Class 9 Exam  >  Class 9 Notes  >  Advance Learner Course: Science Class 9  >  Physical Properties of Metals & Non-metals

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9 PDF Download

There are more than 115 elements known, at present 80% of these elements are metals and rest are non-metals. On the basis of their characteristic properties, all of these elements are divided into two main groups: Metals and non-metals.


Position of Metals and Non-metals in the Periodic Table

  • The elements which are placed on the left-hand side (except hydrogen) and in the centre of the periodic table are called metals. Such as sodium, potassium, magnesium, calcium, iron, copper-zinc etc.
  • The elements which are placed on the right-hand side of the periodic table are called non-metals such as oxygen, nitrogen, chlorine, fluorine etc. 
  • These metals and non-metals are separated from each other in the periodic table by a zig-zag line. 

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9

  • The elements placed in the zig-zag line show some properties of metals and some properties of non-metals are called metalloids.
  • Such as boron(B), silicon(Si), germanium(Ge), arsenic(As), antimony(Sb), tellurium(Te) and polonium(Po).

The position of metals, non-metals and metalloids are shown in a simple form in figure.

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9


  • Metals present at the extreme left are known as light metals, while those present in the centre of the periodic table are called heavy metals or transition metals.
  • The elements at the extreme left of the periodic table are most metallic and those on the right are least metallic or non-metallic.
  • Thus, the metallic character decreases on going from left to right side in the periodic table. 
  • For example, sodium is more metallic than aluminium because sodium is on the left-hand side of the aluminium.
  • However on going down in a group the metallic character increases. For example, carbon is non-metal while lead is metal because metallic character increases down in a group.

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9


Metals

The elements which can be polished, drawn into wires (ductile), hammered into sheets (malleable) and a good conductor of heat and electricity are called metals. Such as gold, silver and aluminium. Al is the most abundant metal in the earth's crust.

Electronic View of Metal

An element is called metal, which forms positive ions (or cations) by losing an electron.

Electronic View of MetalElectronic View of Metal

  • Sodium is a metal that forms sodium ion (Na+) by losing one electron.
  • Similarly, magnesium metal forms Mg2+ by losing two electrons, Al metal forms Al3+ by loss of three electrons.
  • Thus, metals are also known as electropositive elements.
  • The atoms of metals have 1 to 3 electrons in their outermost shell. For example, all alkali metals have one electron in their outermost shell. (Lithium-2, 1, sodium 2, 8, 1, potassium-2, 8, 8, 1, ... etc).
  • Sodium(11) (2,8,1) magnesium(12) (2,8,2) and aluminium(13) (2, 8, 3) are metals having 1, 2 and 3 electrons respectively in their outermost shell, which lose these electrons easily. 
  • The number of electrons lost by an atom of a metal is called its valency.
  • Thus metals have 1 to 3 electrons in their valence shell of their atoms.

Exceptions: Hydrogen and Helium. Hydrogen is a non-metal having 1 electron in its outermost shell of its atom. Helium ha 2 electrons in its outermost shell of its atom. 

Physical Properties of Metals


The important physical properties of metals are given below: 

Physical State of Metals

Most of the metals are solid under normal conditions of temperature and pressure (Except mercury which exists in a liquid state at room temperature). For example, Iron, Copper, Aluminium, Zinc, Sodium are solid at room temperature.

Physical state different properties to the original metalPhysical state different properties to the original metal

Hardness of Metals

Most of the metals are hard, but all metals are not equally hard. The hardness of metals varies from metal to metal.
Example: Iron, Copper, Aluminium, Sodium and Potassium.


Malleability of Metals

The property in which metals can be beaten with a hammer into very thin sheets without breaking is called malleability. Gold and silver are the best malleable metals. 

Malleable Metal GoldMalleable Metal Gold

Aluminium and copper are also highly malleable metals. All of these metals can be beaten with a hammer to form very thin sheets, called a foil. 


Activity-1.1


Aim:

To show that the metals are malleable. 

Procedure: 

Take an iron nail, a piece of zinc, copper, coal, aluminium, place all of the above one by one on a block of iron and strike it 4 and 5 times with a hammer.

Observation:

1. Iron nail, aluminium, copper & zinc metals change their shape into thin sheets.

2. Coal is broken into small pieces. i.e. it is not a metal, because it does not show the property of malleability.

Conclusion:

1. Zinc, Fe, Al, Cu, are malleable i.e. they are metals.

2. Coal is non-metal.


Lustre of Metals

Most of the metals, in their pure state, have a shining surface. This property is called metallic lustre. Example, gold is shining yellow and copper is brown, iron, aluminium and zinc are lustrous grey.


Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9




Activity-1.2

Aim: 

To show that metals have shine or brightness. Take a small piece of iron, copper, aluminium and magnesium. Now clean their surface by rubbing them with a sand paper.

