Architecture and Planning (AR) 2013 GATE Paper without solution GATE Notes | EduRev

GATE Past Year Papers for Practice (All Branches)

GATE : Architecture and Planning (AR) 2013 GATE Paper without solution GATE Notes | EduRev

 Page 1


2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 1/12
AR:ARCHITECTURE AND PLANNING 
 
Duration: Three Hours        Maximum Marks:100 
 
Please read the following instructions carefully: 
 
General Instructions: 
 
1. Total duration of examination is 180 minutes (3 hours).  
 
2. The clock will be set at the server.  The countdown timer in the top right corner of screen will display 
the remaining time available for you to complete the examination. When the timer reaches zero, the 
examination will end by itself. You will not be required to end or submit your examination.  
 
3. The Question Palette displayed on the right side of screen will show the status of each question using 
one of the following symbols:  
  
 
You have not visited the question yet. 
 
You have not answered the question. 
 
You have answered the question.  
 
You have NOT answered the question, but have marked the 
question for review. 
 
You have answered the question, but marked it for review.  
 
The Marked for Review status for a question simply indicates that you would like to look at that 
question again. If a question is answered and  Marked for Review, your answer for that question 
will be considered in the evaluation. 
 
Navigating to a Question 
 
4. To answer a question, do the following: 
 
a. Click on the question number in the Question Palette to go to that question directly.  
b. Select an answer for a multiple choice type question. Use the virtual numeric keypad to enter 
a number as answer for a numerical type question.  
c. Click on Save and Next to save your answer for the current question and then go to the next 
question.  
d. Click on Mark for Review and Next to save your answer for the  current question, mark it 
for review, and then go to the next question. 
e. Caution: Note that your answer for the current question will not be saved, if you 
navigate to another question directly by clicking on its question number.  
 
5. You can view all the questions by clicking on the Question Paper button. Note that the options for 
multiple choice type questions will not be shown.  
 
  
Page 2


2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 1/12
AR:ARCHITECTURE AND PLANNING 
 
Duration: Three Hours        Maximum Marks:100 
 
Please read the following instructions carefully: 
 
General Instructions: 
 
1. Total duration of examination is 180 minutes (3 hours).  
 
2. The clock will be set at the server.  The countdown timer in the top right corner of screen will display 
the remaining time available for you to complete the examination. When the timer reaches zero, the 
examination will end by itself. You will not be required to end or submit your examination.  
 
3. The Question Palette displayed on the right side of screen will show the status of each question using 
one of the following symbols:  
  
 
You have not visited the question yet. 
 
You have not answered the question. 
 
You have answered the question.  
 
You have NOT answered the question, but have marked the 
question for review. 
 
You have answered the question, but marked it for review.  
 
The Marked for Review status for a question simply indicates that you would like to look at that 
question again. If a question is answered and  Marked for Review, your answer for that question 
will be considered in the evaluation. 
 
Navigating to a Question 
 
4. To answer a question, do the following: 
 
a. Click on the question number in the Question Palette to go to that question directly.  
b. Select an answer for a multiple choice type question. Use the virtual numeric keypad to enter 
a number as answer for a numerical type question.  
c. Click on Save and Next to save your answer for the current question and then go to the next 
question.  
d. Click on Mark for Review and Next to save your answer for the  current question, mark it 
for review, and then go to the next question. 
e. Caution: Note that your answer for the current question will not be saved, if you 
navigate to another question directly by clicking on its question number.  
 
5. You can view all the questions by clicking on the Question Paper button. Note that the options for 
multiple choice type questions will not be shown.  
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 2/12
Answering a Question 
 
6. Procedure for answering a multiple choice type question: 
a. To select your answer, click on the button of one of  the options 
b. To deselect your chosen answer, click on the button of the chosen option again or click on the 
Clear Response button  
c. To change your chosen answer, click on the button of  another option 
d. To save your answer, you MUST click on the Save and Next button 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is selected for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
7. Procedure for answering a numerical answer type question: 
a. To enter a number as your answer, use the virtual numerical keypad 
b. A fraction (eg.,-0.3 or -.3) can be entered as an answer with or without ‘0’ before the decimal 
point 
c. To clear your answer, click on the Clear Response button 
d. To save your answer, you MUST click on the Save and Nextbutton 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is entered for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
8. To change your answer to a question that has already been answered, first select that question for 
answering and then follow the procedure for answering that type of question.  
 
