Ans. A pure substance consists of a single type of particles. A substance is a pure single form of matter.
Q2. List the points of differences between homogeneous and heterogeneous mixtures.
Ans.
Q3. Differentiate between homogeneous and heterogeneous mixtures with examples.
Ans.
Q4. How are sol, solution and suspension different from each other?
Ans.
Q5. To make a saturated solution, 36 g of sodium chloride is dissolved in 100g of water at 293 K. Find its concentration at this temperature.
Ans. Mass of solute (sodium chloride) = 36 g
Q6. How will you separate a mixture containing kerosene and petrol (difference in their boiling points is more than 25°C), which are miscible with each other?
Ans. A mixture of kerosene and petrol which are miscible with each other can be separated by distillation.
Method
Q7. Name the technique to separate (i) butter from curd, (5) salt from sea-water, (iii) camphor from salt.
Ans. (i) Centrifugation, (ii) Evaporation, (iii) Sublimation.
Q8. What type of mixtures are separated by the technique of crystallisation?
Ans. Crystallisation technique is used to purify solid with some impurities in it. Example: Salt from sea-water
Q9. Classify the following as chemical or physical changes:
Ans.
Physical Change | Chemical Change |
|
|
|
|
|
water and then breaking down |
|
into hydrogen and oxygen gas |
|
|
Q10. Try segregating the things around you as pure substances or mixtures.
Ans. Pure substances—Water, bread, sugar and gold.
Mixtures—Steel, plastic, paper, talc, milk and air
NCERT Textual Questions Solve
Q1. Which separation techniques will you apply for the separation of the following?
(a) Sodium chloride from its solution in water.
(b) Ammonium chloride from a mixture containing sodium chloride and ammonium chloride.
(c) Small pieces of metal in the engine oil of a car.
(d) Different pigments from an extract of flower petals.
(e) Butter from curd.
(f) Oil from water.
(g) Tea leaves from tea.
(h) Iron pins from sand.
(i) Wheat grains from husk.
(j) Fine mud particles suspended in water.
Ans. (a) Evaporation
(b) Sublimation
(c) Filtration
(d) Chromatography
(h) Magnetic separation
(g) Filtration
(e) Centrifugation
(f) Separating funnel
(i) Winnowing/sedimentation
(j) Decantation and filtration.
Q2. Write the steps you would use for making tea. Use the words, solution, solvent, solute, dissolve, soluble, insoluble, filtrate and residue.
Ans. 1. Take a cup of water in a container as solvent and heat it.
2. Add sugar in it which is solute. Heat it till all sugar dissolves.
3. You get a solution of water and sugar.
4. Sugar is soluble in water completely.
5. Add half a tea-spoon of tea-leaves, it is insoluble in water.
6. Boil the content, add milk which is also soluble in water, boil again.
7. Filter the tea with the help of strainer, the tea collected in cup is filtrate and the tea leaves collected on the strainer is residue.
Q3. Pragya tested the solubility of three different substances at different temperatures and collected the data as given below (results are given in the following table, as grams of substance dissolved in 100 grams of water to form a saturated solution).
(a) What mass of potassium nitrate would be needed to produce a saturated solution of potassium nitrate in 50 grams of water at 313 K?
(b) Pragya makes a saturated solution of potassium chloride in water at 353 K and leaves the solution to cool at room temperature. What would she observe as the solution cools? Explain.
(c) Find the solubility of each salt at 293 K. Which salt has the highest solubility at this temperature?
(d) What is the effect of change of temperature on the solubility of a salt?
Ans. (a) Mass of KNO3 needed to produce a saturated solution of KNO3 in 100 grams of water at 313 K = 62 g
∴ Mass of KNO3 needed in 50 grams of water at 313 K
(b) Crystals of potassium chloride will be obtained on cooling the saturated solution.
(c) Solubility of each salt at 293 K is
(i) Potassium nitrate → 32 g
(ii) Sodium chloride → 36 g
(iii) Potassium chloride → 35 g
(iv) Ammonium chloride → 37 g
Ammonium chloride has the highest solubility at this temperature.
(d) On increasing the temperature, solubility of a salt increases.
Q4. Explain the following giving examples: (a) Saturated solution (b) Pure substance (c) Colloid (d) Suspension
Ans. (a) Saturated solution: In a given solvent when no more solute can dissolve further at a given temperature is called saturated solution.
(b) Pure substance: A pure substance consists of a single type of particles. E.g., gold, silver.
(c) Colloid: A colloid is a solution in which the size of solute particles are bigger than that of true solution. These particles cannot be seen with our naked eyes, they are stable. e.g., ink, blood.
(d) Suspension: It is a heterogeneous mixture in which the solute particles are big enough to settle down. e.g., chalk-water, paints, etc.
Q5. Classify each of the following as a homogeneous or heterogeneous mixture: soda water, wood, air, soil, vinegar, filtered tea.
Ans. Homogeneous: Soda water, vinegar, filtered tea, air. Heterogeneous: Wood, soil.
Q6. How would you confirm that a colourless liquid given to you is pure water?
Ans. By finding the boiling point of a given colourless liquid. If the liquid boils at 100°C at atmospheric pressure, then it is pure water. This is because pure substances have fixed melting and boiling point.
Q7. Which of the following materials fall in the category of a “pure substance”? (a) Ice (b) Milk (c) Iron (d) Hydrochloric acid (e) Calcium oxide (f) Mercury (g) Brick (h) Wood (i) Air.
Ans. Pure substances are: Ice, iron, hydrochloric acid, calcium oxide and mercury.
Q8. Identify the solutions among the following mixtures. (a) Soil (b) Sea water (c) Air (d) Coal (e) Soda water.
Ans. Solutions are: Sea water, soda water and air.
Q9. Which of the following will show “Tyndall effect”? (a) Salt solution (b) Milk (c) Copper sulphate solution (d) Starch solution.
Ans. Milk and starch solution.
Q10. Classify the following into elements, compounds and mixtures. (a) Sodium (b) Soil (c) Sugar solution (d) Silver (e) Calcium carbonate (f) Tin (g) Silicon (h) Coal (i) Air (j) Soap (k) Methane (l) Carbon dioxide (m) Blood
Ans.
Elements | Compounds | Mixtures |
Sodium | Calcium carbonate | Sugar solution |
Silver | Methane | Soil |
Tin | Carbon dioxide | Coal |
Silicon | Soap | Air |
Blood |
Q11. Which of the following are chemical changes?
(a) Growth of a plant
(b) Rusting of iron
(c) Mixing of iron filings and sand
(d) Cooking of food
(e) Digestion of food
(f) Freezing of water
(g) Burning of a candle.
Ans. Chemical changes are:
(a) Growth of a plant
(b) Rusting of iron
(c) Cooking of food
(d) Digestion of food
(e) Burning of a candle
1. What is matter and why is it important? |
2. What are the characteristics of the three states of matter? |
3. How does the change of state occur in matter? |
4. What is the difference between evaporation and boiling? |
5. How does the process of sublimation occur? |
|
Explore Courses for Class 9 exam
|