All Courses
Get the App Signup / Login
Sign in Open App
Mechanical Engineering Exam  >  Mechanical Engineering Notes  >  Heat Transfer  >  GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering PDF Download

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Two rods, one of length L and the other of length 2L are made of the same material and have the same diameter. The two ends of the longer rod are maintained at 100°C. One end of the shorter rod is maintained at 100°C while the other end is insulated. Both the rods are exposed to the same environment at 40°C. The temp at the insulated end of the shorter rod is measured to be 55°C. The temperature at the mid point of the longer rod would be.

[1992]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A fin has 5 mm diameter and 100 mm length. The thermal conductivity of fin material is 400 Wm–1K–1. One end of the fin is maintained at 130°C and its remaining surface is exposed to ambient air at 30°C. If the convective heat transfer coefficient is 40 Wm–2K–1, the heat loss (in W) from the fin is

[2010]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Which one of the following configurations has the highest fin effectiveness?

[2012]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:The heat transfer process between body and its ambient is governed by an Intemal Conductive Resistance (ICR) and an External Convective Resistance (ECR). The body can be considered to be a lumped heat capacity system is

[1989]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Biot number signifies

[1991]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Lumped heat transfer analysis of a solid object suddenly exposed to a fluid medium at a different temp is valid when

[2001]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:The value of Biot number is very small (less than 0.01),when

[2002]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A spherical thermocouple junction of diameter 0.706 mm is to be used for the measurement of temperature of a gas stream. The convective heat transfer coefficient on bead surface is 400 W/m2K, Thermophysical properties of thermocouple material are k = 20 W/mK, c = 400 J/kgK and r = 8500 kg/m3. If the thermocouple initially at 30°C is placed in a hot stream of 300°C, the time taken by the bead to reach 298°C, is

[2004]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A small copper ball of 5 mm diameter at 500 K is dropped into an oil bath whose temperature is 300 K. The thermal conductivity of copper is 400 W/mK, its density 9000 kg/m3 and its specific heat 385 J/kgK. If the heat transfer coefficient is 250 W/m2K and lumped analysis is assumed to be valid, the rate of fall of the temperature of the ball at the beginning of cooling will be, in K/s,

[2005]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:The average heat transfer coefficient on a thin hot vertical -plate suspended in still air can be determined from observations of the change in plate temperature with time as it cools. Assume the plate temperature to be uniform at any instant of time and radiation heat exchange with the surroundings negligible. The ambient temperature is 25°C, the plate has a total surface area of 0.1 m2 and a mass of 4 kg. The specific heat of the plate material is 2.5 kJ/kgK. The convective heat transfer coefficient in W/m2K, at the instant when the plate temperature is 225°C and the change in plate temperature with time dT/dt = – 0.02 K/s, is

[2007]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Consider steady-state heat conduction across the thickness in a plane composite wall (as shown in the figure) exposed to convection conditions on both sides. Given: hi = 20 W/m2K; h0 = 50 W/m2K; T∝i = 20°C; T∝,0 = -2°C; k1 = 20 W/mK; k2 = 50 W/mK; L1 = 0.30 m and L2 = 0.15 m. Assuming negligible contact resistance between the wall surfaces, the interface termperature, T(in °C), of the two walls will be

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering

[2009]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A spherical steel ball of 12 mm diameter is initially at 1000 K. It is slowly cooled in a surrounding of 300 K. The heat transfer coefficient between the steel ball and the surroundings is 5 W/m2K. The thermal conductivity of steel is 20 W/mK. The ternperature difference between the centre and the surface of the steel ball is

[2011]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A steel ball of diameter 60 mm is initially in thermal equilibrium at 1030°C in a furnace. It is suddenly removed from the furnace and cooled in ambient air at 30°C, with convective heat transfer coefficient h = 20 W/m2K. The thermophysical properties of steel are : density ρ = 7800 kg/m2, conductivity k =40 W/mK and specific heat c - 600 J/kgK. The time required in seconds to cool the steel ball in air from 1030°C to 430°C is

[2013]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:Biot number signifies the ratio of

[2014]

View Solution

Question for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
Try yourself:A metal ball of diameter 60 mm is initially at 220°C. The ball is suddenly cooled by an air jet of 20°C. The heat transfer coefficient is 200 W/m2K. The specific heat, thermal conductivity and density of the metal ball are 400 J/kgK, 400 W/mK and 9000 kg/m3, respectively. The ball temperature (in °C) after 90 seconds will be approximately

[2017]

View Solution

The document GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering is a part of the Mechanical Engineering Course Heat Transfer.
All you need of Mechanical Engineering at this link: Mechanical Engineering
57 videos|77 docs|86 tests
Join Course for Free

Top Courses for Mechanical Engineering

FAQs on GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) - Heat Transfer - Mechanical Engineering