9. Note that ONLY Questions for which answers  are saved or marked for review after answering will be 
considered for evaluation. 
 
 
 
 
 
  
Page 3


2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 1/12
AR:ARCHITECTURE AND PLANNING 
 
Duration: Three Hours        Maximum Marks:100 
 
Please read the following instructions carefully: 
 
General Instructions: 
 
1. Total duration of examination is 180 minutes (3 hours).  
 
2. The clock will be set at the server.  The countdown timer in the top right corner of screen will display 
the remaining time available for you to complete the examination. When the timer reaches zero, the 
examination will end by itself. You will not be required to end or submit your examination.  
 
3. The Question Palette displayed on the right side of screen will show the status of each question using 
one of the following symbols:  
  
 
You have not visited the question yet. 
 
You have not answered the question. 
 
You have answered the question.  
 
You have NOT answered the question, but have marked the 
question for review. 
 
You have answered the question, but marked it for review.  
 
The Marked for Review status for a question simply indicates that you would like to look at that 
question again. If a question is answered and  Marked for Review, your answer for that question 
will be considered in the evaluation. 
 
Navigating to a Question 
 
4. To answer a question, do the following: 
 
a. Click on the question number in the Question Palette to go to that question directly.  
b. Select an answer for a multiple choice type question. Use the virtual numeric keypad to enter 
a number as answer for a numerical type question.  
c. Click on Save and Next to save your answer for the current question and then go to the next 
question.  
d. Click on Mark for Review and Next to save your answer for the  current question, mark it 
for review, and then go to the next question. 
e. Caution: Note that your answer for the current question will not be saved, if you 
navigate to another question directly by clicking on its question number.  
 
5. You can view all the questions by clicking on the Question Paper button. Note that the options for 
multiple choice type questions will not be shown.  
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 2/12
Answering a Question 
 
6. Procedure for answering a multiple choice type question: 
a. To select your answer, click on the button of one of  the options 
b. To deselect your chosen answer, click on the button of the chosen option again or click on the 
Clear Response button  
c. To change your chosen answer, click on the button of  another option 
d. To save your answer, you MUST click on the Save and Next button 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is selected for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
7. Procedure for answering a numerical answer type question: 
a. To enter a number as your answer, use the virtual numerical keypad 
b. A fraction (eg.,-0.3 or -.3) can be entered as an answer with or without ‘0’ before the decimal 
point 
c. To clear your answer, click on the Clear Response button 
d. To save your answer, you MUST click on the Save and Nextbutton 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is entered for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
8. To change your answer to a question that has already been answered, first select that question for 
answering and then follow the procedure for answering that type of question.  
 
9. Note that ONLY Questions for which answers  are saved or marked for review after answering will be 
considered for evaluation. 
 
 
 
 
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 3/12
Paper specific instructions: 
 
 
1. There are a total of 65 questions carrying 100 marks.Questions are of multiple choice type or 
numerical answer type. A multiple choice type question will have four choices for the answer with 
only one correct choice. For numerical answer type questions, the answer is a number and no choices 
will be given. A number as the answer should be entered using the virtual keyboard on the monitor. 
 
2. Questions Q.1 – Q.25 carry 1mark each. Questions Q.26 – Q.55 carry 2marks each. The 2marks 
questions include two pairs of common data questions and two pairs of linked answer questions. The 
answer to the second question of the linked answer questions depends on the answer to the first 
question of the pair. If the first question in the linked pair is wrongly answered or is not attempted, 
then the answer to the second question in the pair will not be evaluated. 
 
3. Questions Q.56 – Q.65 belong to General Aptitude (GA) section and carry a total of 15 marks. 
Questions Q.56 – Q.60 carry 1mark each, and questions Q.61 – Q.65 carry 2marks each.   
 
4. Questions not attempted will result in zero mark. Wrong answers for multiple choice type questions 
will result in NEGATIVE marks.  For all 1 mark questions, ? mark will be deducted for each wrong 
answer. For all 2 marks questions, ? mark will be deducted for each wrong answer.  However, in the 
case of the linked answer question pair, there will be negative marks only for wrong answer to the 
first question and no negative marks for wrong answer to the second question. There is no negative 
marking for questions of numerical answer type. 
 
