The document Notes | EduRev is a part of the JEE Course JEE Main Mock Test Series 2021 & Previous Year Papers.

All you need of JEE at this link: JEE

**Question 1: ****(a) Calculate the rate of heat loss through a glass window of area 1.4 m2 and thickness 3.0 mm if the outside temperature is -20Âº F and the inside temperature is +72Âº F.****(b) A storm window is installed having the same thickness of glass but with an air gap of 7.5 cm between the two windows. What will be the corresponding rate of heat loss presuming that conduction is the only important heat-loss mechanism?****Concept:-**

The rate H at which heat is transferred through the rod is,

(a) directly proportional to the cross-sectional area (A) available.

(b) inversely proportional to the length of the rod Î”x.

(c) directly proportional to the temperature difference Î”T.

So, H = kA Î”T/ Î”x

Here k is the proportionality constant and is called thermal conductivity of the rod.

Again the rate of heat transfer H is defined as,

H = A(T_{2}-T_{1})/âˆ‘R_{n}

= A Î”T/ (R_{g}+ R_{a})

Here A is the area, Î”T is the temperature difference, R_{g} is the thermal resistance of glass

at the thickness 3.0 mm and Ra is the thermal resistance of air at the thickness 7.5 cm.

The thermal resistance or R-value, defined by,

R = L/k

Here L is the thickness of the material through which the heat is transferred and k is the thermal conductivity of the material.**Solution:-**

(a) First we have to find the temperature difference between inside and outside of the glass window.

If T_{2} is the inside temperature and T_{1 }is the outside temperature, then the temperature difference Î”T in Â°C will be,

Î”T = T_{2}-T_{1}

= 5Â°C /9 Â°F (72Â°F â€“(-20 Â° F))

= 51.1 Â°C

= (51.1+273) K

= 324.1 K

To obtain the rate of heat loss through a glass window, substitute 1.0 W/m.K (thermal conductivity of window glass) for k, 1.4 m2 for A, 324.1 K for Î”T and 3.0 mm for Î”x in the equation H = kA Î”T/ Î”x, we get,

H = kA Î”T/ Î”x

= (1.0 W/m.K) (1.4 m^{2}) (324.1 K)/ (3.0 mm)

= (1.0 W/m.K) (1.4 m^{2}) (324.1 K)/ (3.0 mmÃ—10^{-3} m/1 mm)

= 2.4Ã—10^{4} W

From the above observation we conclude that, the rate of heat loss through a glass window would be 2.4Ã—104 W.

(b) First we have to find out the thermal resistance R_{g }of galss at the thickness 3.0 mm and Ra of air at the thickness 7.5 cm.

To obtain the thermal resistance R_{g} of galss at the thickness 3.0 mm, substitute 3.0 mm for L and 1.0 W/m.K (thermal conductivity of window glass) for k in the equation R = L/k,

R_{g} = L/k

= 3.0 mm/1.0 W/m.K

= (3.0 mmÃ—10^{-3} m/1 mm) /(1.0 W/m.K)

= 3.0Ã—10^{-3} m^{2}.K/W

To obtain the thermal resistance Ra of air at the thickness 7.5 cm, substitute 7.5 cm for L and 0.026 W/m.K (thermal conductivity of dry air) for k in the equation R = L/k,

R_{a }= L/k

= 7.5 cm /0.026 W/m.K

= (7.5 cm Ã—10^{-2 }m/1 mm) /(0.026 W/m.K)

= 2.88 m^{2}.K/W

To find out the corresponding rate of heat loss H, substitute 1.4 m^{2} for A,3.0Ã—10-3 m^{2}.K/W for Rg and 2.88 m^{2}.K/W for R_{a} in the equation H = A Î”T/ (R_{g}+ R_{a}), we get,

H = A Î”T/ (R_{g}+ R_{a})

= (1.4 m^{2}) (324.1 K) /(3.0Ã—10^{-3} m^{2}.K/W) (2.88 m^{2}.K/W)

= 25 W

From the above observation we conclude that, the corresponding rate of heat loss H would be 25 W.

**Question 2: ****What mass of steam at 100ÂºC must be mixed with 150 g of ice at 0ÂºC, in a thermally insulated container, to produce liquid water at 50ÂºC?****Concept:-**

The heat capacity per unit mass of a body, called specific heat capacity or usually just specific heat, is characteristic of the material of which the body is composed.

c = C/m

= Q/mÎ”T

So, Q = c mÎ”T

Here, the heat transferred is Q, specific heat capacity is c, mass is m and the temperature difference is Î”T.

The amount of heat per unit mass that must be transferred to produce a phase change is called the heat of transformation or latent heat L for the process. The total heat Q transferred in a phase change is then,

Q = Lm

Here m is the mass of the sample that changes phase.**Solution:-**

The heat given off the steam Q_{s} will be equal to,

Q_{s }= m_{s}L_{v}+ m_{s}c_{w}Î”T

Here, mass of steam is ms, latent heat vaporization is L_{v}, specific heat capacity of water is c_{w} and the temperature difference is Î”T.

The heat taken in by the ice Q_{i} will be equal to,

Q_{i }= m_{i}L_{f}+ m_{i}c_{w}Î”T

Here, mass of ice is mi, latent heat fusion is L_{f}, specific heat capacity of water is cw and the temperature difference is Î”T.

Heat given off the steam Q_{s} is equal to the heat taken in by the ice Q_{i}.

So, Q_{s} = Q_{i}

m_{s}L_{v}+ m_{s}c_{w}Î”T = m_{i}L_{f}+ m_{i}c_{w}Î”T

m_{s}(L_{v}+ c_{w}Î”T) = mi(L_{f}+ c_{w}Î”T)

m_{s} = m_{i}(L_{f}+ c_{w}Î”T)/ (L_{v}+ c_{w}Î”T)

To obtain the mass of the steam at 100 Â°C must be mixed with 150 g of ice at 0 Â°C, substitute 150 g for mass of ice m_{i}, 333Ã—10^{3}J/kg for L_{f}, 4190 J/kg.K for c_{w}, 50Â° C for Î”T, 2256Ã—10^{3} J/kg for L_{v} in the equation m_{s} = m_{i}(L_{f}+ c_{w}Î”T)/ (L_{v}+ c_{w}Î”T), we get,

m_{s} = m_{i}(L_{f}+ c_{w}Î”T)/ (L_{v}+ c_{w}Î”T)

=(150 g)[(333Ã—10^{3} J/kg) +(4190 J/kg.K) (50Â° C)]/ [(2256Ã—10^{3} J/kg)+ (4190 J/kg.K) (50Â° C)]

=(150 gÃ—(10^{-3} kg/1g))[(333Ã—10^{3 }J/kg) +(4190 J/kg.K) (50+273)K]/ [(2256Ã—10^{3} J/kg)+ (4190 J/kg.K) (50+273)K]

= 0.033 kg

From the above observation we conclude that, the mass of steam at 100 Â°C must be mixed with 150 g of ice at 0 Â°C would be 0.033 kg.

**Question 3: ****A small electric immersion heater is used to boil 136 g of water for a cup of instant coffee. The heater is labeled 220 watts. Calculate the time required to bring this water from 23.5ÂºC to the boiling point, ignoring nay heat losses.****Concept:-**

Heat Q that must be given to a body of mass m, whose material has a specific heat c, to increase its temperature from initial temperature T_{i} to final temperature T_{f} is,

Q = m_{c }(T_{f} - T_{i})

But time (t) is equal to the heat energy (Q) divided by power (P).

t = Q/ P

= m_{c} (T_{f }- T_{i})/P**Solution:-**

To obtain the time required to bring this water from 23.5Â° C to the boiling point, substitute 136 g for mass of water m, 4190 J/kg. K for specific heat capacity of water c, 100Â° C for final temperature T_{f} (boiling point of water), 23.5Â° C for initial temperature Ti and 220 watts for power P in the equation t = mc (Tf - Ti)/P,

t = m_{c} (T_{f} - T_{i})/P

= (136 g) (4190 J/kg. K) (100Â° C - 23.5Â° C) / 220 W

= (136 gÃ—10^{-3} kg/1 g) (4190 J/kg. K) (100Â° C - 23.5Â° C) / 220 W

= (0.136 kg) (4190 J/kg. K) ((100+273) K â€“ (23.5 + 273)K) / 220 W

= (0.136 kg) (4190 J/kg. K) (373 K â€“ 296.5 K) / 220 W

= (0.136 kg) (4190 J/kg. K) (76.5 K) / 220 W

= 198.15 s

Rounding off to three significant figures, the time required to bring this water from 23.5Â° C to the boiling point would be 198 s.

Offer running on EduRev: __Apply code STAYHOME200__ to get INR 200 off on our premium plan EduRev Infinity!

3 videos|174 docs|151 tests