B Com Exam  >  B Com Notes  >  Macro Economics  >  Introduction to Inflation - Macroeconomics

Introduction to Inflation - Macroeconomics | Macro Economics - B Com PDF Download

Inflation and unemployment are the two most talked-about words in the contemporary society.

These two are the big problems that plague all the economies.

Almost everyone is sure that he knows what inflation exactly is, but it remains a source of great deal of confu­sion because it is difficult to define it unam­biguously.

 

1. Meaning of Inflation:

Inflation is often defined in terms of its supposed causes. Inflation exists when money supply exceeds available goods and services. Or inflation is attributed to budget deficit financing. A deficit budget may be financed by the additional money creation. But the situation of monetary expansion or budget deficit may not cause price level to rise. Hence the difficulty of defining ‘inflation’.

Inflation may be defined as ‘a sustained upward trend in the general level of prices’ and not the price of only one or two goods. G. Ackley defined inflation as ‘a persistent and appreciable rise in the general level or aver­age of prices’. In other words, inflation is a state of rising prices, but not high prices.

It is not high prices but rising price level that con­stitute inflation. It constitutes, thus, an over­all increase in price level. It can, thus, be viewed as the devaluing of the worth of money. In other words, inflation reduces the purchasing power of money. A unit of money now buys less. Inflation can also be seen as a recurring phenomenon.

While measuring inflation, we take into ac­count a large number of goods and services used by the people of a country and then cal­culate average increase in the prices of those goods and services over a period of time. A small rise in prices or a sudden rise in prices is not inflation since they may reflect the short term workings of the market.

It is to be pointed out here that inflation is a state of disequilib­rium when there occurs a sustained rise in price level. It is inflation if the prices of most goods go up. Such rate of increases in prices may be both slow and rapid. However, it is difficult to detect whether there is an upward trend in prices and whether this trend is sus­tained. That is why inflation is difficult to define in an unambiguous sense.

Let’s measure inflation rate. Suppose, in December 2007, the consumer price index was 193.6 and, in December 2008, it was 223.8. Thus, the inflation rate during the last one year was

223.8- 193.6/ 193.6 x 100 = 15.6

As inflation is a state of rising prices, de­flation may be defined as a state of falling prices but not fall in prices. Deflation is, thus, the opposite of inflation, i.e., a rise in the value of money or purchasing power of money. Disinflation is a slowing down of the rate of inflation.

 

2. Types of Inflation:

As the nature of inflation is not uniform in an economy for all the time, it is wise to distin­guish between different types of inflation. Such analysis is useful to study the distribu­tional and other effects of inflation as well as to recommend anti-inflationary policies. Infla­tion may be caused by a variety of factors. Its intensity or pace may be different at different times. It may also be classified in accordance with the reactions of the government toward inflation.

Thus, one may observe different types of inflation in the contemporary society:

 

A. On the Basis of Causes:

(i) Currency inflation:

This type of infla­tion is caused by the printing of cur­rency notes.


(ii) Credit inflation:

Being profit-making institutions, commercial banks sanction more loans and advances to the public than what the economy needs. Such credit expansion leads to a rise in price level.


(iii) Deficit-induced inflation:

The budget of the government reflects a deficit when expenditure exceeds revenue. To meet this gap, the government may ask the central bank to print additional money. Since pumping of additional money is required to meet the budget deficit, any price rise may the be called the deficit-induced inflation.


(iv) Demand-pull inflation:

An increase in aggregate demand over the available output leads to a rise in the price level. Such inflation is called demand-pull in­flation (henceforth DPI). But why does aggregate demand rise? Classical economists attribute this rise in aggre­gate demand to money supply. If the supply of money in an economy ex­ceeds the available goods and services, DPI appears. It has been described by Coulborn as a situation of “too much money chasing too few goods.”

 

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

 

Keynesians hold a different argu­ment. They argue that there can be an autonomous increase in aggregate de­mand or spending, such as a rise in con­sumption demand or investment or government spending or a tax cut or a net increase in exports (i.e., C + I + G + X – M) with no increase in money sup­ply. This would prompt upward adjust­ment in price. Thus, DPI is caused by monetary factors (classical adjustment) and non-monetary factors (Keynesian argument).

DPI can be explained in terms of Fig. 4.2, where we measure output on the horizontal axis and price level on the vertical axis. In Range 1, total spending is too short of full employment out­put, YF. There is little or no rise in the price level. As demand now rises, out­put will rise. The economy enters Range 2, where output approaches towards full employment situation. Note that in this region price level begins to rise. Ul­timately, the economy reaches full em­ployment situation, i.e., Range 3, where output does not rise but price level is pulled upward. This is demand-pull in­flation. The essence of this type of in­flation is that “too much spending chas­ing too few goods.”

 

(v) Cost-push inflation:

Inflation in an economy may arise from the overall increase in the cost of production. This type of inflation is known as cost-push inflation (henceforth CPI). Cost of pro­duction may rise due to an increase in the prices of raw materials, wages, etc. Often trade unions are blamed for wage rise since wage rate is not completely market-determinded. Higher wage means high cost of production. Prices of commodities are thereby increased.

A wage-price spiral comes into opera­tion. But, at the same time, firms are to be blamed also for the price rise since they simply raise prices to expand their profit margins. Thus, we have two im­portant variants of CPI wage-push in­flation and profit-push inflation.