5. Calculator is allowed. Charts, graph sheets or tables are NOT allowed in the examination hall.  
 
6. Do the rough work in the Scribble Pad provided. 
  
Page 4


2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 1/12
AR:ARCHITECTURE AND PLANNING 
 
Duration: Three Hours        Maximum Marks:100 
 
Please read the following instructions carefully: 
 
General Instructions: 
 
1. Total duration of examination is 180 minutes (3 hours).  
 
2. The clock will be set at the server.  The countdown timer in the top right corner of screen will display 
the remaining time available for you to complete the examination. When the timer reaches zero, the 
examination will end by itself. You will not be required to end or submit your examination.  
 
3. The Question Palette displayed on the right side of screen will show the status of each question using 
one of the following symbols:  
  
 
You have not visited the question yet. 
 
You have not answered the question. 
 
You have answered the question.  
 
You have NOT answered the question, but have marked the 
question for review. 
 
You have answered the question, but marked it for review.  
 
The Marked for Review status for a question simply indicates that you would like to look at that 
question again. If a question is answered and  Marked for Review, your answer for that question 
will be considered in the evaluation. 
 
Navigating to a Question 
 
4. To answer a question, do the following: 
 
a. Click on the question number in the Question Palette to go to that question directly.  
b. Select an answer for a multiple choice type question. Use the virtual numeric keypad to enter 
a number as answer for a numerical type question.  
c. Click on Save and Next to save your answer for the current question and then go to the next 
question.  
d. Click on Mark for Review and Next to save your answer for the  current question, mark it 
for review, and then go to the next question. 
e. Caution: Note that your answer for the current question will not be saved, if you 
navigate to another question directly by clicking on its question number.  
 
5. You can view all the questions by clicking on the Question Paper button. Note that the options for 
multiple choice type questions will not be shown.  
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 2/12
Answering a Question 
 
6. Procedure for answering a multiple choice type question: 
a. To select your answer, click on the button of one of  the options 
b. To deselect your chosen answer, click on the button of the chosen option again or click on the 
Clear Response button  
c. To change your chosen answer, click on the button of  another option 
d. To save your answer, you MUST click on the Save and Next button 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is selected for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
7. Procedure for answering a numerical answer type question: 
a. To enter a number as your answer, use the virtual numerical keypad 
b. A fraction (eg.,-0.3 or -.3) can be entered as an answer with or without ‘0’ before the decimal 
point 
c. To clear your answer, click on the Clear Response button 
d. To save your answer, you MUST click on the Save and Nextbutton 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is entered for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
8. To change your answer to a question that has already been answered, first select that question for 
answering and then follow the procedure for answering that type of question.  
 
9. Note that ONLY Questions for which answers  are saved or marked for review after answering will be 
considered for evaluation. 
 
 
 
 
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 3/12
Paper specific instructions: 
 
 
1. There are a total of 65 questions carrying 100 marks.Questions are of multiple choice type or 
numerical answer type. A multiple choice type question will have four choices for the answer with 
only one correct choice. For numerical answer type questions, the answer is a number and no choices 
will be given. A number as the answer should be entered using the virtual keyboard on the monitor. 
 
2. Questions Q.1 – Q.25 carry 1mark each. Questions Q.26 – Q.55 carry 2marks each. The 2marks 
questions include two pairs of common data questions and two pairs of linked answer questions. The 
answer to the second question of the linked answer questions depends on the answer to the first 
question of the pair. If the first question in the linked pair is wrongly answered or is not attempted, 
then the answer to the second question in the pair will not be evaluated. 
 
3. Questions Q.56 – Q.65 belong to General Aptitude (GA) section and carry a total of 15 marks. 
Questions Q.56 – Q.60 carry 1mark each, and questions Q.61 – Q.65 carry 2marks each.   
 
4. Questions not attempted will result in zero mark. Wrong answers for multiple choice type questions 
will result in NEGATIVE marks.  For all 1 mark questions, ? mark will be deducted for each wrong 
answer. For all 2 marks questions, ? mark will be deducted for each wrong answer.  However, in the 
case of the linked answer question pair, there will be negative marks only for wrong answer to the 
first question and no negative marks for wrong answer to the second question. There is no negative 
marking for questions of numerical answer type. 
 