Observation:

Iron is shining grey in colour, magnesium and aluminium appear white, gold is yellow in colour and copper is reddish in colour.

Result: 

Thus metals have shine or brightness.


Ductility of Metals

Ductility is also an important property of metals. The ability of metals to be drawn (stretched) into thin wires is termed as ductility. 

DuctilityDuctility

  • Examples of ductile metals are wires made up of iron, copper and aluminium. Gold and silver are the most ductile metals.
  • For example, 100 mg of silver can be drawn into a thin wire of about 200 metres long.
  • Similarly we can draw a wire of about 2 kilometre from only 1 gm of gold. Copper and aluminium are also very ductile, and therefore, they can be drawn into thin wires which are used in electrical wiring. 
  • We are familiar with silver foil used for decorating sweets and aluminium foil are used for wrapping food.

Thermal Conductivity of Metals

The process in which a metal allows the flow of heat through it is called its thermal conductivity. Most of metals are good conductors of heat, such as silver, gold, iron, copper and aluminium. Silver and copper are the best conductor of heat.

Thermal conductivity of metalsThermal conductivity of metals

Activity-1.3


Aim:

To show that metals are good conductor of heat.


Procedure: 

Take a metal rod and place its one end in hot water.


Observation: 

The other end also gets heated soon.


Result: 

This shows that metals are good conductors of heat.


Activity-1.4

Procedure:

Take a small wire and clamp it on a stand as shown in the figure below. Then fix a pin to the free end of the wire with the help of wax. Now heat the copper wire with a candle or burner near its clamped end.

Observation: 

After some time the other end will also become hot and wax will melt and nail will fall down.

Result: 

This shows that metals are good conductors of heat. This experiment also shows that metal wire does not melt. i.e. metals have high melting points. Repeat this activity with aluminium & iron metal. 


Metals conduct heat when a portion of an object made of metal is heated, its atoms gain energy. The energetic atoms vibrate vigorously and transfer energy to the other adjacent atoms. In this way the entire object and anything in its contact also become hot.


Electrical Conductivity of Metals

The property in which metal facilitates the flow of electric current through it is called electrical conductivity. All metals are good conductors of electricity because they contain free or mobile electrons. These free electrons conduct electric current. Silver is the best conductor of electricity. Since silver is expensive, therefore, copper and aluminium are commonly used for making electric wires. These metals are next best conductor of electricity.
However, iron and mercury offer greater resistance to the flow of current. Therefore, they have low electrical conductivities.


Activity-1.5

Aim: 

To show that metal is a good conductor of electricity.


Procedure: 

Take a dry cell, a bulb fitted in a holder, connecting wires (copper wire), crocodile clips and a switch. Set up all apparatus an electric circuit as shown in figure.

Apparatus for the experimentApparatus for the experiment

Observation: 

The bulb glows at once when switch is on

.
Result: 

This shows that copper metal conducts electric current, i.e. it is a good conductor of electricity.


Sonorous

The property of metals in which metals produce sound when they strike a hard object or other surface are called sonorous. Some metals like copper, silver, gold, aluminium give musical sound when they are struck by themselves or any other object. 


Uses of Some Metals

Many metals and their compounds are useful in our daily life. These are as follows: 

  • Aluminium is used to prepare utensils and household equipment like a vacuum cleaner. Aluminium is extensively used in making bodies of rail, cars, automobiles, trucks and aircraft. Aluminium wires are widely used in electrical work. Aluminium foil is used to wrap chocolate and medicines and to seal milk bottles.
  • The major use of copper is in making electrical wires. Copper is also used in making utensils, steam pipes, coin and electroplating.
  • Steel is an alloy of iron which is used for making parts of machines, as a building material and in the construction of fridges. As a matter of fact, steel is said to be the backbone of the industry.
  • Gold and silver called noble metals (or coinage metals) are used in jewellery.
  • Mercury is used in thermometers barometers and to prepare amalgams.
  • Platinum is used to make crucibles and electrodes.
  • Zinc is used to galvanize iron, to prepare roofing material, a container of dry cells and to make brass when mixed with copper.
  • Metal like sodium, titanium and zirconium find their applications in atomic energy and space science projects.
  • Titanium (Ti) and its alloys are used in aerospace, marine equipments, aircraft frames, chemical industries and chemical reactors. The wide application of titanium is attributed to its resistance to corrosion, high melting points and high strength.
  • The metals such as titanium, chromium, manganese and zirconium are called strategic metals because these metals play an important role in the country's economy and defence. These metals and their alloys are used in high grade steels, jet engines, space science projects and atomic energy.
    Rare earth and strategic metal
    Rare earth and strategic metal


Non-metals and their General Properties


Non-metals are present on the right-hand side of the periodic table (exception: Hydrogen). Among the total known elements, there are only 22 non-metals, out of which 11 are gases like oxygen, nitrogen, hydrogen one is a liquid (Bromine) and the rest 10 are solids such as sulphur, phosphorus and the allotropes of carbon (Diamond and graphite).


