Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE) PDF Download

To test a system, generally, standard or basic signals are used. These signals are the basic building blocks for many complex signals. Hence, they play a very important role in the study of signals and systems.

Unit Impulse or Delta Function

A signal, which satisfies the condition, δ(t)=limϵ→∞x(t) is known as unit impulse signal. This signal tends to infinity when t = 0 and tends to zero when t ≠ 0 such that the area under its curve is always equals to one. The delta function has zero amplitude everywhere excunit_impulse.jpgept at t = 0.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Properties of Unit Impulse Signal

  • δ(t) is an even signal.
  • δ(t) is an example of neither energy nor power (NENP) signal.
  • Area of unit impulse signal can be written as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

  • Weight or strength of the signal can be written as;

    y(t)=Aδ(t)
     
  • Area of the weighted impulse signal can be written as −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Unit Step Signal

A signal, which satisfies the following two conditions −

  • U(t)=1(whent≥0)and
  • U(t)=0(whent<0)

is known as a unit step signal.

It has the property of showing discontinuity at t = 0. At the point of discontinuity, the signal value is given by the average of signal value. This signal has been taken just before and after the point of discontinuity (according to Gibb’s Phenomena).

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

If we add a step signal to another step signal that is time scaled, then the result will be unity. It is a power type signal and the value of power is 0.5. The RMS (Root mean square) value is 0.707 and its average value is also 0.5

Ramp Signal

Integration of step signal results in a Ramp signal. It is represented by r(t). Ramp signal also satisfies the condition r(t) = ∫t−∞U(t)dt = tU(t)r(t). It is neither energy nor power (NENP) type signal.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Parabolic Signal

Integration of Ramp signal leads to parabolic signal. It is represented by p(t). Parabolic signal also satisfies he condition  Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)  It is neither energy nor Power (NENP) type signal.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Signum Function

This function is represented as

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

It is a power type signal. Its power value and RMS (Root mean square) values, both are 1. Average value of signum function is zero.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Sinc Function

It is also a function of sine and is written as −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Properties of Sinc function

  • It is an energy type signal.
  • Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)
  • Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE) (Range of sinπ∞ varies between -1 to +1 but anything divided by infinity is equal to zero)
  • Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)
    Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)


Sinusoidal Signal

A signal, which is continuous in nature is known as continuous signal. General format of a sinusoidal signal is

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Here,

A = amplitude of the signal

ω = Angular frequency of the signal (Measured in radians)

φ = Phase angle of the signal (Measured in radians)

The tendency of this signal is to repeat itself after certain period of time, thus is called periodic signal. The time period of signal is given as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

The diagrammatic view of sinusoidal signal is shown below.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Rectangular Function

A signal is said to be rectangular function type if it satisfies the following condition −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Being symmetrical about Y-axis, this signal is termed as even signal.

Triangular Pulse Signal

Any signal, which satisfies the following condition, is known as triangular signal.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

This signal is symmetrical about Y-axis. Hence, it is also termed as even signal.

We have seen that how the basic signals can be represented in Continuous time domain. Let us see how the basic signals can be represented in Discrete Time Domain.

Unit Impulse Sequence

It is denoted as δ(n) in discrete time domain and can be defined as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Unit Step Signal

Discrete time unit step signal is defined as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

The figure above shows the graphical representation of a discrete step function.

Unit Ramp Function

A discrete unit ramp function can be defined as −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

The figure given above shows the graphical representation of a discrete ramp signal.

Parabolic Function

Discrete unit parabolic function is denoted as p(n) and can be defined as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

In terms of unit step function it can be written as;

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

The figure given above shows the graphical representation of a parabolic sequence.

Sinusoidal Signal

All continuous-time signals are periodic. The discrete-time sinusoidal sequences may or may not be periodic. They depend on the value of ω. For a discrete time signal to be periodic, the angular frequency ω must be a rational multiple of 2π.

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

A discrete sinusoidal signal is shown in the figure above.

Discrete form of a sinusoidal signal can be represented in the format −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Here A,ω and φ have their usual meaning and n is the integer. Time period of the discrete sinusoidal signal is given by −

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

Where, N and m are integers.

The document Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE) is a part of the Electronics and Communication Engineering (ECE) Course Digital Signal Processing.
All you need of Electronics and Communication Engineering (ECE) at this link: Electronics and Communication Engineering (ECE)
3 videos|50 docs|54 tests

Top Courses for Electronics and Communication Engineering (ECE)

FAQs on Basic CT & DT Signals - Digital Signal Processing - Electronics and Communication Engineering (ECE)

1. What is the difference between continuous-time (CT) and discrete-time (DT) signals in electrical engineering?
Ans. Continuous-time signals are defined for all values of time, whereas discrete-time signals are defined only at specific instances of time. CT signals are continuous in both time and amplitude, while DT signals are discrete in both time and amplitude.
2. How are CT signals represented mathematically?
Ans. CT signals can be represented mathematically using functions of time, such as sine waves, cosine waves, step functions, or impulse functions. These functions describe the amplitude of the signal at any given time.
3. How are DT signals represented mathematically?
Ans. DT signals are represented mathematically as a sequence of values, where each value corresponds to a specific instance of time. These sequences can be represented as arrays or lists, and can be plotted as discrete points on a graph.
4. What are some applications of CT signals in electrical engineering?
Ans. CT signals are widely used in various applications, such as audio and video processing, communication systems, control systems, analog signal processing, and image processing. They are particularly useful when dealing with continuous physical phenomena.
5. What are some applications of DT signals in electrical engineering?
Ans. DT signals have numerous applications in areas such as digital signal processing, computer systems, data acquisition, control systems, image and video processing, and communication systems. They are especially useful in situations where data is sampled at discrete intervals or stored in digital systems.
3 videos|50 docs|54 tests
Download as PDF
Explore Courses for Electronics and Communication Engineering (ECE) exam

Top Courses for Electronics and Communication Engineering (ECE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

MCQs

,

Viva Questions

,

Extra Questions

,

video lectures

,

Previous Year Questions with Solutions

,

shortcuts and tricks

,

ppt

,

Important questions

,

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

,

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

,

mock tests for examination

,

Objective type Questions

,

Exam

,

Semester Notes

,

practice quizzes

,

study material

,

Sample Paper

,

Basic CT & DT Signals | Digital Signal Processing - Electronics and Communication Engineering (ECE)

,

Summary

,

past year papers

,

Free

,

pdf

;