Q1: The electronic configuration of an element is 1S2 2S2 2P6 3S2 3P3. How many unpaired electrons are there in the element?
(a) 5
(b) 4
(c) 3
(d) 2
Ans: (c)
Q2: Which of the following can be obtained by fractional distillation?
(a) Nitrogen from liquid air
(b) Sodium Chloride from sea water
(c) Iodine from solution of Iodine in carbon tetrachloride
(d) Sulphur from the solution of sulphur in carbon disulphide
Ans: (a)
The Fractional Distillation of Liquid Air
Q3: Duralumin consists of aluminum, copper?
(a) Zinc and Gold
(b) Lead and Manganese
(c) Nickel and Silver
(d) Manganese and Magnesium
Ans: (d)
Duralumin is an alloy made up of 90% aluminium, 4% copper, 0.51% magnesium, and less than 1% manganese.
Q4: An example of a polysaccharide is?
(a) Dextrose
(b) Mannose
(c) Glucose
(d) Starch
Ans: (d)
A polysaccharide is a large molecule made of many smaller monosaccharides. Monosaccharides are simple sugars, like glucose. Special enzymes bind these small monomers together creating large sugar polymers, or polysaccharides. A polysaccharide is also called a glycan.
Q5: 8g of CH4 occupies 11.2 at S.T.P. What volume would 22g of CH3CH2CH3 occupy under the same condition?
(a) 3.7dm3
(b) 11.2dm3
(c) 22.4dm3
(d) 33dm3
Ans: (b)
Molar mass of methane, CH4 = 16g/mol
At standard conditions, S.T.P., 8g CH4 occupies 11.2
Hence, 16g occupies 22.4 dm3
Molar mass of propane = 44g/mol-1
occupies 22.4dm3. at S.T.P
Hence,
22g will occupy 11.2dm3
Q6: The best treatment for a student who accidentally poured conc tetraoxosulphate(vi) on his skin in the laboratory is to wash his skin with?
(a) with cool running water
(b) sodium hydroxide solution
(c) iodine solution
(d) sodium trioxonitrate(v) solution
Ans: (a)
The treatment: Flushed Sulfuric acid with a mild, soapy solution if the burns are not severe.
Note: Sulfuric acid feels hot when water is added to the acid, but it is better to flush the area and not leave the acid on the skin.
Warning: Don't try to neutralize the burn with acid or alkali. This could cause a chemical reaction that worsens the burn!
Q7: Which of the gas laws does this graph illustrate?
(a) Boyle
(b) Charles
(c) Gay-Lussac
(d) Graham
Ans: (b)
Charles' law states that the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature, if the pressure remains constant.
Q8: What are the possible oxidation numbers of an element if its atomic number is 17?
(a) -1 and 7
(b) -1 and 6
(c) -3 and 5
(d) -2 and 6
Ans: (a)
The element with atomic number 17 is Chlorine which has a valency of -1.
Hence, it needs to receive an electron or lose seven electrons to obey the octet rule which refers to the tendency of atoms to prefer to have eight electrons in the valence shell. When atoms have fewer than eight electrons, they tend to react and form more stable compounds
Q9: What process would coal undergo to give coal gas, coal tar, ammoniacal liquor and coke?
(a) Steam distillation
(b) Destructive distillation
(c) Liquefication
(d) Hydrolysis
Ans: (b)
Destructive distillation is a chemical process in which decomposition of unprocessed material is achieved by heating it to a high temperature; the term generally applies to the processing of organic material in the absence of air or in the presence of limited amounts of oxygen or other reagents, catalysts, or solvents, such as steam or phenols.
Q10: Liquid black soap is made by boiling palm oil with liquid extract of ash. The function of the ash is to provide the ?
(a) Acid
(b) Ester of alkanoic acid
(c) Alkali
(d) Alkanol
Ans: (c)
Sodium hydroxide, also known as lye and caustic soda, is an inorganic compound with the formula NaOH. It is a white solid ionic compound consisting of sodium cations Na? and hydroxide anions OH? .
Q11: When water drops are added to calcium carbide in a container and the gas produced is passed through a jet and lighted, the resultant flame is called an?
