Civil Engineering (CE) Exam  >  Civil Engineering (CE) Notes  >  Short Notes for Civil Engineering  >  Short Notes: Displacement Method of Analysis (Moment Distribution Method)

Short Notes: Displacement Method of Analysis (Moment Distribution Method) | Short Notes for Civil Engineering - Civil Engineering (CE) PDF Download

Download, print and study this document offline
Please wait while the PDF view is loading
 Page 1


 
 
DISPLACEMENT METHOD OF ANALYSIS (MOMENT DISTRIBUTION METHOD) S 
1. INTRODUCTION 
It is a displacement method for analysis of statically indeterminate beams and frames 
developed by Hardy Cross. The method only accounts for flexural effects and ignores axial and 
shear effects. In this method it is assumed in the beginning that all joints of the structure are 
fixed. Then by locking and unlocking each joint in succession, the internal moments are 
distributed such that each joint attains its final position. 
2. IMPORTANT DEFINITIONS   
2.1. Stiffness Factor 
Stiffness factor can be defined as the moment required to produce unit rotation in the beam. 
Stiffness factor for various cases is defined as follows. 
Case 1: Far end is fixed 
 
==
4EI
Stiffness factor s
l
 
Case 2: Far end is hinged 
 
??????????????????  ????????????   =  ??   =
3????
?? 
2.2. Relative stiffness (k) 
Relative stiffness is the relative value of the stiffness factor. It is value for various cases can be 
expressed as follows. 
 
Case 1: Far end is fixed 
=
I
k
L
 
 
 
Case 2: Far end is hinged 
=
3I
k
4L
 
Case 3: Far end is free 
K = 0 
Page 2


 
 
DISPLACEMENT METHOD OF ANALYSIS (MOMENT DISTRIBUTION METHOD) S 
1. INTRODUCTION 
It is a displacement method for analysis of statically indeterminate beams and frames 
developed by Hardy Cross. The method only accounts for flexural effects and ignores axial and 
shear effects. In this method it is assumed in the beginning that all joints of the structure are 
fixed. Then by locking and unlocking each joint in succession, the internal moments are 
distributed such that each joint attains its final position. 
2. IMPORTANT DEFINITIONS   
2.1. Stiffness Factor 
Stiffness factor can be defined as the moment required to produce unit rotation in the beam. 
Stiffness factor for various cases is defined as follows. 
Case 1: Far end is fixed 
 
==
4EI
Stiffness factor s
l
 
Case 2: Far end is hinged 
 
??????????????????  ????????????   =  ??   =
3????
?? 
2.2. Relative stiffness (k) 
Relative stiffness is the relative value of the stiffness factor. It is value for various cases can be 
expressed as follows. 
 
Case 1: Far end is fixed 
=
I
k
L
 
 
 
Case 2: Far end is hinged 
=
3I
k
4L
 
Case 3: Far end is free 
K = 0 
 
 
2.3. Distribution Factor 
It is the ratio in which the applied moment is distributed to various members meeting at 
a rigid point. Sum of distribution factor of all members meeting at a rigid joint is one. If 
far end is free, its D, k and distribution factor is zero. 
???? =
?? S?? 
Where, 
K = Relative stiffness of the member 
?K = Summation of relative stiffness of all members meeting at a joint 
2.4. Carry over moment 
It is the moment developed at one end due to applied moment at the other end. It is 
developed to make the slope zero. It is exerted by the fixed support on the beam. It is 
developed to make slope zero not to keep the structure in equilibrium. Various case for 
carry over moment are as follows. 
Case 1: Far end is fixed 
=
M
COM
2
 
Case 2: Far end is hinged 
COM = 0 
2.5. Carry Over Factor 
Carry over factor can be defined as the ratio of carry over moment and applied moment. 
Carry over factor for various cases can be given as follows. 
Case 1: Far end is fixed 
==
M1
COF
2 2
M
 
Case 2: Far end is hinged 
?????? =
0
?? = 0 
3. ANALYSIS OF BEAMS USING MOMENT DISTRIBUTION METHOD 
3.1. Sign convention 
(i) Clockwise end moments and clockwise rotations are taken as positive. Anti-clockwise 
end moments and anti-clockwise rotations are taken as negative. 
(ii) Bending moment which is sagging in nature are taken as positive and hogging 
bending moment is taken as negative. 
3.2. Procedure 
Step 1: Find out Distribution factors and fixed end moments. 
Step 2: Assume all joints to be initially locked. Then Determine the moment needed to 
bring each joint in equilibrium. Release the joints and distribute the counterbalancing 
moment into the connecting span at each joint. Carry these moments in each span over 
to its other end.  
Repeat the same cycle until the moment equilibrium at the joint achieved. 
. 
 
Read More
102 docs

Top Courses for Civil Engineering (CE)

FAQs on Short Notes: Displacement Method of Analysis (Moment Distribution Method) - Short Notes for Civil Engineering - Civil Engineering (CE)

1. What is the Displacement Method of Analysis?
Ans. The Displacement Method of Analysis, also known as the Moment Distribution Method, is a structural analysis technique used to determine the moments at the ends of each member in a structure by considering the relative stiffness of the members.
2. How does the Displacement Method work in structural analysis?
Ans. In the Displacement Method, the structure is idealized as a series of interconnected members. The moments at the ends of each member are calculated by distributing the applied loads and re-distributing the moments until equilibrium is achieved.
3. What are the advantages of using the Displacement Method of Analysis?
Ans. The Displacement Method is advantageous because it can handle complex structures with non-uniform stiffness, provides accurate results for continuous beams and frames, and allows for the consideration of second-order effects.
4. When should the Displacement Method be used in structural analysis?
Ans. The Displacement Method is commonly used for analyzing statically indeterminate structures such as continuous beams, frames, and trusses. It is particularly useful when dealing with structures that exhibit non-linear behavior.
5. What are the limitations of the Displacement Method of Analysis?
Ans. Some limitations of the Displacement Method include the need for iterative calculations, the complexity of applying the method to three-dimensional structures, and the assumption of linear-elastic behavior in the members.
102 docs
Download as PDF
Explore Courses for Civil Engineering (CE) exam

Top Courses for Civil Engineering (CE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

shortcuts and tricks

,

pdf

,

Viva Questions

,

Sample Paper

,

Exam

,

mock tests for examination

,

past year papers

,

Short Notes: Displacement Method of Analysis (Moment Distribution Method) | Short Notes for Civil Engineering - Civil Engineering (CE)

,

Objective type Questions

,

ppt

,

Previous Year Questions with Solutions

,

Short Notes: Displacement Method of Analysis (Moment Distribution Method) | Short Notes for Civil Engineering - Civil Engineering (CE)

,

Free

,

Semester Notes

,

video lectures

,

Important questions

,

Summary

,

Short Notes: Displacement Method of Analysis (Moment Distribution Method) | Short Notes for Civil Engineering - Civil Engineering (CE)

,

practice quizzes

,

MCQs

,

study material

,

Extra Questions

;