5. Calculator is allowed. Charts, graph sheets or tables are NOT allowed in the examination hall.  
 
6. Do the rough work in the Scribble Pad provided. 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 4/12
 
Q. 1 – Q. 25 carry one mark each. 
Q.1 In case of residential apartments, the effective floor area available for use within an apartment, is   
known as 
(A)  Carpet Area (B)  Built-up Area 
(C)  Plinth Area (D)  Super Built-up Area 
 
Q.2 Star  Rating of an Air Conditioner is determined by its  
(A)  Power Consumption (B)  Energy Efficiency Ratio 
(C)  Cooling Capacity (D)  Power of Compressor 
 
Q.3 V7 concept given by Le Corbusier refers to 
(A)  Neighbourhood Planning (B)  Housing Typologies 
(C)  Architecture Design Principle (D)  Hierarchy of Roads 
 
Q.4 In AUTOCAD, a line of infinite length in the direction defined by starting point and through point, 
is known as 
(A)  RAY (B)  LINE (C)  PLINE (D)  XLINE 
 
Q.5 Orbit Tower built at the London Olympic Park has been designed by 
(A)  Foster & Partners (B)  Anish Kapoor & Cecil Balmond 
(C)  Zaha Hadid & Antony Gormley (D)  Richard Rogers & Renzo Piano 
 
Q.6 As per National Building Code 2005, the minimum size of a habitable room in m
2
 is 
(A)  9.5 (B)  10.5 (C)  11.5 (D)  12.5 
 
Q.7 The urban form of Srirangam town in Tamil Nadu refers to  
(A)  Dandaka (B)  Swastika (C)  Nandyavarta   (D)  Sarvotabhadra  
 
Q.8 PMGSY, a programme of  Government of India, deals with 
(A)  Urban Employment Generation (B)  Rural Employment Generation 
(C)  Rural Electrification (D)  Rural Road Development 
 
Q.9 Beam or lowest division of the entablature which extends from column to column, is  
known as 
(A)  Arabesque   (B)  Arcade   (C)  Architrave     (D)  Arbour    
 
Q.10 The information that is NOT essential to be submitted for sanction of any building plan is 
(A)  Site Plan (B)  Floor Plans (C)  Title Deed (D)  Land Cost    
 
Q.11 The tendency of an ecosystem to maintain its balance by regulatory mechanisms when disrupted, is 
known as 
(A)  Homeostasis (B)  Entropy (C)  Succession (D)  Evolution 
 
Q.12 Gantt Chart DOES NOT provide information about 
(A)  List of Jobs (B)  Duration of Jobs 
(C)  Interdependency of Jobs (D)  Progress of Work 
 
Page 5


2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 1/12
AR:ARCHITECTURE AND PLANNING 
 
Duration: Three Hours        Maximum Marks:100 
 
Please read the following instructions carefully: 
 
General Instructions: 
 
1. Total duration of examination is 180 minutes (3 hours).  
 
2. The clock will be set at the server.  The countdown timer in the top right corner of screen will display 
the remaining time available for you to complete the examination. When the timer reaches zero, the 
examination will end by itself. You will not be required to end or submit your examination.  
 
3. The Question Palette displayed on the right side of screen will show the status of each question using 
one of the following symbols:  
  
 
You have not visited the question yet. 
 
You have not answered the question. 
 
You have answered the question.  
 
You have NOT answered the question, but have marked the 
question for review. 
 
You have answered the question, but marked it for review.  
 
The Marked for Review status for a question simply indicates that you would like to look at that 
question again. If a question is answered and  Marked for Review, your answer for that question 
will be considered in the evaluation. 
 
Navigating to a Question 
 
4. To answer a question, do the following: 
 
a. Click on the question number in the Question Palette to go to that question directly.  
b. Select an answer for a multiple choice type question. Use the virtual numeric keypad to enter 
a number as answer for a numerical type question.  
c. Click on Save and Next to save your answer for the current question and then go to the next 
question.  
d. Click on Mark for Review and Next to save your answer for the  current question, mark it 
for review, and then go to the next question. 
e. Caution: Note that your answer for the current question will not be saved, if you 
navigate to another question directly by clicking on its question number.  
 
