Computer Science Engineering (CSE) Exam  >  Computer Science Engineering (CSE) Notes  >  Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering

Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE) PDF Download

INTRODUCTION

 

The slides cover the following topics:

1. Evolution Of Cellular Systems

2. MULTIPLE ACCESS METHODS

3. Direct Sequence Spread Spectrum - DSSS CDMA

4. CDMA MODULATION

5. CDMA DEMODULATION

6. CDMA Network and System Architecture

7. CDMA CHANNELS IS-95

8.  SERVICES IN CDMA

9. CDMA COMPARED TO GSM

 

 

CDMA------------------------------------------------Next slide

 

CDMA (Code Division Multiple Access)

 

CDMA------------------------------------------------Next slide

 

Evolution Of Cellular Systems

 

• The advent of Cellular communications  began in 1940s known as MTS(Mobile Telephone Systems)
 
• There has been a gradual advancement in the capacity and signal strength.
 
• The development can be broadly divided into 3 categories namely first, second and third generations.
Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE)
 
CDMA------------------------------------------------Next slide
 
MULTIPLE ACCESS METHODS
 
There are predominantly three types of multiple access methods.
 

1.FDMA(Frequency Division Multiple Access)

2.TDMA(Time Division Multiple Access)

3.CDMA(Code Division Multiple Access)

 

CDMA------------------------------------------------Next slide
 

1. FDMA(Frequency Division Multiple Access)—

• With FDMA, frequencies are separated in the frequency domain, each user is allotted a different  set of frequencies to operate upon.
• Subscribers are assigned a pair of voice channels (forward and reverse) for the duration of the call.

2.TDMA(Time Division Multiple Access)—

In this system, each user is allocated a different time slot. Forward link frequency and reverse link frequency is the same. A synchronous switch is responsible for the time switching.

 

CDMA------------------------------------------------Next slide

 

3.CDMA(Code Division Multiple Access)—

 
• There is no restriction on time and frequency in this scheme.
 
• All the users can transmit at all times and at all     frequencies.
 
• Because users are isolated by code, they can share the same carrier frequency, eliminating the frequency reuse problem encountered in other  technologies.
 
• With CDMA, unlike other cellular telephone standards, subscriber data change in real time, depending on voice activity and requirements of the network and other users of the network.

 

CDMA------------------------------------------------Next slide

 

• A comparative study between the above three access technologies with respect to time and frequency is as shown below.

 

Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE)

 
CDMA------------------------------------------------Next slide
 
Direct Sequence Spread Spectrum - DSSS CDMA
 
• In this method, the direct sequence(input data) which is spread over a limited bandwidth is multiplied with a code or spreading sequence (a pseudorandom sequence also known as PN sequence).
 
• This will spread the input data over the entire bandwidth of the communication channel.
 
• The power density is also reduced and is spread over the frequency spectrum and hence is known as spread spectrum method.

 

CDMA------------------------------------------------Next slide

 

CDMA MODULATION

 

Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE)

 

CDMA------------------------------------------------Next slide

 

 CDMA DEMODULATION

• The modulated signal is transmitted over the channel and all users can receive it but only the user which knows the correct code can decode the message.

 

Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE)

 

CDMA------------------------------------------------Next slide

 

Evolution of CDMA network

 

• In 1984 Qualcomm Inc. proposed a cellular telephone system and standard based on spread spectrum technology which marked the advent of CDMA.
 
• Since then the evolution has been rapid as shown:
 
• IS-95 A ( 1995)
 
• IS-95B
 
• IS-95A as air-interface standard and IS-41 in core network; the complete network known as CdmaOne.
 
•CDMA 2000 1x -
 
•CDMA 2000 1x –EV-DO – data only 2.4 Mbps + RF backward compatible.

 

CDMA------------------------------------------------Next slide

 

Cellular Telephone System Topology

 

Base Station : The location of the transceivers are called base stations. A base station serves as central control for all the users within the cell.
 
Mobile Units: Such as automobiles and pedestrians carrying the mobile.
 
MTSO(Mobile Telephone and Switching Office): The mobile units and the base station communicate directly with the MTSO.
 
• An MTSO controls channel assignment, call processing, call setup, and call termination which include signaling, switching, supervision and allocating r.f. channel.

 

CDMA------------------------------------------------Next slide

 

CDMA Network and System Architecture

 

Mobile Stations:
 
• Mobile subscribers access the CDMA2000 1x data network using a mobile station, such as a mobile phone, modem, a laptop with an embedded CDMA2000 chip, a broadband access wireless router, or PC Card on a laptop computer.
 
• The mobile station interacts with the access network (AN) to obtain radio resources in order to exchange data packets. The mobile station, in tethered mode, can also act as a modem for a computer.
 
