Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD PDF Download

Short Review of Trigonometry

First, let’s review the fundamentals.

Triangle Trig

Suppose that triangle ABC is right, and assume that ∠ C is the right angle. To find the sine, cosine, and tangent of ∠ A, just remember: SOHCAHTOA!

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
The tangent can also be defined in terms of sine and cosine — as can the three other trigonometric ratios. Let’s call θ = ∠ A.
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
The Unit Circle

You should also be familiar with the Unit Circle. Each point (x, y) on the circle gives the value of cosine and sine of the corresponding angle.
For example, look for the angle 2π/3 (radians). Based on the unit circle diagram, you know:

  • cos 120° = -1/2.
  • sin 120° = √ 3 /2.

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

Trigonometric Functions

The six basic trig ratios can be extended to functions defined on all (or most) real numbers by interpreting arbitrary angles on the unit circle. The key is that each trig function becomes periodic, which means that values repeat in equal intervals.

It’s important to know the periods, domains, and ranges of each function.

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

The Pythagorean Identities

Perhaps the most famous and useful equation in all of mathematics is the Pythagorean Theorem. (For this and other essentials about triangles, check out: Triangle Properties to Know for the CAT).

When applied to the unit circle, we get a trio of useful trigonometric identities:

Sin2θ +cos2θ = 1,   tan2θ+1 = sec2θ,    1+cot2θ = csc2θ

Other Useful Identities

Of course there are a myriad of other trigonometric identities, including sums or differences of angles, half and double angle formulas, products-to-sums, and sums-to-products, to name a few.

For a summary list, check out this table of trigonometric identities.

CAT Trigonometry Practice Problems

Now let’s test our knowledge and skills!

Q1. You are standing on the corner of a square whose side length is 25 feet. Standing on the opposite corner from you is a tall tree. The angle of elevation from your position to the top of the tree is exactly 60°. How tall is the tree?

A. 25√2
B. 25√3
C. 25√6 

D. 50√3
Answer: 25√6

Explanation -

First find the distance of the diagonal d along the ground from corner to corner. Using Pythagorean theorem with sides 25 and 25, we get:

252 + 252 = d2

2 × 252 = d2

d = 25√ 2 .

Then to obtain the height h of the tree, use the tangent ratio with angle 60°.

tan 60° = x/(25√2)

√3  = x/(25√2)

x = 25√2  × √3  = 25√6

Q2.Tweedledee and Tweedledum are 100 m from each other. Between them there is a tower. Tweedledee notes that the top of the tower is at x°, while Tweedledum records that the top of the tower is at y°. Which expression below correctly computes the height of the tower?

A. 100 tan x° tan y° / (tan x° + tan y°)

B. 100 (tan x° + tan y°) / (tan x° – tan y°)

C. 100 (tan x° + tan y°) / (tan x° tan y°)

D. 100 tan x° tan y° / (tan x° – tan y°)
Answer: 100 tan x° tan y° / (tan x° + tan y°)

Explanation -

First let d represent the distance from Tweedledee to the tower. Then the distance from Tweedledum to the tower must be 100 – d. Next, let h be the height of the tower. So, there are two right triangles, one determined by Tweedledee and the other by Tweedledum, sharing the same height. Finally, use trigonometry to write two equations:

 Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD  Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

Next, solve the first equation for d:

d tan x° = h   →   d = h / tan x°

Now plug this result into the second equation and isolate h.

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

 Q3. What is the maximum value of 8 sin θ + 6 cos θ?

A. 9.5

B. 10
C. 10.3
D. 10.8
Answer: 10

Explanation -

Here, the clue is that 6 and 8 form part of a Pythagorean Triple: 6-8-10.

Let f = 8 sin θ + 6 cos θ, and divide both sides by the constant 10 to get:

f/10 = (8/10) sin θ + (6/10) cos θ

Because 10 is constant, it’s equivalent to find a maximum value for f/10.

Next, we can assume that θ is a first-quadrant angle (otherwise, either its sine value or cosine value would be negative). So construct a right triangle with angle θ.

Now the trick is to compare this triangle to the one whose sides are in ratio 6 : 8 : 10. In fact, in a triangle whose adjacent side is 8 and opposite side is 6, then the hypotenuse would be 10. So, calling the angle of this new triangle φ, we can identify:

Then, sin φ = 6/10 and cos φ = 8/10.