(a) Oxyethene
(b) Oxyhydrocarbon flame
(c) Oxyacetylene flame
(d) Oxymethane flame
Ans: (c)
The reaction of calcium carbide with water, producing acetylene and calcium hydroxide, was discovered by Friedrich Wöhler in 1862. This reaction was the basis of the industrial manufacture of acetylene and is the major industrial use of calcium carbide.
Q12: Which of the following substances is a mixture?
(a) Granulated sugar
(b) Seawater
(c) Sodium chloride
(d) Iron filling
Ans: (b)
In chemistry, a mixture is a material made up of two or more different substances which are not chemically combined. A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.
Examples include Air, Soil, Palm oil, Seawater, Blood, Crude oil, etc
Q13: If the quantity of oxygen occupying 2.76L container at a pressure of 0.825 atm and 300k is reduced by one-half, what is the pressure exerted by the remaining gas?
(a) 1.650atm
(b) 0.825atm
(c) 0.413atm
(d) 0.275atm
Ans: (a)
Using the combined gas law formula,
Given that P1 = 0.825, V1 = 2.76 L, V2 = 1.38 L, P2 = ?
And T1 = T2; we would have P2
= [ P1 x V1 ] ÷ V2
: [0.825 x 2.76] ÷ 1.38
= 1.650atm
Q14: Four elements P, Q, R and S have atomic numbers of 4, 10, 12 and 14 respectively. Which of these elements is noble gas?
(a) P
(b) Q
(c) R
(d) S
Ans: (b)
They are the most stable because they have the maximum number of valence electrons their outer shell can hold.
Hence, they rarely react with other elements since they are already stable.
Q15: The products of the thermal decomposition of ammonium trioxonitrate(v) are?
(a) Nitrogen (I) Oxide and Water
(b) Ammonia and Oxide
(c) Nitrogen and Water
(d) Nitrogen (IV) Oxide and Water
Ans: (a)
NH4NO3 Ammonium Trioxonitrate(V) , unlike all other metallic trioxonitrates(v), decomposes on heating to give nitrogen(i)oxide N2O and water.
Q16: How many valence electrons are contained in the element ?
(a) 3
(b) 4
(c) 15
(d) 31
Ans: (a)
The element is Phosphorus in group 5 with valencies of 3 and 5. These are contained in the third energy level of the atom. Due to the number of valence electrons, Phosphorus is capable of forming three bonds with other elements.
Q17: The number of molecules of Carbon(iv)Oxide produced when 10.0g of CaCO3 is treated with 0.2dm of 1 Mole of HCL in the equation CaCO3 + 2HCL ? CaCl2 + H2O + CO2 , is ?
(a) 1.00 X 1023
(b) 6.02 X 1023
(c) 6.02 X 1022
(d) 6.02 X 1024
Ans: (c)
1 mole of CaCO3 = 100g or 6.02 X 1023
liberated 1 mole of CO2 or 44g or 6.02 X 1023
:100g = 6.02 X 1023
10g of CaCO3 = x
cross multiply
[10g X 6.02 X 1023] / 100g = x
⇒ x = 6.02 X 1022
Since
6.02 X 1023 of CaCO3 liberated 6.02 X 1023 of CO2
⇒ 6.02 X 1022 of CaCO3 will liberate 6.02 X 1022 of CO2
Q18: The volume occupied by 1.58g of a gas at S.T.P is 500cm3. What is the relative molecular mass of the gas? [ G.M.V at S.T.P = 22.4dm3 ]
(a) 28
(b) 32
(c) 44
(d) 74
Ans: (d)
500cm3 of the gas weighed 1.58
22400cm3 of the gas weight: [22400 X 1.58g] ÷ [ 500 ]
= 74
Q19: Which of the following gases will rekindle a brightly splint?
(a) NO2
(b) NO
(c) N2O
(d) CL2
Ans: (c)
Nitrogen(I)Oxide rekindles a brightly glowing splinter but extinguishes a feebly glowing one which is not hot enough to decompose the gas to liberate oxygen
Q20: The shape of ammonia molecule is?