5. You can view all the questions by clicking on the Question Paper button. Note that the options for 
multiple choice type questions will not be shown.  
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 2/12
Answering a Question 
 
6. Procedure for answering a multiple choice type question: 
a. To select your answer, click on the button of one of  the options 
b. To deselect your chosen answer, click on the button of the chosen option again or click on the 
Clear Response button  
c. To change your chosen answer, click on the button of  another option 
d. To save your answer, you MUST click on the Save and Next button 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is selected for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
7. Procedure for answering a numerical answer type question: 
a. To enter a number as your answer, use the virtual numerical keypad 
b. A fraction (eg.,-0.3 or -.3) can be entered as an answer with or without ‘0’ before the decimal 
point 
c. To clear your answer, click on the Clear Response button 
d. To save your answer, you MUST click on the Save and Nextbutton 
e. To mark the question for review, click on the Mark for Review and Nextbutton. If an 
answer is entered for a question that is Marked for Review, that answer will be considered 
in the evaluation. 
 
8. To change your answer to a question that has already been answered, first select that question for 
answering and then follow the procedure for answering that type of question.  
 
9. Note that ONLY Questions for which answers  are saved or marked for review after answering will be 
considered for evaluation. 
 
 
 
 
 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 3/12
Paper specific instructions: 
 
 
1. There are a total of 65 questions carrying 100 marks.Questions are of multiple choice type or 
numerical answer type. A multiple choice type question will have four choices for the answer with 
only one correct choice. For numerical answer type questions, the answer is a number and no choices 
will be given. A number as the answer should be entered using the virtual keyboard on the monitor. 
 
2. Questions Q.1 – Q.25 carry 1mark each. Questions Q.26 – Q.55 carry 2marks each. The 2marks 
questions include two pairs of common data questions and two pairs of linked answer questions. The 
answer to the second question of the linked answer questions depends on the answer to the first 
question of the pair. If the first question in the linked pair is wrongly answered or is not attempted, 
then the answer to the second question in the pair will not be evaluated. 
 
3. Questions Q.56 – Q.65 belong to General Aptitude (GA) section and carry a total of 15 marks. 
Questions Q.56 – Q.60 carry 1mark each, and questions Q.61 – Q.65 carry 2marks each.   
 
4. Questions not attempted will result in zero mark. Wrong answers for multiple choice type questions 
will result in NEGATIVE marks.  For all 1 mark questions, ? mark will be deducted for each wrong 
answer. For all 2 marks questions, ? mark will be deducted for each wrong answer.  However, in the 
case of the linked answer question pair, there will be negative marks only for wrong answer to the 
first question and no negative marks for wrong answer to the second question. There is no negative 
marking for questions of numerical answer type. 
 
5. Calculator is allowed. Charts, graph sheets or tables are NOT allowed in the examination hall.  
 
6. Do the rough work in the Scribble Pad provided. 
  
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 4/12
 
Q. 1 – Q. 25 carry one mark each. 
Q.1 In case of residential apartments, the effective floor area available for use within an apartment, is   
known as 
(A)  Carpet Area (B)  Built-up Area 
(C)  Plinth Area (D)  Super Built-up Area 
 
Q.2 Star  Rating of an Air Conditioner is determined by its  
(A)  Power Consumption (B)  Energy Efficiency Ratio 
(C)  Cooling Capacity (D)  Power of Compressor 
 
Q.3 V7 concept given by Le Corbusier refers to 
(A)  Neighbourhood Planning (B)  Housing Typologies 
(C)  Architecture Design Principle (D)  Hierarchy of Roads 
 
Q.4 In AUTOCAD, a line of infinite length in the direction defined by starting point and through point, 
is known as 
(A)  RAY (B)  LINE (C)  PLINE (D)  XLINE 
 
Q.5 Orbit Tower built at the London Olympic Park has been designed by 
(A)  Foster & Partners (B)  Anish Kapoor & Cecil Balmond 
(C)  Zaha Hadid & Antony Gormley (D)  Richard Rogers & Renzo Piano 
 
Q.6 As per National Building Code 2005, the minimum size of a habitable room in m
2
 is 
(A)  9.5 (B)  10.5 (C)  11.5 (D)  12.5 
 
Q.7 The urban form of Srirangam town in Tamil Nadu refers to  
(A)  Dandaka (B)  Swastika (C)  Nandyavarta   (D)  Sarvotabhadra  
 
Q.8 PMGSY, a programme of  Government of India, deals with 
(A)  Urban Employment Generation (B)  Rural Employment Generation 
(C)  Rural Electrification (D)  Rural Road Development 
 
