Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev

Environmental Engineering - Notes, Videos, MCQs & PPTs

Computer Science Engineering (CSE) : Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev

The document Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev is a part of the Computer Science Engineering (CSE) Course Environmental Engineering - Notes, Videos, MCQs & PPTs.
All you need of Computer Science Engineering (CSE) at this link: Computer Science Engineering (CSE)

FUGITIVE EMISSIONS

  • Unintentional releases, such as those due to leaking equipment, are known as fugitive emissions 
  • Can originate at any place where equipment leaks may occur 
  • Can also arise from evaporation of hazardous compounds from open topped tanks 
  • Volatile organic compounds (VOCs) can be emitted from leaking valves, flanges, sampling connections, pumps, pipes and compressors.


SOURCES OF FUGITIVE EMISSIONS 

Agitator seals                   Loading arms  
 Compressor seals            Meters  
 Connectors                      Open-ended lines  
 Diaphrams                       Polished rods  
 Drains                              Pressure relief devices  
 Dump lever arms             Pump seals  
 Flanges                            Stuffing boxes  
 Hatches                           Valves  
 Instruments                     Vents 


MEASURING FUGITIVE EMISSIONS 

  • Portable gas detector 
  • Catalytic bead 
  • Non-dispersive infrared 
  • Photo-ionization detectors 
  • Combustion analyzers 
  • Standard GC with flame ionization detector is most commonly used 
  • Average emission factor approach 
  • Screening ranges approach 
  • EPA correlation approach 
  • Unit-specific correlation approach


CONTROLLING FUGITIVE EMISSIONS 

  • Modifying or replacing existing equipment 
  • Implementing a leak detection and repair (LDAR) program


Table 1 .9.1. Equipment Modification 

Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev
Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev
Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev


2. LDAR Programs 

  • Designed to identify pieces of equipment that are emitting sufficient amounts of material to warrant reduction of emissions through repair 
  • Best applied to equipment types that can be repaired on-line or to equipment for which equipment modification is not suitable 

 

WATER USE MINIMIZATION

  • Water is a critical resource for many economic activities. Even some of the activities can proceed without water.
  • It is necessary that use of water should be minimized not only in bigger economic activity but also in daily life so that these activities may be prolonged and water remains available for future generations also.  
  • Effective water management requires a coupling of production objectives, environmental impacts, and economic influences. 
  • Water Use Minimization involves a thorough evaluation of existing process operations, water utilization improvements, operational changes, plant-level design improvements, etc. 


IN-PLANT CONTROL TO MINIMIZE WATER POLLUTION 

The following in plant control measures are suggested to minimize the wastewater generation: 

  • Modification in the process
  • Optimum use of raw materials 
  • By-product recovery 
  • Maximum reuse of water 
  • Attitude of the management in reducing the pollution 
  • Proper operation and maintenance 
  • Local regulation regarding the water use and effluent quality 
  • Good house keeping 


PROCESS AND PRODUCT CHANGE

Process and product change is in fact a continuous process which is going on for last so many decades. The process of improvement in the product is basically user oriented. Cost effectiveness is also another factor that governs production criteria. 

Sustainable development of industry can be achieved by: 

(a) Product changes:  a. By designing so as to have less environmental impact b. Increased product life 

(b) Process Changes: It is of following three types: 

a. Material changes: Material  purification and substitution for lesser cost, toxicity and environmental effects

b. Technology changes: 

 i. Layout changes
 ii. Increased automation
 iii. Improved operating conditions
 iv. Improved equipment  
 v. New and cleaner technologies  

c. Operational changes

i. Operating and maintenance procedures
 ii. Management practices
 iii. Stream segregation
 iv. Material handling improvements
 v. Production scheduling
 vi. Inventory control
 vii. Waste segregation 


WATER SUPPLY SYSTEMS  

  • Water System Audits and Universal Metering: A water system audit quantifies how much water a system produces and purchases and where that water is going. The first step should include metering of all water-service connections.  
  • Leak Detection and Repair: Leak detection is a process to identify and repair water system leaks that are causing water loss. Leak detection methods range from visual inspection to using specialized leak detection equipment to find hidden leaks .  
  • Water Reuse: Highly treated wastewater can be used for many purposes, such as irrigation, dust control, and some industrial processes. 


BUSINESS AND INDUSTRIAL WATER USE 

  • Motivation of less water usage: Businesses and industries are motivated to use less water to reduce operating costs by lowering water bills. Cost savings comes from reduced water purchases, pumping expenses and wastewater treatment costs. 
  • Cooling Water: Cooling towers can consume 20% to 30% of the water used by commercial and industrial facilities.  
  • Fixture Replacement: Replacing faucets, toilets, showerheads, hose nozzles, and other water delivery devices with more efficient systems reduces the water use.  


BOILER WATER MINIMIZATION 

Boilers supply steam for process heating, space heating, power generation, etc. Boilers require makeup water to function; and generate wastewater as blow down. Boiler water minimization can be done by: 

  • High Purity Water Makeup: Pretreatment equipment such as reverse osmosis and demineralization allow the boiler to run at higher cycles of concentration. This results in lower makeup water and lower blow down rates and less energy consumption . 
  • Increase Condensate Return: The more condensate that can be returned to the boiler, the higher will be the number of cycles and less blow down, makeup, and heat energy will be required.
  • Eliminate Condensate Contamination: Perhaps the reason condensate isn’t being returned is condensate contamination. Condensate contamination is avoided, the conductivity would be higher. Higher the conductivity of water in a boiler, the lower the makeup and blow down rates and energy consumption.  
  • Water Chemistry: It is always a good practice to re-examine the boiler water chemistry. If the feed water quality has changed, this may directly impact the number of cycles the boiler can run. The impact may be positive or negative, but must be checked.  
  • Blow down Controller: Many boilers are manually blown down to control conductivity. With manual blow down, there are times when the conductivity is below the control range and times when it is above the control range. Automatically controlling the blow down on a boiler ensures the boiler runs within the set conductivity limits. This results in either water savings if the boiler was typically under cycled or improved steam quality if it was typically over cycled.
Offer running on EduRev: Apply code STAYHOME200 to get INR 200 off on our premium plan EduRev Infinity!

Dynamic Test

Content Category

Related Searches

pdf

,

Previous Year Questions with Solutions

,

past year papers

,

Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev

,

Objective type Questions

,

Exam

,

Semester Notes

,

shortcuts and tricks

,

mock tests for examination

,

video lectures

,

Extra Questions

,

practice quizzes

,

MCQs

,

Summary

,

Viva Questions

,

Free

,

Important questions

,

ppt

,

study material

,

Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev

,

Sample Paper

,

Fugitive Emission Control and Water Use Minimization Computer Science Engineering (CSE) Notes | EduRev

;