Capacitors in Series Video Lecture - Physics Class 12 - NEET

Having to deal with a
single capacitor hooked up
to a battery isn't
all that difficult,
but when you have
multiple capacitors,
people typically get
much, much more confused.
There's all kinds
of different ways
to hook up multiple capacitors.
But if capacitors
are connected one
after the other in
this way, we call
them capacitors
hooked up in series.
So say you were taking
a test, and on the test
it asked you to find the charge
on the leftmost capacitor.
What some people might
try to do is this.
Since capacitance is the
charge divided by the voltage,
they might plug
in the capacitance
of the leftmost capacitor,
which is 4 farads, plug
in the voltage of the
battery, which is 9 volts.
Solving for the charge, they'd
get that the leftmost capacitor
stores 36 coulombs, which
is totally the wrong answer.
To try and figure out
why and to figure out
how to properly deal with
this type of scenario,
let's look at what's actually
going on in this example.
When the battery's hooked
up, a negative charge
will start to flow from
the right side of capacitor
3, which makes a negative
charge get deposited
on the left side of capacitor 1.
This makes a
negative charge flow
from the right
side of capacitor 1
on to the left side
of capacitor 2.
And that makes a
negative charge flow
from the right
side of capacitor 2
on to the left side
of capacitor 3.
Charges will
continue doing this.
And it's important to
note something here.
Because of the way the
charging process works,
all of the capacitors here
must have the same amount
of charge stored on them.
It's got to be that way.
Looking at how these
capacitors charge up,
there's just nowhere
else for the charge
to go but on to the next
capacitor in the line.
This is actually good news.
This means that for
capacitors in series,
the charge stored
on every capacitor
is going to be the same.
So if you find the charge
on one of the capacitors,
you've found the charge
on all of the capacitors.
But how do we figure out
what that amount of charge
is going to be?
Well, there's a
trick we can use when
dealing with
situations like this.
We can imagine replacing
our three capacitors
with just a single
equivalent capacitor.
If we choose the right value
for this single capacitor,
then it will store the
same amount of charge
as each of the three
capacitors in series will.
The reason this is
useful is because we
know how to deal with
a single capacitor.
We call this imaginary
single capacitor
that's replacing
multiple capacitors
the "equivalent capacitor."
It's called the
equivalent capacitor
because its effect
on the circuit
is, well, equivalent
to the sum total effect
that the individual capacitors
have on the circuit.
And it turns out that
there's a handy formula that
lets you determine the
equivalent capacitance.
The formula to find the
equivalent capacitance
of capacitors hooked up
in series looks like this.
1 over the equivalent
capacitance
is going to equal 1 over
the first capacitance
plus 1 over the second
capacitance plus 1
over the third capacitance.
And if you had more capacitors
that were in that same series,
you would just
continue on this way
until you've included
all of the contributions
from all of the capacitors.
We'll prove where this formula
comes from in a minute,
but for now, let's just
get used to using it
and see what we can figure out.
Using the values
from our example,
we get that 1 over the
equivalent capacitance
is going to be 1 over 4
farads plus 1 over 12 farads
plus 1 over 6 farads,
which equals 0.5.
But be careful.
You're not done yet.
We want the equivalent
capacitance, not
1 over the equivalent
capacitance.
So we have to take 1 over this
value of 0.5 that we found.
And if we do that, we get that
the equivalent capacitance
for this series of
capacitors is 2 farads.
Now that we've reduced our
complicated multiple capacitor
problem into a single
capacitor problem,
we can solve for the charge
stored on this equivalent
capacitor.
We can use the formula
capacitance equals charge
per voltage and plug in
the value of the equivalent
capacitance.
And we can plug in the
voltage of the battery
now because the voltage across
a single charged-up capacitor
is going to be the same as the
voltage of the battery that
charged it up.
Solving for the charge, we
get that the charge stored
on this equivalent
capacitor is 18 coulombs.
But we weren't trying to find
the charge on the equivalent
capacitor.
We were trying to
find the charge
on the leftmost capacitor.