Q.9 Beam or lowest division of the entablature which extends from column to column, is  
known as 
(A)  Arabesque   (B)  Arcade   (C)  Architrave     (D)  Arbour    
 
Q.10 The information that is NOT essential to be submitted for sanction of any building plan is 
(A)  Site Plan (B)  Floor Plans (C)  Title Deed (D)  Land Cost    
 
Q.11 The tendency of an ecosystem to maintain its balance by regulatory mechanisms when disrupted, is 
known as 
(A)  Homeostasis (B)  Entropy (C)  Succession (D)  Evolution 
 
Q.12 Gantt Chart DOES NOT provide information about 
(A)  List of Jobs (B)  Duration of Jobs 
(C)  Interdependency of Jobs (D)  Progress of Work 
 
2013                                                                                                                                                                     ARCHITECTURE & PLANNING  –  AR 
AR 5/12
Q.13 If threshold of hearing has a sound level of zero decibels and the sound level in a broadcasting 
studio is 100 times the threshold of hearing, its value in decibels would be 
(A)  0 (B)  10 (C)  20 (D)  100 
 
Q.14 The width to height ratio of the front facade of Parthenon (without the pediment) is  
(A)  9:4 (B)  4:9 (C)  1:1.618 (D)  1.618:1 
 
Q.15 The face of an Icosahedron is
 
(A)  Equilateral Triangle (B)  Isosceles Triangle 
(C)  Square (D)  Pentagon 
 
Q.16 The term ‘Zeitgist’, used in contemporary architecture, refers to 
(A)  Iconicity (B)  Spirit of Times (C)  Kinesthetics  (D)  Semantic Associations 
 
Q.17 Alhambra, a UNESCO world heritage site, is classified as an example of  
(A)  Moorish Architecture (B)  Mudejar Architecture 
(C)  Mozarabic Architecture (D)  Tudor Architecture 
 
Q.18 Wythenshawe and Becontree are examples of  
(A)  Factory Town (B)  Satellite Town 
(C)  Garden City    (D)  Vertical Neighborhood   
 
Q.19 National Ceremonial Plaza at Thimpu in Bhutan has been designed by 
(A)  Christopher Charles Benninger (B)  Charles Correa 
(C)  Karan Grover (D)  I. M. Pei 
 
Q.20 Physiochemical process of removing micro-organisms, colour and turbidity from sullage and 
sewage is known as 
(A)  Putrefaction (B)  Clarification 
(C)  Liquefaction (D)  Infiltration 
 
Q.21 Identify which is NOT a green building rating system 
(A)  LEED (B)  CASBEE (C)  ENERGY BUILD (D)  BREEAM 
 
Q.22 In 3DS Max, smooth 3D surfaces, by blending a series of selected shape curves, can be created by 
(A)  Lofting (B)  Sweeping (C)  Filleting (D)  Extruding 
 
Q.23 Travel behavior characteristics of an urban area can be derived from 
(A)  Parking Survey (B)  Demographic Survey 
(C)  Socio Economic Survey (D)  Origin & Destination Survey 
 
Q.24 In GIS, the set of entities representing vector data type is  
(A)  Point, Line, Polygon, TIN (B)  Pixel, Voxel 
(C)  DEM, DSM, DTM (D)  Coordinates, Elevation, Slope 
 
Q.25 A common flowering shrub is 
(A)  Tectona grandis (B)  Mimusops elengi (C)  Dalbergia sisso (D)  Ixora coccinea  
Read More
Offer running on EduRev: Apply code STAYHOME200 to get INR 200 off on our premium plan EduRev Infinity!

Related Searches

Exam

,

Objective type Questions

,

Sample Paper

,

Important questions

,

Summary

,

MCQs

,

Architecture and Planning (AR) 2013 GATE Paper without solution GATE Notes | EduRev

,

study material

,

Free

,

ppt

,

past year papers

,

Previous Year Questions with Solutions

,

mock tests for examination

,

Viva Questions

,

Architecture and Planning (AR) 2013 GATE Paper without solution GATE Notes | EduRev

,

Extra Questions

,

practice quizzes

,

video lectures

,

Architecture and Planning (AR) 2013 GATE Paper without solution GATE Notes | EduRev

,

Semester Notes

,

shortcuts and tricks

,

pdf

;