Any­way, CPI stems from the leftward shift of the aggregate supply curve:

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

 

B. On the Basis of Speed or Intensity:


(i) Creeping or Mild Inflation:

If the speed of upward thrust in prices is slow but small then we have creeping inflation. What speed of annual price rise is a creeping one has not been stated by the economists. To some, a creeping or mild inflation is one when annual price rise varies between 2 p.c. and 3 p.c. If a rate of price rise is kept at this level, it is con­sidered to be helpful for economic development. Others argue that if annual price rise goes slightly beyond 3 p.c. mark, still then it is considered to be of no danger.


(ii) Walking Inflation:

If the rate of annual price increase lies between 3 p.c. and 4 p.c., then we have a situation of walking inflation. When mild inflation is allowed to fan out, walking inflation appears. These two types of inflation may be described as ‘moderate inflation’.

Often, one-digit inflation rate is called ‘moder­ate inflation’ which is not only predict­able, but also keep people’s faith on the monetary system of the country. Peoples’ confidence get lost once moderately maintained rate of inflation goes out of control and the economy is then caught with the galloping inflation.


(iii) Galloping and Hyperinflation:

Walking inflation may be converted into running inflation. Running inflation is danger­ous. If it is not controlled, it may ulti­mately be converted to galloping or hyperinflation. It is an extreme form of inflation when an economy gets shatter­ed.”Inflation in the double or triple digit range of 20, 100 or 200 p.c. a year is labelled “galloping inflation”.


(iv) Government’s Reaction to Inflation:

In­flationary situation may be open or suppressed. Because of anti-infla­tionary policies pursued by the govern­ment, inflation may not be an embar­rassing one. For instance, increase in income leads to an increase in con­sumption spending which pulls the price level up.

If the consumption spending is countered by the govern­ment via price control and rationing device, the inflationary situation may be called a suppressed one. Once the government curbs are lifted, the sup­pressed inflation becomes open infla­tion. Open inflation may then result in hyperinflation.

The document Introduction to Inflation - Macroeconomics | Macro Economics - B Com is a part of the B Com Course Macro Economics.
All you need of B Com at this link: B Com
59 videos|61 docs|29 tests

FAQs on Introduction to Inflation - Macroeconomics - Macro Economics - B Com

1. What is inflation and how does it impact the economy?
Ans. Inflation refers to the sustained increase in the general price level of goods and services in an economy over a period of time. It means that the purchasing power of money decreases as prices rise. Inflation can have both positive and negative effects on the economy. On one hand, moderate inflation can stimulate economic growth by encouraging spending and investment. On the other hand, high inflation can erode the value of money, reduce purchasing power, and create uncertainty, leading to economic instability.
2. What are the main causes of inflation?
Ans. Inflation can be caused by various factors, but some of the main causes include: - Demand-pull inflation: This occurs when aggregate demand in the economy exceeds the supply of goods and services, leading to upward pressure on prices. - Cost-push inflation: This occurs when there is an increase in production costs, such as wages or raw material prices, which leads to higher prices for finished goods and services. - Monetary inflation: This occurs when there is an expansion of the money supply in the economy, usually through excessive printing of money by the central bank, leading to a decrease in the value of money.
3. What are the effects of inflation on consumers and businesses?
Ans. The effects of inflation can vary for consumers and businesses: - Consumers: Inflation erodes the purchasing power of consumers' income, meaning they can buy fewer goods and services with the same amount of money. It can lead to a decrease in their standard of living, especially if their income does not keep pace with inflation. However, borrowers may benefit from inflation as the value of their debts decreases. - Businesses: Inflation can impact businesses in various ways. It can increase their production costs, such as wages and raw material prices, which may reduce their profit margins. However, businesses may also be able to increase their prices in response to inflation, maintaining their profit margins. It depends on the elasticity of demand for their products or services.
4. How does inflation affect savers and investors?
Ans. Inflation can have a significant impact on savers and investors: - Savers: Inflation erodes the purchasing power of savings over time. If the interest rates on savings accounts are lower than the rate of inflation, the real value of savings decreases. Therefore, savers need to ensure that their returns on savings are higher than the rate of inflation to preserve their purchasing power. - Investors: Inflation can affect the returns on investments. For example, if the rate of inflation is higher than the return on an investment, the real value of the investment decreases. Investors need to consider the impact of inflation when making investment decisions and aim for investments that provide returns that outpace inflation.
5. How do central banks control inflation?
Ans. Central banks use various tools to control inflation: - Monetary policy: Central banks adjust interest rates to influence borrowing, spending, and investment in the economy. By increasing interest rates, they aim to reduce aggregate demand and control inflation. Conversely, lowering interest rates can stimulate economic activity during periods of low inflation or deflation. - Open market operations: Central banks buy or sell government securities in the open market to control the money supply. By buying securities, they inject money into the economy, increasing the money supply and potentially stimulating economic growth. Selling securities reduces the money supply, which can help curb inflation. - Reserve requirements: Central banks can require commercial banks to hold a certain percentage of their deposits as reserves. By adjusting these requirements, central banks can influence the amount of money that banks can lend, thereby affecting the money supply in the economy and controlling inflation.
59 videos|61 docs|29 tests
Download as PDF
Explore Courses for B Com exam
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Viva Questions

,

Important questions

,

mock tests for examination

,

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

,

Summary

,

past year papers

,

shortcuts and tricks

,

Sample Paper

,

Semester Notes

,

Objective type Questions

,

MCQs

,

study material

,

Extra Questions

,

pdf

,

Free

,

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

,

ppt

,

Previous Year Questions with Solutions

,

practice quizzes

,

Exam

,

Introduction to Inflation - Macroeconomics | Macro Economics - B Com

,

video lectures

;