Electronic View of Non-metals

An element is called a non-metal which form ions by gaining electrons. For example, oxygen is a non-metal that form O2- ions by gaining two electrons. Similarly, nitrogen form N3– ions by gaining three electrons.
Thus, non-metals also known as electronegative elements.
The atoms of non-metals have usually 4 to 8 electrons in their outer most shell. For example, Carbon (At No. 6), Nitrogen (At. No. 7), Oxygen (At. No. 8), Fluorine (At. No. 9) and Neon (At. No. 10), have respectively 4, 5, 6, 7 and 8 electrons in their outermost shell. However, there are two exceptions namely hydrogen and helium which have one and two electrons in their valence shell or outer most shell, but they are non-metals.

Physical Properties of Non-metals

The important physical properties of non-metals are given below :
1. Non-metals may be solids, (such as sulphur, phosphorus and diamond), liquid (Bromine), or gases (such as oxygen, nitrogen, hydrogen, neon, argon, etc.) at room temperature.
2. Non-metals are usually brittle and cannot be used to make sheets and wires.
3. Non-metals are non lustrous and cannot be polished. (Exception: Graphite and iodine are lustrous nonmetals).
4. Non-metals are generally bad conductor of heat and electricity.

ExceptionGraphite which is a good conductor of electricity. Non-metals do not conduct the electric current due to absent of free or mobile electrons.

Graphite, a good conductor of electricityGraphite, a good conductor of electricity 5. Non-metals can be easily broken due to its low tensile strength.
6. Non-metals are generally light and have low densities.
7. Unlike metals, non-metals do not produce any sound when struck with an object.
8. Non-metals are soft (Exception: Diamond)
9. Non-metals have low melting and boiling points. (Exception: Graphite has very high melting point (3730°C))


Exceptions in Physical Properties

On the basis of the above discussion of the physical properties of metals and non-metals, we have concluded that elements can not be grouped according to the physical properties alone, as there are many exceptions. 

  1. All metals except mercury are solids at room temperature. 
  2. Lead and mercury are poor conductors of heat.
  3. Mercury expands significantly for the slightest change in temperature.
  4. We know that metals have very high melting points but  gallium (Ga) and caesium (Cs) have very low melting points. These two metals will melt if we keep them on our palm.
  5. Iodine is a non-metals but it is lustrous.
  6. Alkali metals such as Lithium, Sodium and Potassium are soft, so, that they can be easily cut with a knife. i.e.,  they have low densities and low melting points.
  7. Carbon is a non-metal that can exist in different forms. Each form is called an allotrope Diamond, an allotrope  of carbon is the hardest natural substance. which has very high melting and boiling point. 
  8. Graphite is another  allotrope of carbon which is good conductor of electricity.
The document Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9 is a part of the Class 9 Course Advance Learner Course: Science Class 9.
All you need of Class 9 at this link: Class 9
11 videos|50 docs|17 tests

Top Courses for Class 9

FAQs on Physical Properties of Metals & Non-metals - Advance Learner Course: Science Class 9

1. What are the physical properties of metals?
Ans. Metals generally have high melting and boiling points, are good conductors of heat and electricity, are malleable and ductile, and have a shiny appearance.
2. What is the aim of Activity-1.1?
Ans. The aim of Activity-1.1 is not specified in the given article.
3. What are some common uses of metals?
Ans. Metals are used in various industries for purposes such as construction (steel, aluminum), electrical wiring (copper), transportation (iron, aluminum), and manufacturing of tools and machinery.
4. What are the general properties of non-metals?
Ans. Non-metals typically have low melting and boiling points, are poor conductors of heat and electricity, are brittle, and have a dull appearance.
5. What is the significance of the position of metals and non-metals in the periodic table?
Ans. The position of metals and non-metals in the periodic table provides information about their chemical properties, reactivity, and atomic structure. It helps in understanding their behavior and predicting their chemical reactions.
11 videos|50 docs|17 tests
Download as PDF
Explore Courses for Class 9 exam

Top Courses for Class 9

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Extra Questions

,

Viva Questions

,

pdf

,

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9

,

Exam

,

ppt

,

video lectures

,

study material

,

Objective type Questions

,

practice quizzes

,

Important questions

,

past year papers

,

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9

,

Free

,

shortcuts and tricks

,

mock tests for examination

,

Summary

,

Sample Paper

,

Semester Notes

,

MCQs

,

Previous Year Questions with Solutions

,

Physical Properties of Metals & Non-metals | Advance Learner Course: Science Class 9

;