•The mobile station automatically registers with the network upon power-up, and upon successful registration, it is ready for voice and data calls.

 

CDMA------------------------------------------------Next slide

 

Access Network

 

• There are two types of access networks: 1xRTT and 1xEV-DO.
 
• The AN is the mobile station’s entry point into the mobile network .
 
• Maintains the communications link between the mobile station and the core network.
 
• The AN is composed of the following elements:
 
Base Transceiver Station
 
• It is physically composed of antennas and towers.
 
• The BTS manages radio resources including radio channel assignment and transmit and receive power management and acts as the interface to mobile stations.
 
Packet Control Function
 
• It maintains the “connection state” between the access network and mobile stations.
 
Radio Network Controller/Base Station Controller
 
• These schedule packet transmission on the air interface and manage handoffs between BTS`s

 

CDMA------------------------------------------------Next slide

 

Core Network

 

• The core network acts as the gateway between the access network and the Internet or enterprise private networks.
 
• It provides authentication, authorization, and accounting (AAA) services, provides access to network services, IP mobility, and manages IP addresses.
 
• The core network comprises the following elements:
 
PDSN/Foreign Agent
 
• The PDSN is the gateway between the access network and the core network.
 
AAA/Home Agent
 
• The AAA and the home agent (HA) are used for authentication, authorization, and accounting for data services. The AAA/HA stores and records usage and access information for billing and invoicing purposes.
 
CDMA------------------------------------------------Next slide
 

CDMA Channels  IS-95

 

FORWARD LINK CHANNELS

 
Pilot channel  – For initial system acquisition & to uniquely identify cell / sectors . Every sector of every cell site has a unique pilot channel.
 
Sync channel  - Subscriber  unit  with  network information related to cell site identification, pilot transmit power & cell site PN offset.
 
Paging channels  – Used by base  station to  page the   subs  unit   call  set-up  and  traffic channel assignment information.
 
Traffic Channels - The traffic channel carries the actual call, i.e, the voice and control information between the subs unit & base station.

 

CDMA------------------------------------------------Next slide
 

CDMA CHANNELS IS-95

 

Reverse Link Channels

Access Channel -Provides  communication  from  Mobile  to  base  station  when  mobile  is  not  using  traffic Channel.
 
Traffic channels - The traffic channel carries the actual call traffic in reverse channel also.
 
• In CDMA 2000 1x , in addition to above channels, Fwd. Quick paging channel ,Fwd. Supplemental channel , Rev. pilot channel , Rev. supplement channels are available.

 

CDMA------------------------------------------------Next slide

 

CDMA SPECIFICATIONS

 

 

1. Frequency of operation        : 824-849Mhz & 869-894 Mhz

2. Duplexing Method               : Frequency Division Duplexing

3. Access Channel per carrier: Maximum 61 Channels

4. RF Spacing:               -    1.25 Mhzs

5. Coverage:               - 5 Km with hand held telephones and approx. 20 Km with fixed units.

                     

• CDMA channel in the trans and receive direction is a FDD (Frequency Division Duplexing) channel.
 
• Frequency-division duplexing means that the transmitter and receiver operates at different carrier frequencies.

 

CDMA------------------------------------------------Next slide

 

CDMA SECURITY

 

• As wireless data networks become increasingly prevalent, new possibilities and challenges continue to emerge.
 
• Security becomes key to delivering solutions that meet today’s demand for mobility. Some of today’s top security issues and concerns are:
 
• Unauthorized systems and network access
 
• Auditability and compliance
 
• Customer data breaches
 
• Internal and external sabotage

 

CDMA------------------------------------------------Next slide

 

CDMA SECURITY BENEFITS

 

• The key inherent security benefits of CDMA technology can be summarized as:
 
• CDMA codes inherently spread the signals across the full channel bandwidth of 1.25 MHz.
 
• Soft handoff (multiple cells simultaneously supporting the call) typical for the CDMA operation make it very difficult to “follow” the CDMA cellular call.
 
• Long code mask (LCM) provides “built-in” security at the physical layer.
 
• CDMA signals are very difficult to intercept.
 
• CDMA attacks require sophisticated and expensive equipment.
 
• Access is only provided to authenticated mobile stations/subscribers.
 

CDMA------------------------------------------------Next slide

 

SERVICES IN CDMA

 

• Voice: In the form of calls made.
 
• SMS: It allows subscribers to send and receive short text messages between mobile stations .
 
• MMS: It allows for the transmission of images, audio, video, and rich text using WAP (wireless application protocol) technology and an MMS-capable mobile station.  
 
• Pocket data ( 144 kbps / 2.4 Mbps ) –NIC & EV-DO cards.
 