But that's easy now
because the charge
on each of the individual
capacitors in series
is going to be the same as
the charge on the equivalent
capacitor.
So since the charge on
the equivalent capacitor
was 18 coulombs,
the charge on each
of the individual
capacitors in series
is going to be 18 coulombs.
This process can be
confusing to people,
so let's try another example.
This time, let's say you had
four capacitors hooked up
in series to a 24-volt battery.
The arrangement of
these capacitors
looks a little different
from the last example,
but all of these capacitors
are still in series
because they're hooked up
one right after the other.
In other words, the
charge has no choice
but to flow directly
from one capacitor
straight to the next capacitor.
So these capacitors are still
considered to be in series.
Let's try to figure
out the charge that's
going to be stored on
the 16-farad capacitor.
We'll use the same
process as before.
First we imagine replacing
the four capacitors
with a single
equivalent capacitor.
We'll use the formula
to find the equivalent
capacitance of
capacitors in series.
Plugging in our values, we
find that 1 over the equivalent
capacitance is going
to equal 0.125.
Be careful.
We still have to take
1 over this value
to get that the equivalent
capacitance for this circuit
is going to be 8 farads.
Now that we know the
equivalent capacitance,
we can use the
formula capacitance
equals charge per voltage.
We can plug in the value of
the equivalent capacitance, 8
farads.
And since we have a
single capacitor now,
the voltage across
that capacitor
is going to be the same as the
voltage of the battery, which
is 24 volts.
So we find that our imaginary
equivalent capacitor
would store a charge
of 192 coulombs.
This means that
the charge on each
of the individual capacitors is
also going to be 192 coulombs.
And this gives us our
answer, that the charge
on the 16-farad capacitor
is going to be 192 coulombs.
In fact, we can go even further.
Now that we know the
charge on each capacitor,
we can solve for
the voltage that's
going to exist across each
of the individual capacitors.
We'll again use the
fact that capacitance
is the charge per voltage.
If we plug in the values
for capacitor one,
we'll plug in a
capacitance of 32 farads.
The charge that capacitor
one stores is 192 coulombs.
So we can solve for the
voltage across capacitor 1,
and we get 6 volts.
If we were to do the
same calculation for each
of the other three capacitors,
always being careful that we
use their particular
values, we'll
get that the voltages
across the capacitors
are 2 volts across the
96-farad capacitor,
12 volts across the
16-fard capacitor,
and 4 volts across the
48-farad capacitor.
Now, the real reason I
had us go through this
is because I wanted to
show you something neat.
If you add up the voltages
that exist across each
of the capacitors,
you'll get 24 volts,
the same as the
value of the battery.
This is no coincidence.
If you add up the voltages
across the components
in any single-loop circuit like
this, the sum of the voltages
is always going to equal
the voltage of the battery.
And this principle
will actually let
us derive the formula we've
been using for the equivalent
capacitance of
series capacitors.
To derive this
formula, let's say
we've got three capacitors with
capacitances of C1, C2, and C3
hooked up in series to a
battery of voltage V. We now
know that if we add up the
voltage across each capacitor,
it's got to add up to the
voltage of the battery.
Using the formula
for capacitance,
we can see that the voltage
across an individual capacitor
is going to be the charge
on that capacitor divided
by its capacitance.
So the voltage
across each capacitor
is going to be Q over C1,
Q over C2, and Q over C3,
respectively.
I didn't write Q1, Q2,
or Q3 because remember,
all the charges on
capacitors in series
are going to be the same.
These voltages have to add up
to the voltage of the battery.
I can pull out a
common factor of Q
because it's in each
term on the left.
And now I'm going to
divide each side by Q.
I did that because
look at what we've
got on the right-hand
side of this equation.
The voltage across the battery
divided by the charge stored
is just equal to 1 over
the equivalent capacitance,
because Q over V is equal to
the equivalent capacitance.
And here it is.
This is the formula
we've been using,
and this is where it comes from.
It's derived from the
fact that the voltages
across these
capacitors in series
have to add up to the
voltage of the battery.