Courses

# Past Year Questions: Limits, Fits, and Tolerances Mechanical Engineering Notes | EduRev

## Mechanical Engineering : Past Year Questions: Limits, Fits, and Tolerances Mechanical Engineering Notes | EduRev

The document Past Year Questions: Limits, Fits, and Tolerances Mechanical Engineering Notes | EduRev is a part of the Mechanical Engineering Course Manufacturing and Industrial Engineering.
All you need of Mechanical Engineering at this link: Mechanical Engineering

Question 1:In an interchangeable assembly, shafts of size mm mate with holes of size mm. The maximum possible clearance in the assembly will be

[ME 2004]

Question 2:The dimensional limits on a shaft of 25h7are

[ME 2003]

Question 3:Allowance in limits and fits refers to

[ME 2001]

Question 4:The fit on a hole-shaft pair system is specified as H7-h6, the type of fit is

[ME 1996]

Question 5:A shaft of diameter mm and a hole of diameter mm when assembled would yield

[ME 1993]

Question 6:Two shafts A and B have their diameters specified as 100 ± 0.1 mm and 0.1 ± 0.0001 mm respectively. Which of the following statements is/are true

[ME 1992]

Question 7:A bush was turned after mounting the same on a mandrel. The mandrel diameter in millimeters is  and bore diameter of bush is The maximum eccentricity of the bush in mm will be

[ME 1991]

Question 8:In an engineering drawing one finds the designation of 20G7f8, the position of tolerance of the hole is indicated by

[ME 1988]

Question 9:The hole and shaft, when assembled will result in

[ME 1987]

Offer running on EduRev: Apply code STAYHOME200 to get INR 200 off on our premium plan EduRev Infinity!

## Manufacturing and Industrial Engineering

91 videos|52 docs|59 tests

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

,

;