(a) Trigonal planar
(b) Octahedral
(c) Square planar
(d) Tetrahedral
Ans: (a)
The ammonia molecule has a trigonal pyramidal shape with three hydrogen atoms and an unshared pair of electrons attached to the nitrogen atom. It is a polar molecule and is highly associated because of strong intermolecular hydrogen bonding.
Q21: A few drop of conc HCL are added to about 10cm of a solution of PH 3.4. The PH of the resulting mixture is?
(a) less than 3.4
(b) greater than 3.4
(c) unaltered
(d) the same as that of the pure water
Ans: (a)
The addition of conc HCL makes the solution more acidic and the solution falls below the original value
Q22: Chromatography is used to separate components of mixture which differ in their rates of ?
(a) diffusion
(b) migration
(c) reaction
(d) sedimentation
Ans: (b)
Chromatography is a method of separating mixtures by using a moving solvent on filter paper.
It is a laboratory technique for the separation of a mixture. The mixture is dissolved in a fluid called the mobile phase, which carries it through a system on which is fixed a material called the stationary phase. Wikipedia
Q23: Deliquescent substances are also?
(a) efflorescent
(b) anhydrous
(c) hygroscopic
(d) insoluble
Ans: (c)
Deliquescence is the process by which a substance absorbs moisture from the atmosphere until it dissolves in the absorbed water and forms a solution. Deliquescence occurs when the vapour pressure of the solution that is formed is less than the partial pressure of water vapour in the air.
Q24: Helium is used in observation of ballons because it is?
(a) Light and combustible
(b) light and non-combustible
(c) heavy and combustible
(d) heavy and non-combustible
Ans: (b)
Helium floats because it is buoyant;
The molecules in Helium are lighter than the nitrogen and oxygen molecules of our atmosphere and so they rise above it
Q25: 32g of anhydrous copper(ii)tetraoxosulphate(vi) dissolved in 1dm of water generated 13.0kj of heat. The heat solution is?
(a) 26.0kj/mol
(b) 65.0kj/mol
(c) 130.0kj/mol
(d) 260.0kj/mol
Ans: (b)
32g of CUSO liberate 13.0kj of heat
Molar mass of CUSO4 = 160g
No. of moles of CUSO4 = 32g
No. of moles = 32(mass) / 160(molar mass)
= 0.2 moles
i.e 0.2 = 13kj
1 moles = xkj
= 65KJ
Q26: A gaseous metallic chloride MCl consists of 20.22% of M by mass. The formula of the chloride is? [ M = 27, Cl = 35.5]
(a) MCl
(b) MCl2
(c) MCl3
(d) M2Cl6
Ans: (c)
Which gives formula of the Chloride = MCl3
Q27: What quantity of electricity will liberate 0.125 mole of oxygen molecules during the electrolysis of dilute sodium chloride solution?
(a) 24,125 C
(b) 48,250 C
(c) 72,375 C
(d) 96,500 C
Ans: (b)
4OH ⇒ 2H2O + O + 4e- ........ (i)
From equation (i):
1 mole of Oxygen requires 4e
i.e 1 mole of Oxygen requires 4F,
where 1F = 96,500 C
[ 4 x 96,500 x 0.125 ] ÷ 1
= 48,250 C
Q28: Which of the following types of bonding does not involve the formation of new substances?
(a) Metallic
(b) Covalent
(c) Co-ordinate
(d) Electrovalent
Ans: (a)
In metallic bonding, the valence electrons of metal atoms are delocalized and form a "sea" of electrons that are free to move throughout the metal lattice. This creates a bond between the metal ions and the delocalized electrons, resulting in the characteristic properties of metals such as conductivity, malleability, and ductility.
Q29: An organic compound that does not undergo a reaction with both hydrogen cyanide and hydroxylamine can be?
(a) Alkene
(b) Alkanal
(c) Alkanone
(d) Alkanoic Acid
Ans: (c)
The addition of hydrogen cyanide to a carbonyl group of an aldehyde or most ketones produces a cyanohydrin.
Sterically hindered ketones, however, don't undergo this reaction. Aldehydes and ketones react with primary amines to form a class of compounds called imines, however, Imines of aldehydes are relatively stable while those of ketones are unstable.