1. What is the significance of fins in heat transfer?
Ans. Fins are extended surfaces that are used to enhance heat transfer in various engineering applications. They are commonly used in heat exchangers, radiators, and cooling systems to increase the surface area available for heat transfer. Fins help to improve the efficiency of heat transfer by increasing the rate at which heat is dissipated or absorbed. This is achieved by providing additional surface area for conduction and convection heat transfer processes.
2. How does unsteady heat transfer differ from steady-state heat transfer?
Ans. Unsteady heat transfer refers to the process of heat transfer that occurs when there is a time variation in the temperature distribution within a system. It occurs when there are changes in the boundary conditions or when the system is undergoing transient heating or cooling. On the other hand, steady-state heat transfer refers to the process of heat transfer where the temperature distribution within a system remains constant over time. In steady-state heat transfer, the heat flux remains constant and there is no change in the boundary conditions.
3. What are the main modes of heat transfer in conduction and convection?
Ans. In conduction, heat transfer occurs through direct molecular interaction between particles within a solid or between adjacent solids. It is primarily driven by temperature gradients and occurs in materials with good thermal conductivity. In convection, heat transfer occurs through the bulk movement of fluid particles, such as air or water. It can be further classified into natural convection, which is driven by density differences due to temperature variations, and forced convection, which is induced by external means such as fans or pumps.
4. How can fins be optimized for maximum heat transfer efficiency?
Ans. Fins can be optimized for maximum heat transfer efficiency by considering various factors such as fin geometry, material selection, and heat transfer coefficients. Increasing the fin height and thickness can enhance heat transfer, but it also increases the pressure drop across the fins. The choice of material should have high thermal conductivity to facilitate efficient heat conduction. Additionally, optimizing the fin shape and spacing can help to minimize the resistance to fluid flow and maximize convective heat transfer.
5. What are some applications of unsteady heat transfer in mechanical engineering?
Ans. Unsteady heat transfer has various applications in mechanical engineering. One common application is in the analysis and design of engine components, where transient heating and cooling cycles occur. It is also important in the design of cooling systems for electronic devices, as they often experience rapid temperature changes. Unsteady heat transfer is also relevant in the analysis of thermal storage systems, such as phase change materials, which store and release heat during phase transitions.
Related Exams
About this Document
4.65/5 Rating
Dec 22, 2024 Last updated
Document Description: GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) for Mechanical Engineering 2024 is part of Heat Transfer preparation. The notes and questions for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) have been prepared according to the Mechanical Engineering exam syllabus. Information about GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) covers topics like and GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Example, for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises and tests below for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection).
Introduction of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) in English is available as part of our Heat Transfer for Mechanical Engineering & GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) in Hindi for Heat Transfer course. Download more important topics related with notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Mechanical Engineering: GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering
Description
Full syllabus notes, lecture & questions for GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering - Mechanical Engineering | Plus excerises question with solution to help you revise complete syllabus for Heat Transfer | Best notes, free PDF download
Information about GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)
In this doc you can find the meaning of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) defined & explained in the simplest way possible. Besides explaining types of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) theory, EduRev gives you an ample number of questions to practice GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) tests, examples and also practice Mechanical Engineering tests
57 videos|77 docs|86 tests
Join Course for Free
Download as PDF
Explore Courses for Mechanical Engineering exam

Top Courses for Mechanical Engineering

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering

,

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering

,

Viva Questions

,

Free

,

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) | Heat Transfer - Mechanical Engineering

,

practice quizzes

,

Objective type Questions

,

pdf

,

MCQs

,

Semester Notes

,

study material

,

Exam

,

shortcuts and tricks

,

Previous Year Questions with Solutions

,

Sample Paper

,

Extra Questions

,

video lectures

,

Summary

,

ppt

,

mock tests for examination

,

Important questions

,

past year papers

;
Additional Information about GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) for Mechanical Engineering Preparation

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Free PDF Download

The GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) is an invaluable resource that delves deep into the core of the Mechanical Engineering exam. These study notes are curated by experts and cover all the essential topics and concepts, making your preparation more efficient and effective. With the help of these notes, you can grasp complex subjects quickly, revise important points easily, and reinforce your understanding of key concepts. The study notes are presented in a concise and easy-to-understand manner, allowing you to optimize your learning process. Whether you're looking for best-recommended books, sample papers, study material, or toppers' notes, this PDF has got you covered. Download the GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) now and kickstart your journey towards success in the Mechanical Engineering exam.

Importance of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection)

The importance of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) cannot be overstated, especially for Mechanical Engineering aspirants. This document holds the key to success in the Mechanical Engineering exam. It offers a detailed understanding of the concept, providing invaluable insights into the topic. By knowing the concepts well in advance, students can plan their preparation effectively. Utilize this indispensable guide for a well-rounded preparation and achieve your desired results.

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Notes

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Notes offer in-depth insights into the specific topic to help you master it with ease. This comprehensive document covers all aspects related to GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection). It includes detailed information about the exam syllabus, recommended books, and study materials for a well-rounded preparation. Practice papers and question papers enable you to assess your progress effectively. Additionally, the paper analysis provides valuable tips for tackling the exam strategically. Access to Toppers' notes gives you an edge in understanding complex concepts. Whether you're a beginner or aiming for advanced proficiency, GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Notes on EduRev are your ultimate resource for success.

GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Mechanical Engineering

The "GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) Mechanical Engineering Questions" guide is a valuable resource for all aspiring students preparing for the Mechanical Engineering exam. It focuses on providing a wide range of practice questions to help students gauge their understanding of the exam topics. These questions cover the entire syllabus, ensuring comprehensive preparation. The guide includes previous years' question papers for students to familiarize themselves with the exam's format and difficulty level. Additionally, it offers subject-specific question banks, allowing students to focus on weak areas and improve their performance.

Study GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) on the App

Students of Mechanical Engineering can study GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) alongwith tests & analysis from the EduRev app, which will help them while preparing for their exam. Apart from the GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection), students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc. The EduRev App will make your learning easier as you can access it from anywhere you want. The content of GATE Past Year Questions: Fins & Unsteady Heat Transfer (Conduction & Convection) is prepared as per the latest Mechanical Engineering syllabus.
© EduRev
Education Revolution
Signup to see your scores go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup