 
(a) 0, 200, 500, 600   (b) 0, 200, 1000, 1600 
(c) 200, 500, 600, 800  (d) 200, 700, 1300, 2100 
1.29 Which of the following is an example of a spooled device? 
(a) The terminal used to enter the input data for the C program being executed 
(b) An output device used to print the output of a number of jobs. 
(c) The secondary memory device in a virtual storage system 
(d) The swapping area on a disk used by the swapper. 
1.30 When the result of a computation depends on the speed of the processes 
involved there is said to be  
(a) cycle steating    (b) rare condition 
(c) a time lock   (d) a deadlock 
1.31  A counting semaphore was initialized to 10. Then 6 P (wait) operations and 4V 
(signal) operations were completed on this semaphore. The resulting value of the 
semaphore is 
(a) 0 (b) 8 (c) 10 (d) 12 
1.32 A computer has six tape drives, with n processes competing for them. Each 
process may need two drives. What is the maximum value of n for the system to 
be deadlock free? 
(a) 6 (b) 5 (c) 4 (d) 3 
1.33 Given two union compatible relations R
1
(A,B) and R
2
 (C,D), what is the result of 
the operation R
1
A = CAB = DR
2
? 
(a) 
1 2
R R ? (b) 
1 2
R R × (c) 
1 2
R R - (d) 
1 2
R R n
Read More
55 docs|215 tests

Top Courses for Computer Science Engineering (CSE)

FAQs on Gate (CS) 1998 Paper without Solution - GATE Computer Science Engineering(CSE) 2025 Mock Test Series - Computer Science Engineering (CSE)

1. What is the significance of the Gate (CS) 1998 Paper in Computer Science Engineering?
Ans. The Gate (CS) 1998 Paper is significant in Computer Science Engineering as it is a past question paper for the Graduate Aptitude Test in Engineering (GATE). GATE is a highly competitive examination in India that tests the knowledge and understanding of various subjects, including computer science. The 1998 paper provides an opportunity for students to practice and prepare for the actual GATE exam.
2. How can I access the Gate (CS) 1998 Paper without solutions?
Ans. You can access the Gate (CS) 1998 Paper without solutions by searching for it on various online platforms. Many educational websites and forums offer past GATE papers for free. Alternatively, you can also check with your college or university library, as they may have archived copies of previous year's GATE papers.
3. What are the benefits of solving the Gate (CS) 1998 Paper for GATE preparation?
Ans. Solving the Gate (CS) 1998 Paper for GATE preparation offers several benefits. Firstly, it familiarizes you with the exam pattern, types of questions, and the level of difficulty. Secondly, it helps you assess your strengths and weaknesses in different topics of computer science. Thirdly, it provides an opportunity to practice time management and improve your speed in solving questions. Lastly, it serves as a valuable resource for understanding the GATE syllabus and identifying important topics.
4. Are the questions in the Gate (CS) 1998 Paper still relevant for the current GATE exam?
Ans. While the Gate (CS) 1998 Paper is from a past year, the core concepts and fundamentals of computer science remain relatively unchanged. Therefore, many of the questions in the 1998 paper are still relevant for the current GATE exam. However, it is important to note that the GATE syllabus and exam pattern may have undergone some changes over the years. It is advisable to refer to the latest GATE syllabus and previous year's papers to ensure comprehensive preparation.
5. Can solving the Gate (CS) 1998 Paper guarantee success in the GATE exam?
Ans. Solving the Gate (CS) 1998 Paper is a helpful part of GATE preparation but it does not guarantee success in the exam. GATE is a highly competitive and comprehensive examination that requires in-depth knowledge and understanding of various subjects. While practicing previous year papers like the 1998 paper can improve your familiarity with the exam pattern and boost your confidence, it is equally important to study the GATE syllabus thoroughly, refer to other study materials, and engage in regular revision and mock tests to maximize your chances of success.
55 docs|215 tests
Download as PDF
Explore Courses for Computer Science Engineering (CSE) exam

Top Courses for Computer Science Engineering (CSE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Extra Questions

,

pdf

,

Summary

,

Objective type Questions

,

Sample Paper

,

shortcuts and tricks

,

Important questions

,

Free

,

study material

,

past year papers

,

MCQs

,

Gate (CS) 1998 Paper without Solution | GATE Computer Science Engineering(CSE) 2025 Mock Test Series - Computer Science Engineering (CSE)

,

mock tests for examination

,

ppt

,

Viva Questions

,

Semester Notes

,

Previous Year Questions with Solutions

,

practice quizzes

,

Gate (CS) 1998 Paper without Solution | GATE Computer Science Engineering(CSE) 2025 Mock Test Series - Computer Science Engineering (CSE)

,

Gate (CS) 1998 Paper without Solution | GATE Computer Science Engineering(CSE) 2025 Mock Test Series - Computer Science Engineering (CSE)

,

video lectures

,

Exam

;