Fortunately, these ratios already show up in our equation. (That’s why I picked the 6-8-10 triangle to compare to!) So we may substitute for the trig ratios:

f/10 = cos φ sin θ + sin φ cos θ

Next, using the sum of angles formula for sine, we could write:

f/10 = sin(φ + θ)

What is the maximum value of this function? Remember, the range of sin x is from -1 up to 1. So the maximum occurs when sin(φ + θ) = 1. This will happen as long as φ + θ = 90°. In other words, the unknown angle θ must be complementary to the angle of a 6-8-10 triangle. That makes our unknown triangle into a 6-8-10 triangle as well!

But the bottom line is that we can find such an angle, and so the maximum sine value (1) will be obtained. Finally, use f/10 = 1 (maximum) to find that f = 10.

Q4. Suppose the angle of elevation of the top of a flag pole changes from x° to 45° as you walk 15 m toward it. Assuming that x < 45, find the height of the flag pole in terms of x.

A. 30(1 + tan x°) / tan x°
B. 45 tan x° / (1 + tan x°)

C. 15 tan x° / (1 + tan x°)

D. 15 tan x° / (1 – tan x°)
Answer: 15 tan x° / (1 – tan x°)

Explanation -

Let h be the height of the flag pole. When you reach the point at which the angle of elevation is exactly 45°, then you are at the base of an isosceles right triangle with height h. Therefore, at that point, you are h meters from the base of the flag pole. Thus your original position was 15 + h meters from the pole.

This information allows us to set up a trigonometric equation:
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD
(15+h) tanx° = h
15tanx° + h tanx° = h
15tanx° + (1 - tanx°)h
Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

The document Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD is a part of the SSC MTS / SSC GD Course Quantitative Aptitude for Competitive Exams.
All you need of SSC MTS / SSC GD at this link: SSC MTS / SSC GD
203 videos|108 docs|112 tests

Top Courses for SSC MTS / SSC GD

FAQs on Short Review of Trigonometry - Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

1. What is trigonometry?
Trigonometry is a branch of mathematics that deals with the relationships between the angles and sides of triangles. It focuses on the trigonometric functions, such as sine, cosine, and tangent, which are used to calculate unknown angles or side lengths.
2. How is trigonometry useful in real life?
Trigonometry is used in various real-life applications, including architecture, engineering, physics, and navigation. For example, it helps architects design buildings with precise angles and measurements, engineers calculate forces and stresses in structures, and pilots navigate through the air using trigonometric principles.
3. What are the primary trigonometric functions?
The primary trigonometric functions are sine (sin), cosine (cos), and tangent (tan). These functions relate the angles in a right triangle to the ratios of the lengths of its sides. The sine of an angle is the ratio of the length of the side opposite the angle to the hypotenuse. The cosine of an angle is the ratio of the length of the adjacent side to the hypotenuse. The tangent of an angle is the ratio of the length of the opposite side to the length of the adjacent side.
4. How do you solve trigonometric equations?
To solve trigonometric equations, you typically manipulate the given equation using trigonometric identities and properties to isolate the variable. You may also use inverse trigonometric functions to find the angles corresponding to specific trigonometric ratios. Additionally, you can use the unit circle or trigonometric graphs to identify periodic solutions.
5. What is the Pythagorean theorem and its connection to trigonometry?
The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the other two sides. This theorem forms the basis for many trigonometric calculations. By using the Pythagorean theorem, you can relate the lengths of the sides of a right triangle and the trigonometric functions of its angles.
203 videos|108 docs|112 tests
Download as PDF
Explore Courses for SSC MTS / SSC GD exam

Top Courses for SSC MTS / SSC GD

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

,

Exam

,

study material

,

Important questions

,

practice quizzes

,

Summary

,

Extra Questions

,

Objective type Questions

,

pdf

,

mock tests for examination

,

ppt

,

Free

,

MCQs

,

Viva Questions

,

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

,

Previous Year Questions with Solutions

,

Semester Notes

,

Short Review of Trigonometry | Quantitative Aptitude for Competitive Exams - SSC MTS / SSC GD

,

Sample Paper

,

video lectures

,

past year papers

,

shortcuts and tricks

;