Q30: The substance often used for vulcanization of rubber is?
(a) Chlorine
(b) Hydrogen peroxide
(c) Sulphur
(d) Tetraoxosulphate(vi) acid
Ans: (c)
Vulcanization of rubber is among the several uses of sulfur
Q31: The chlorinated alkane often used industrially to remove grease is?
(a) Tetrachloromethane
(b) Chloromethane
(c) Trichloromethane
(d) Dichloromethane
Ans: (a)
Tetrachloromethane is an effective solvent within the chemical industry and is used to clean machinery and electrical equipment. That is to say that it functions as a solvent for oils, fats, lacquers, varnishes, rubber waxes, and resins, and as a grain fumigant.
Q32: What mass of water is produced when 8.0g of hydrogen reacts with excess oxygen?
(a) 8.0g
(b) 16.0g
(c) 36.0g
(d) 72.0g
Ans: (d)
2H2 + O2 ⇒ 2H2O
From the equation:
4g of Hydrogen produces 36g of water
8g of Hydrogen will produce 72g of water
Q33: Proteins in acid solution undergo?
(a) Substitution
(b) Fermentation
(c) Hydrolysis
(d) Polymerisation
Ans: (c)
Acid hydrolysis refers to a hydrolysis reaction occurring under acidic conditions. Acid hydrolysis of a protein breaks the polymer down into its constituent amino acids.
In organic chemistry, acid hydrolysis is a hydrolysis process in which a protic acid is used to catalyze the cleavage of a chemical bond via a nucleophilic substitution reaction, with the addition of the elements of water. For example, in the conversion of cellulose or starch to glucose.
Q34: The general formula for the Alkanals is?
(a) R2CO
(b) RCHO
(c) ROH
(d) RCOOR
Ans: (b)
Alkanals (Aldehydes) have the general formula RCHO while Alkanones or Ketones have the general formula RCOR'.
Where R and R' may be alkyl or aryl groups.
Q35: When cathode rays are deflected onto the electrode of an electrometer, the instrument becomes?
(a) Bipolar
(b) Negatively charged
(c) Positively charged
(d) Neutral
Ans: (c)
When these cathode rays are deflected onto an electrode of an electrometer, the instrument measured a negative charge. The rays tested also were deflected by the application of an electric field.
Q36: When a solid substance disappears completely as a gas on heating, the substance is said to have undergone?
(a) Sublimation
(b) Crystallization
(c) Distillation
(d) Evaporation
Ans: (a)
Sublimation is the transition of a substance directly from the solid to the gas state, without passing through the liquid state
Q37: An electron can be added to a halogen atom to form a halide ion with?
(a) 8 valence electrons
(b) 7 valence electrons
(c) 2 valence electrons
(d) 3 valence electrons
Ans: (a)
A halide ion is a halogen atom bearing a negative charge. The halide anions are fluoride (F-), chloride (Cl-), bromide (Br-), iodide (I-) and astatide (At-). Such ions are present in all ionic halide salts. Halide minerals contain halides.
Q38; Aluminum hydroxide is used in the dyeing industry as a?
(a) Dye
(b) Dispersant
(c) Salt
(d) Mordant
Ans: (d)
Aluminium hydroxide, Al(OH)? is used as a mordant in dyeing.
Q39: The most important element on the earth's crust is?
(a) Nitrogen
(b) Hydrogen
(c) Oxygen
(d) Fluorine
Ans: (c)
Oxygen, O2, is by far the most abundant element in earth's crust at 46.6 percent, nearly half of the mass of the crust.
Q40: To obtain pure carbon(ii)oxide from its mixture with carbon(iv)oxide, the mixture should be?
(a) Passed over heated copper(ii)oxide\
(b) Bubbled through water
(c) Bubbled through conc H2SO4
(d) Bubbled through conc NAOH
Ans: (d)
Carbon monoxide, that is Carbon(ii)oxide is prepared from carbon(iv)oxide by passing the latter through red-hot carbon and the unchanged CO2 is removed when the mixture of the gases through conc NAOH.
214 videos|199 docs|162 tests
|
|
Explore Courses for JAMB exam
|