• Prepaid and Postpaid Services
 
• VPN(Virtual Private Network)
 
• Bank ATM / Branch ATM connectivity

 

CDMA------------------------------------------------Next slide

 

Billing and Customer Care System

 

Prepaid Services: The customer is charged for usage in the prior month (hence 'post' usage), and hence does not feature any limitations on volume of service used.
 
Postpaid Services: It asks customers to add a certain amount to their accounts prior to usage and their maximum usage is limited to the amount that is added to the account.
 
Customer service is a series of activities designed to enhance the level of customer satisfaction – that is, the feeling that a product or service has met the customer expectation.
 
• Many organizations have implemented feedback loops that allow them to capture feedback at the point of experience.
 
• The operators provide the user with one dial customer care services and supplement them by having offices in cities.

 

CDMA------------------------------------------------Next slide

 

CDMA COMPARED TO GSM

 

Technique Used-CDMA uses code division multiple access whereas GSM uses time division multiple access.
 
Power Consumption and Adjacent Channel Interference
 
Data Transfer Speed-CDMA has been traditionally faster than GSM, though both technologies continue to rapidly leapfrog along this path. Both boast "3G" standards, or 3rd generation technologies.
 
Subscriber Identity Module (SIM) cards and RUIM
 
CDMA------------------------------------------------Next slide
 
CONCLUSION
 
• In the age of growing connectivity CDMA plays a crucial role in bringing us closer.
 
• According to a survey CDMA networks support over 270 million subscribers worldwide.
 
• The techniques involved in it enable us to achieve the data transfer speeds of almost 3.1 mbps(EVDV cards).
 
• Future advancement in technology is going to take us to new heights in terms of capacities and facilities offered to customers.
The document Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE) is a part of Computer Science Engineering (CSE) category.
All you need of Computer Science Engineering (CSE) at this link: Computer Science Engineering (CSE)

Top Courses for Computer Science Engineering (CSE)

FAQs on Chapter - CDMA - Code Division Multiple Access, PPT, Semester, Engineering - Computer Science Engineering (CSE)

1. What is CDMA and how does it work?
Ans. CDMA stands for Code Division Multiple Access. It is a digital cellular technology that allows multiple users to share the same frequency channel simultaneously. CDMA uses a spread spectrum technique where each user's data is uniquely encoded with a specific code. This code separates the user's signal from other signals in the same frequency band, allowing multiple users to transmit and receive data simultaneously.
2. What are the advantages of CDMA over other cellular technologies?
Ans. CDMA offers several advantages over other cellular technologies. Firstly, it provides increased capacity by allowing multiple users to share the same frequency channel. Secondly, CDMA provides better voice quality and call clarity due to its ability to reject interference and noise. Additionally, CDMA has enhanced security features, making it difficult for unauthorized users to eavesdrop on conversations. CDMA also offers better coverage and signal penetration, especially in areas with obstacles or buildings.
3. How does CDMA handle interference and noise?
Ans. CDMA uses a technique called "spread spectrum" to handle interference and noise. Each user's data is spread over a wide frequency band using a unique code. When interference or noise is present, CDMA can still recover the original user's data by using error correction and detection algorithms. This allows CDMA to reject unwanted signals and maintain the integrity of the transmitted data.
4. Can CDMA support both voice and data communication?
Ans. Yes, CDMA can support both voice and data communication. It is a versatile technology that can accommodate various types of data, including voice, text messages, and internet browsing. CDMA networks can prioritize different types of data based on their requirements, ensuring efficient and reliable communication for users.
5. Is CDMA still widely used today?
Ans. While CDMA was widely used in the past, its popularity has decreased in recent years. Many countries have transitioned to newer cellular technologies like GSM or LTE. However, CDMA is still used in some regions and by specific network providers. It continues to offer certain advantages, such as better call quality and increased capacity.
Download as PDF
Explore Courses for Computer Science Engineering (CSE) exam

Top Courses for Computer Science Engineering (CSE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

mock tests for examination

,

practice quizzes

,

Viva Questions

,

ppt

,

Summary

,

PPT

,

PPT

,

Exam

,

Extra Questions

,

Semester

,

PPT

,

pdf

,

Previous Year Questions with Solutions

,

past year papers

,

Objective type Questions

,

Chapter - CDMA - Code Division Multiple Access

,

Semester Notes

,

shortcuts and tricks

,

MCQs

,

Engineering - Computer Science Engineering (CSE)

,

Semester

,

Chapter - CDMA - Code Division Multiple Access

,

Important questions

,

video lectures

,

study material

,

Engineering - Computer Science Engineering (CSE)

,

Semester

,

Sample Paper

,

Engineering - Computer Science Engineering (CSE)

,

Free

,

Chapter - CDMA - Code Division Multiple Access

;